MC14070B, MC14077B CMOS SSI Quad Exclusive "OR" and "NOR" Gates The MC14070B quad exclusive OR gate and the MC14077B quad exclusive NOR gate are constructed with MOS P-channel and N-channel enhancement mode devices in a single monolithic structure. These complementary MOS logic gates find primary use where low power dissipation and/or high noise immunity is desired. http://onsemi.com MARKING DIAGRAMS * Supply Voltage Range = 3.0 Vdc to 18 Vdc * All Outputs Buffered * Capable of Driving Two Low-Power TTL Loads or One Low-Power * * * 14 PDIP-14 P SUFFIX CASE 646 Schottky TTL Load Over the Rated Temperature Range Double Diode Protection on All Inputs MC14070B -- Replacement for CD4030B and CD4070B Types MC14077B -- Replacement for CD4077B Type MC140xxBCP AWLYYWW 1 14 SOIC-14 D SUFFIX CASE 751A 140xxB AWLYWW 1 MAXIMUM RATINGS (Voltages Referenced to VSS) (Note 2.) Value Unit -0.5 to +18.0 V -0.5 to VDD + 0.5 V Input or Output Current (DC or Transient) per Pin 10 mA PD Power Dissipation, per Package (Note 3.) 500 mW TA Ambient Temperature Range -55 to +125 C Tstg Storage Temperature Range -65 to +150 C TL Lead Temperature (8-Second Soldering) 260 C Symbol VDD Vin, Vout Iin, Iout Parameter 14 DC Supply Voltage Range Input or Output Voltage Range (DC or Transient) This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS (Vin or Vout) VDD. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left open. August, 2000 - Rev. 4 1 MC140xxB ALYW 1 xx A WL, L YY, Y WW, W = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week ORDERING INFORMATION Device 2. Maximum Ratings are those values beyond which damage to the device may occur. 3. Temperature Derating: Plastic "P and D/DW" Packages: - 7.0 mW/C From 65C To 125C Semiconductor Components Industries, LLC, 2000 SOEIAJ-14 F SUFFIX CASE 965 Package Shipping MC140XXBCP PDIP-14 2000/Box MC140XXBD SOIC-14 2750/Box MC140XXBDR2 SOIC-14 2500/Tape & Reel MC140XXBF SOEIAJ-14 See Note 1. MC140XXBFEL SOEIAJ-14 See Note 1. 1. For ordering information on the EIAJ version of the SOIC packages, please contact your local ON Semiconductor representative. Publication Order Number: MC14070B/D MC14070B, MC14077B PIN ASSIGNMENT IN 1A 1 14 VDD IN 2A 2 13 IN 2D OUTA 3 12 IN 1D OUTB 4 11 OUTD IN 1B 5 10 OUTC IN 2B 6 9 IN 2C VSS 7 8 IN 1C MC14070B QUAD Exclusive OR Gate 1 MC14077B QUAD Exclusive NOR Gate 1 3 2 5 4 6 8 10 9 12 11 13 3 2 5 4 6 8 10 9 12 11 13 VDD = PIN 14 VSS = PIN 7 (BOTH DEVICES) 20 ns VDD Vin VDD 90% 50% 10% Vin IDD 20 ns 1/f 50% DUTY CYCLE * VSS CL *Inverted output on MC14077B only. Figure 1. Power Dissipation Test Circuit and Waveform PULSE GENERATOR INPUT * # VSS 20 ns 20 ns VDD tPHL CL OUTPUT 90% 50% 10% tTHL *Inverted output on MC14077B only. #Connect unused input to VDD for MC14070B, to VSS for MC14077B. Figure 2. Switching Time Test Circuit and Waveforms http://onsemi.com 2 VDD 90% 50% 10% tPLH tTLH VSS VOH VOL MC14070B, MC14077B IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIII II IIIIII IIIIIIII IIIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIII II IIII III III IIII III III III I II IIIIII IIIIIIII IIIII III IIIIIIIIIII IIII II IIII III III IIII III III III III IIIIIIIIIII IIII II IIII III III IIII III III III III II IIIIIIIIIII IIII IIII III III IIII III III III III IIIIIIIIIII IIII II IIII III III IIII III III III III II IIIIIIIIIII IIII IIII III III IIII III III III III IIIIIIIIIII IIIIII IIII III III IIII III III III III IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIII II IIII III III IIII III III III III IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIIIII IIII III III IIII III III III III IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIII IIII III III IIII III III III III II II IIIIIIIIIII IIII IIII III III IIII III III III III IIIIIIIIIII IIII II IIII III III IIII III III III III IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIII II IIII III III IIII III III III III IIIIIIIIIII IIII II IIII III III IIII III III III III IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIII II IIII III III IIII III III III III II IIIIIIIIIIIIIIIII IIIIIIIIIII IIII IIII III III IIII III III III III IIIIIIIIIII IIII II IIIIIIIIIIIIIIIII III IIIIIIIIIII IIII IIIIIIIIIIIIIIIII III II IIIIIIIIIII IIII IIIIIIIIIIIIIIIII III II IIII III III IIII III III III IIIIIIIIIII IIII IIIIIIIIIIIIIIIII III II IIIIIIIIIII IIII II IIII III III IIII III III III III IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIII IIII III III IIII III III III III II II IIIIIIIIIII IIII IIII III III IIII III III III III IIIIIIIIIII IIIIII IIII III III IIII III III III III IIIIIIIIIII IIII IIII III III IIII III III III III II IIIIIIIIIII IIIIII IIII III III IIII III III III III ELECTRICAL CHARACTERISTICS (Voltages Referenced to VSS) Characteristic Output Voltage Vin = VDD or 0 Symbol - 55C 25C 125C VDD Vdc Min Max Min Typ (4.) Max Min Max Unit "0" Level VOL 5.0 10 15 -- -- -- 0.05 0.05 0.05 -- -- -- 0 0 0 0.05 0.05 0.05 -- -- -- 0.05 0.05 0.05 Vdc "1" Level VOH 5.0 10 15 4.95 9.95 14.95 -- -- -- 4.95 9.95 14.95 5.0 10 15 -- -- -- 4.95 9.95 14.95 -- -- -- Vdc "0" Level VIL 5.0 10 15 -- -- -- 1.5 3.0 4.0 -- -- -- 2.25 4.50 6.75 1.5 3.0 4.0 -- -- -- 1.5 3.0 4.0 5.0 10 15 3.5 7.0 11 -- -- -- 3.5 7.0 11 2.75 5.50 8.25 -- -- -- 3.5 7.0 11 -- -- -- 5.0 5.0 10 15 - 3.0 - 0.64 - 1.6 - 4.2 -- -- -- -- - 2.4 - 0.51 - 1.3 - 3.4 - 4.2 - 0.88 - 2.25 - 8.8 -- -- -- -- - 1.7 - 0.36 - 0.9 - 2.4 -- -- -- -- IOL 5.0 10 15 0.64 1.6 4.2 -- -- -- 0.51 1.3 3.4 0.88 2.25 8.8 -- -- -- 0.36 0.9 2.4 -- -- -- mAdc Input Current Iin 15 -- 0.1 -- 0.00001 0.1 -- 1.0 Adc Input Capacitance (Vin = 0) Cin -- -- -- -- 5.0 7.5 -- -- pF Quiescent Current (Per Package) IDD 5.0 10 15 -- -- -- 0.25 0.5 1.0 -- -- -- 0.0005 0.0010 0.0015 0.25 0.5 1.0 -- -- -- 7.5 15 30 Adc IT 5.0 10 15 Vin = 0 or VDD Input Voltage (VO = 4.5 or 0.5 Vdc) (VO = 9.0 or 1.0 Vdc) (VO = 13.5 or 1.5 Vdc) "1" Level VIH (VO = 0.5 or 4.5 Vdc) (VO = 1.0 or 9.0 Vdc) (VO = 1.5 or 13.5 Vdc) Output Drive Current (VOH = 2.5 Vdc) (VOH = 4.6 Vdc) (VOH = 9.5 Vdc) (VOH = 13.5 Vdc) Vdc Vdc IOH Source (VOL = 0.4 Vdc) (VOL = 0.5 Vdc) (VOL = 1.5 Vdc) Sink Total Supply Current (5.) (6.) (Dynamic plus Quiescent, Per Package) (CL = 50 pF on all outputs, all buffers switching) Output Rise and Fall Times (5.) (CL = 50 pF) tTLH, tTHL = (1.35 ns/pF) CL + 33 ns tTLH, tTHL = (0.60 ns/pF) CL + 20 ns tTLH, tTHL = (0.40 ns/pF) CL + 20 ns tTLH, tTHL Propagation Delay Times (5.) (CL = 50 pF) tPLH, tPHL = (0.90 ns/pF) CL + 130ns tPLH, tPHL = (0.36 ns/pF) CL + 57 ns tPLH, tPHL = (0.26 ns/pF) CL + 37 ns tPLH, tPHL mAdc IT = (0.3 A/kHz) f + IDD IT = (0.6 A/kHz) f + IDD IT = (0.9 A/kHz) f + IDD Adc ns 5.0 10 15 -- -- -- -- -- -- -- -- -- 100 50 40 200 100 80 -- -- -- -- -- -- ns 5.0 10 15 -- -- -- -- -- -- -- -- -- 175 75 55 350 150 110 -- -- -- -- -- -- 4. Data labelled "Typ" is not to be used for design purposes but is intended as an indication of the IC's potential performance. 5. The formulas given are for the typical characteristics only at 25C. 6. To calculate total supply current at loads other than 50 pF: IT(CL) = IT(50 pF) + (CL - 50) Vfk where: IT is in H (per package), CL in pF, V = (VDD - VSS) in volts, f in kHz is input frequency, and k = 0.002. http://onsemi.com 3 MC14070B, MC14077B PACKAGE DIMENSIONS P SUFFIX PLASTIC DIP PACKAGE CASE 646-06 ISSUE M 14 8 1 7 B A F L N C -T- SEATING PLANE J K H G D 14 PL 0.13 (0.005) M M http://onsemi.com 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M N INCHES MIN MAX 0.715 0.770 0.240 0.260 0.145 0.185 0.015 0.021 0.040 0.070 0.100 BSC 0.052 0.095 0.008 0.015 0.115 0.135 0.290 0.310 --10 0.015 0.039 MILLIMETERS MIN MAX 18.16 18.80 6.10 6.60 3.69 4.69 0.38 0.53 1.02 1.78 2.54 BSC 1.32 2.41 0.20 0.38 2.92 3.43 7.37 7.87 --10 0.38 1.01 MC14070B, MC14077B PACKAGE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751A-03 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. -A- 14 8 -B- 1 P 7 PL 0.25 (0.010) 7 G B M M F R X 45 C -T- SEATING PLANE 0.25 (0.010) M K D 14 PL M T B S A S http://onsemi.com 5 J DIM A B C D F G J K M P R MILLIMETERS MIN MAX 8.55 8.75 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0 7 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.337 0.344 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0 7 0.228 0.244 0.010 0.019 MC14070B, MC14077B PACKAGE DIMENSIONS F SUFFIX PLASTIC EIAJ SOIC PACKAGE CASE 965-01 ISSUE O 14 LE 8 Q1 E HE L 7 1 M DETAIL P Z D VIEW P A e c A1 b 0.13 (0.005) M 0.10 (0.004) http://onsemi.com 6 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 5. THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.018). DIM A A1 b c D E e HE 0.50 LE M Q1 Z MILLIMETERS MIN MAX --2.05 0.05 0.20 0.35 0.50 0.18 0.27 9.90 10.50 5.10 5.45 1.27 BSC 7.40 8.20 0.50 0.85 1.10 1.50 10 0 0.70 0.90 --1.42 INCHES MIN MAX --0.081 0.002 0.008 0.014 0.020 0.007 0.011 0.390 0.413 0.201 0.215 0.050 BSC 0.291 0.323 0.020 0.033 0.043 0.059 10 0 0.028 0.035 --0.056 MC14070B, MC14077B Notes http://onsemi.com 7 MC14070B, MC14077B ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2745 Email: r14525@onsemi.com EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK For additional information, please contact your local Sales Representative. http://onsemi.com 8 MC14070B/D