MVME7100 Series VMEbus Single-Board Computer The MVME7100 adds performance and features while protecting the fundamental investment in VMEbus and related technologies nn Up to 1.3 GHz system-on-chip Freescale MPC864xD with dual PowerPC(R) e600 processor cores, dual integrated memory controllers, DMA engine, PCI Express interface, Ethernet, and local I/O nn Four Gigabit Ethernet ports nn Up to 2GB of DDR2 ECC memory, 128MB NOR flash and 4 or 8GB NAND flash nn USB 2.0 controller for integrating cost-effective peripherals nn 2eSST VMEbus protocol with 320MB/s transfer rate across the VMEbus nn Board support packages for VxWorks, LynxOS, and Linux nn Dual 33/66/100MHz PMC-X sites for expansion via industry standard modules with support for processor PMCs nn 8x PCI Express expansion connector for PMC-X and XMC expansion using Emerson XMCspan nn MVME7216E direct-connect rear transition module (RTM) for I/O routing through rear of a VMEbus chassis The Emerson Network Power MVME7100, one of the first VMEbus products with the system-on-chip MPC864xD processor, offers a growth path for VMEbus customers with applications on the previous generation of VME, specifically the MPC74xx processors. The system-on-chip implementation offers power/thermal, reliability, and lifecycle advantages not typically found in alternative architectures. The Emerson MVME7100 single-board computer (SBC) helps OEMs of industrial, medical, and defense/aerospace VMEbus platforms add performance and features for competitive advantage while still protecting the fundamental investment in VMEbus and related technologies. Customers can keep their VMEbus infrastructure (chassis, backplanes, and other VMEbus and PMC boards) while improving performance and extending the lifecycle. Also, the extended lifecycle of Emerson computing products helps reduce churns in development and support efforts resulting from frequent product changes. The faster processor and 2eSST VMEbus interface combine to offer significant performance improvement. New cost-effective peripherals can be integrated easily using USB interfaces. MVME7100 Block Diagram ABT/RST USB GbE RJ-45 GbE RJ-45 PMC1 Front I/O COM PMC2 Front I/O Front Panel PHY 5482 Up to 2GB DDR2 Memory XCVR RS-232 Serial Port 0 GbE 1 GbE 2 GbE 3 GbE 4 User 128KB DDR2 MC DUART TSEC1 TSEC2 MPC864xD Processor TSEC3 PCI Express PCI Express Serial Ports 1-4 USB PD720101 E2P PEX8114 E2P PEX8114 PMC 1 PMC 2 GbE 4 COM2 - COM5 PMC 1 Jn4 IO Flash 4 or 8GB MRAM 512KB E2P PEX8114 VME TSi148 XCVR 22501 I2C Bus P2 Overview VMEbus 2eSST Performance The 2eSST protocol offers an available VME bus bandwidth of up to 320MB/s, an increase of up to 8x over VME64, while maintaining backward compatibility with VME64 and VME32. The combination of the latest Texas Instruments VMEbus transceivers and the Tundra Tsi148 VMEbus bridge's legacy protocol support allows customers to integrate the MVME7100 series into their existing infrastructure providing backward compatibility and thereby preserving their investment in existing VMEbus boards, backplanes, chassis and software. Balanced Performance The MVME7100 series provides more than just faster VMEbus transfer rates; it provides balanced performance from the processor, memory subsystem, local busses and I/O subsystems. This coupled with a wealth of I/O interfaces make the MVME7100 series ideal for use as an application-specific compute blade, or an intelligent I/O blade/carrier. The Freescale MPC864xD system-onchip (SoC) processor, running at speeds up to 1.3 GHz, 2 Flash 128MB Temp MAX6649 VME Bus XCVR RS-232 GbE 3 CPLD Decode Timers/Regs PCI Express Switch PHY 5482 E2P PEX8112 Device Bus QUART 16C554 XMCspan VPD 8KB I2C Bus I2C Bus LBC TSEC4 RTC DS1375 P1 is well-suited for I/O and data-intensive applications. The integrated SoC design creates an I/O intensive state-of-the-art package that combines dual low power processing cores with on-chip L2 cache and dual integrated DDR2 memory controllers, PCI Express, DMA , Ethernet and local device I/O. The on-chip PCI Express interface and dual DDR2 memory busses are well matched to the processor. To ensure optimal I/O performance, the 8x PCI Express port is connected to a five-port PCI Express switch. Three 4x PCI Express ports are connected to PCI Express-to-PCI-X bridges which provide independent PCI-X busses for the two PMC-X sites and VME bus interface. A 1x PCI Express port is connected to a PCI Express-to-PCI bridge which is connected to the USB chip. The MVME7100 also offers quad Gigabit Ethernet interfaces, USB 2.0, and five (5) RS-232 serial connections. All of this adds up to a set of well-balanced, high-performance subsystems offering unparalleled performance. Backward Compatibility The MVME7100 series continues the direction of providing a migration path from Emerson's embedded controllers such as the MVME16x, MVME17x, MVME2300/MVME2400, and from Emerson SBCs such as the MVME2600/2700 to a single platform. The MVME7100 series, like the MVME3100, MVME5100, MVME5500, and MVME6100 series, merged the best features of Emerson's embedded controllers and SBCs enabling OEMs to support varying I/O requirements with the same base platform, simplifying part number maintenance, technical expertise requirements, and sparing. The MVME7100 series offers customers an alternate migration path from the MVME2100, MVME2300, MVME2400, MVME2600, MVME2700, MVME3100, MVME5100, MVME5500 and MVME6100 boards to allow them to take advantage of features such as the integrated MPC864xD SoC processor, DDR2 memory, Gigabit Ethernet, PCI-X, PCI Express, USB, and 2eSST. PCI Expansion The MVME7100 has an 8x PCI Express connection to support PCI Express expansion carriers such as the Emerson XMCspan. Transition Modules The MVME7216E transition module provides industrystandard connector access to two 10/100/1000BaseTX ports, and four asynchronous serial ports configured as RS-232 DTE. All of these are via RJ-45 connectors. The MVME7216E RTM is designed to directly connect to the VME backplane in chassis' with an 80mm deep rear-transition area. Software Support Firmware Monitor The MVME7100 firmware (known as MOTLoad) is resident in the MVME7100 flash and provides power-on self-test, initialization and operating system booting capabilities. In addition, it provides a debugger interface similar to the time proven "BUG" interface on previous VMEbus boards from Emerson. Operating Systems and Kernels The MVME7100 series supports booting a variety of operating systems including a complete range of real-time operating systems and kernels. Emerson Network Power Embedded Computing Linux (2.6.25 kernel) is available now. VxWorks BSPs (5.5.1 AMP, 6.6 AMP & 6.6 SMP) are provided and supported by Wind River Systems. Also in development are Linux kernels from Sysgo, Timesys and LynuxWorks. Specifications Processor cc Microprocessor: Freescale MPC864xD with dual PowerPC e600 cores cc Clock Frequency: 1.06 or 1.3 GHz cc On-chip L1 Cache (I/D): 32K/32K per core cc On-chip L2 Cache: 1MB per core System Controller Integrated within MPC864xD Main Memory Type: Double data rate (DDR2) SDRAM Speed: DDR2-533 Capacity: 1GB or 2GB Configuration: Dual memory controller Flash Memory Type: NOR flash, on-board programmable cc Capacity: 128MB cc Write Protection: Hardware via switch, software via register or sector lock Type: NAND flash, on-board programmable cc Capacity: 4GB or 8GB cc Write Protection: Software via register cc Supported by YAFFS (Linux) or Datalight FlashFX Pro (VxWorks) under separate license Non-volatile Memory Type: SEEPROM, on-board programmable cc Capacity: 128KB (available for users), 8KB baseboard Vital Product Data (VPD), and two (2) 256B Serial Presence Detect (SPD) Type: MRAM cc Capacity: 512KB VMEbus Interface Compliance: ANSI/VITA 1-1994 VME64 (IEEE STD 1014), ANSI/VITA 1.1-1997 VME64 Extensions, VITA 1.5-199x 2eSST Controller: Tundra Tsi148 PCI-X to VMEbus bridge with support for VME64 and 2eSST protocols 3 DTB Master: A16, A24, A32, A64; D08-D64, SCT, BLT, MBLT, 2eVME, 2eSST Signaling: 3.3V DTB Slave: A16, A24, A32, A64; D08-D64, SCT, BLT, MBLT, 2eVME, 2eSST, UAT Module Types: Two single-wide or one doublewide, front panel or P2 I/O, PMC and PrPMC support, PMC1 site Pn4 routed to VMEbus P2 connector rows A and C Arbiter: RR/PRI Interrupt Handler/Generator: IRQ 1-7/Any one of seven IRQs System Controller: Yes, switchable or auto detect PCI Expansion Connector for interface to XMCSPAN boards Location Monitor: Two, LMA32 8x PCI Express interface Ethernet Interface One 76-pin connector located on MVME7100 planar Controller: MPC864xD Triple Speed (TSEC) Ethernet Controllers Interface Speed: Four @ 10/100/1000Mbps (TSEC) Counters/Timers TOD Clock Device: Maxim DS1375 I2C device with battery backup Connector: Two Gigabit Ethernet ports routed to front panel RJ-45, two Gigabit Ethernet ports to VMEbus P2 connector, pin out matching MVME7216E RTM Cell Storage Life: 10 years at 25 C Indicators: Link status/speed/activity Removable Battery: Yes Asynchronous Serial Ports Real-Time Timers/Counters: Four, 32-bit programmable timers in PLD; four, 32-bit programmable/ cascadable timers in MPC864xD Port 1 Cell Capacity Life: One year at 100% duty cycle, 25 C cc Controller: MPC864xD Duart (second port N/C) Watchdog Timer: In PLD cc Number of Ports: One 16550 compatible Board Size and Weight cc Configuration: RS-232 DTE (RxD, TxD, RTS, CTS) Height: 233.4 mm (9.2 in.) cc Async Baud Rate, bps max.: 38.4K RS-232, 115Kbps raw Depth: 160.0 mm (6.3 in.) cc Connector: One front panel Mini DB-9 cc Mini DB-9 to DB-9 adapter cable: SERIAL-MINI-D2 Ports 2-5 Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) Max. Component Height: 14.8 mm (0.58 in.) Weight: .68 kg (1.5 lbs.) cc Controller: Exar ST16C544D Quart cc Number of Ports: Four 16550 compatible Power Requirements cc Configuration: RS-232 (RxD, TxD, RTS, CTS) Board Variant Power (+5V 5%) cc Async Baud Rate, b/s max: 38.4K RS-232, 115Kbps raw Typical: 40W Maximum: 55W cc Connector: Via VMEbus P2 connector, pinout matching MVME7216E RTM MVME7100-0161 MVME7100-0163 Typical: 40W Maximum: 55W MVME7100-0171 Typical: 45W Maximum: 60W MVME7100-0173 Typical: 45W Maximum: 60W USB Interface cc Controller: NEC 720101 cc Configuration: USB 2.0 cc Number of ports: One cc Connector: One powered port routed to front panel Dual IEEE P1386.1 PCI Mezzanine Card Slots Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors (PN4 for PMC1 only) PCI Bus Clock: 33 MHz, 66 MHz or 100 MHz PCI/ PCI-X 4 Power: +3.3V, +5V, 12V Calculated MTBF TBD All Modules Other Features RoHS compliant Jumper-less configuration Environmental Operating Non-operating Temperature: 0 C to +55 C (inlet air temp. with forced air cooling) -40 C to +85 C IEEE or Scanbe handles Humidity (NC): 5% to 90% 5% to 90% Connectors for serial, Gigabit Ethernet and USB ports Vibration: 1 G RMS, 5-100 Hz sine 2 G RMS, 15-2000 Hz sine 0.01g2/Hz (4.5 GRMS) 15-2000 Hz random Shock: 20 G peak (half sine) 11ms On-board temperature sensor (Maxim MAX6649) JTAG header for connection of diagnostic tools Front Panel Openings for PMC sites Transition Modules I/O Connectors MVME7216E cc cc Asynchronous Serial Ports: Four, RJ-45, labeled as COM2-5 Ethernet: Two 10/100/1000BaseTX, RJ-45 Non-Volatile Storage 8KB VPD SEEPROM Safety All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. Electromagnetic Compatibility (EMC) Board Size Height: 233.4 mm (9.2 in.) Depth: 80.0 mm (3.1 in.) Front Panel Height: 261.8 mm (10.3 in.) Front Panel Width: 19.8 mm (0.8 in.) Calculated MTBF TBD Intended for use in systems meeting the following regulations: cc U.S.: FCC Part 15, Subpart B, Class A (non-residential) cc Canada: ICES-003, Class A (non-residential) Emerson board products are tested in a representative system to the following standards, results pending: cc CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 Ordering Information Part Number Description MVME7100-0161 1.06 GHz MPC8640D, 1 GB DDR2 memory, 4GB NAND flash, SCANBE MVME7100-0163 1.06 GHz MPC8640D, 1 GB DDR2 memory, 4GB NAND flash, IEEE MVME7100-0171 1.3 GHz MPC8641D, 2 GB DDR2 memory, 8GB NAND flash, SCANBE MVME7100-0173 1.3 GHz MPC8641D, 2 GB DDR2 memory, 8GB NAND flash, IEEE Related Products XMCSPAN-001 XMC Expansion, IEEE handles XMCSPAN-002 XMC Expansion, SCANBE handles MVME7216E-101 Rear transition module 5 Solution Services Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. PowerPC is a trademark of IBM Corp. and used under license. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power's licensee, licensee's transferees, and licensee's customers and users. Availability of some of the products and services described herein may be restricted in some locations. Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. AC Power Embedded Power Precision Cooling Connectivity Infrastructure Management & Monitoring Racks & Integrated Cabinets DC Power Outside Plant Services Embedded Computing Power Switching & Controls Surge Protection Emerson Network Power Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Madison, WI U.S.A. 1 800 356 9602 or +1 608 831 5500 Shanghai, China +8610 8563 1122 Paris, France +33 1 60 92 31 20 Tokyo, Japan +81 3 5403 2730 Munich, Germany +49 89 9608 2333 Hong Kong, China +852 2176 3540 Tel Aviv, Israel +972 9 9560361 EmersonNetworkPower.com/EmbeddedComputing Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. (c)2008 Emerson Electric Co. MVME7100-D6 11/08