TDP
www.vishay.com Vishay Dale Thin Film
Revision: 08-Jan-13 1Document Number: 60045
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded, Dual-In-Line Thin Film Resistor, Through Hole Network
Vishay Dale Thin Film offers two standard circuits in a
14 pins and 16 pins molded dual-in-line over a 100 to
100 k resistance range. The networks feature ratio
tolerance to 0.05 % with a TCR tracking of 5 ppm/°C.
FEATURES
• Standard rugged, molded case construction
(14 pins and 16 pins)
• Highly stable thin film
(500 ppm at + 70 °C at 2000 h)
• Low temperature coefficient (± 25 ppm/°C)
• Compatible with automatic insertion equipment
• Standard isolated pin one common schematic
• Isolated and bussed schematics
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
*Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
TYPICAL PERFORMANCE
SCHEMATIC
Actual Size
ABSOLUTE TRACKING
TCR 25 5
ABSOLUTE RATIO
TOL. 0.1 0.05
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome -
Pin/Lead Number 14, 16 -
Resistance Range 100 to 100 k-
TCR: Absolute ± 25 ppm/°C - 55 °C to + 125 °C
TCR: Tracking ± 5 ppm/°C - 55 °C to + 125 °C
Tolerance: Absolute ± 0.1 % + 25 °C
Tolerance: Ratio ± 0.05 % to ± 0.5 % + 25 °C
Power Rating: Resistor 0.05 W/resistor = 01 circuit at + 25 °C
0.10 W/resistor = 03 circuit
Power Rating: Package 0.8 W/package Maximum at + 70 °C
Stability: Absolute R ± 0.05 % 2000 h at + 70 °C
Stability: Ratio R ± 0.015 % 2000 h at + 70 °C
Voltage Coefficient < 1 ppm/V (typical) -
Working Voltage 100 V -
Operating Temperature Range - 55 °C to + 125 °C -
Storage Temperature Range - 55 °C to + 150 °C -
Noise < - 30 dB -
Thermal EMF 0.08 μV/°C -
Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C
Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C
Schematic TDP01
Models: TDP1401 and TDP1601
13 or 15 resistors with one pin common
Models: TDP1403 and TDP1603
7 or 8 isolated resistors
TDP-1403
TDP-1603
Pin 1
TDP-1401
TDP-1601
Pin 1
Schematic TDP03
TDP
www.vishay.com Vishay Dale Thin Film
Revision: 08-Jan-13 2Document Number: 60045
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION INCHES MILLIMETERS
A 0.755 19.18
B 0.250 6.35
C 0.075 1.91
D 0.100 2.54
E 0.018 0.46
F 0.060 1.52
G 0.025 0.64
H 0.190 4.83
J 0.130 3.30
K 0.320 8.13
L 0.310 7.87
M 0.010 0.25
A 0.755 19.18
B 0.250 6.35
C 0.025 0.64
D 0.100 2.54
E 0.018 0.46
F 0.060 1.52
G 0.025 0.64
H 0.190 4.83
J 0.130 3.30
K 0.320 8.13
L 0.310 7.87
M 0.010 0.25
A
B
Part
Pin 1
Vishay
Logo
Date Code
TDP14XX
C
D
E
F
G
H
J
M
L
K
A
B
Part
Pin 1
Vishay
Logo
Date Code
TDP16XX
C
D
E
F
G
H
J
M
L
K
TDP
www.vishay.com Vishay Dale Thin Film
Revision: 08-Jan-13 3Document Number: 60045
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MECHANICAL SPECIFICATIONS
Resistive Element Passivated nichrome
Substrate Material Alumina
Body Conformal coated
Terminals Copper alloy
Tin/Lead Option Sn90
Lead (Pb)-free Option 100 % matte tin
Tin/Lead and Lead (Pb)-free Finish Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TDP14031002BUF
GLOBAL MODEL
(3 or 4 digits) PINS SCHEMATICS RESISTANCE TOLERANCE AND
RATIO TOLERANCE PACKAGING
TDP
(Tin lead)
TDPT
(Lead (Pb)-free)
(e3)
14
16
01 = 13 or 15
resistors with
1 common pin
03 = 7 or 8
isolated resistors
First 3 digits are
significant figures
and the last digit
specifies the
number of zeroes
to follow.
Absolute
A = ± 0.1 % (1)
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
Ratio
± 0.05 %
± 0.1 %
± 0.1 %
± 0.1 %
± 0.5 %
UF = Tubed
e.g.: 1001 = 1K
1002 = 10K
Historical Part Number example: TDP14031001F (for reference purposes only)
TDP 14 03 1001 F
SERIES PINS SCHEMATIC RESISTANCE TOLERANCE AND
RATIO TOLERANCE
PT16 3100TD 3AU0 F
P300TD 2BU0 F114
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
