1.27 mm pitch connector IDC type male connector for panel PCS-E( )PM( )-( ) For cable IDC (1.27 mm) Configuration of product Part No. PCS-E ( ) P M ( )- ( ) Series name No. of contacts: 20, 28, 36, 50 or 68 For panel Type of contact: Male Cable sizes for reference purposes (In case the cable insulation is made of PVC resin) Blank: AWG#28(7 / 0.127). AWG#30(1 / 0.245). For flat cables A : AWG#28(7 / 0.127). AWG#30(1 / 0.245). Outside diameter of insulation is 0.8-1.0 mm. For discrete wire. B : AWG#30(7 / 0.1). For flat cables. C : AWG#28(7 / 0.127) flat cable. AWG#30(1 / 0.245). Outside diameter of insulation is 0.5-0.65 mm. For discrete wire. D : AWG#30(7 / 0.1). Outside diameter of wire is 0.5-0.65 mm. For discrete wire. Holes on mounting flange Blank: M2.50.45 H : Diameter of hole: 2.7 mm (The connector is mounted on the Die-cast material vertical backshell of PCS-E( )PML( ).) 15.6 10.5 5.5 5.7 2.45 POS.#1 F D 0.85 1.27 1.27 E D 15 C B 0.85 4-R1 A 3.6 4 For discrete wire For flat cable Holes on mounting flange LAST POS. This figure shows 36-contact connector as a typical example. Dimensions Components Insulator Shell Contacts Spacer Because some combinations of "Configurations of Product Part No.", are under consideration for development, please contact us for availability details. Cable cover Mating connectors: PCS-E series cable-side soldering type female connector PCS-E series cable-side IDC type female connector Accessories: Dust-proof cap, PCS-E( )C( ) Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others Part No. PCS-E20PM( ) A 33.4 B 27.4 C 15.8 D 11.43 E 21.6 F 21.65 PCS-E28PM( ) 38.5 32.5 20.88 16.51 26.7 26.7 PCS-E36PM( ),-H 43.6 37.6 25.96 21.59 31.8 31.8 PCS-E50PM( ) 52.5 46.5 34.85 30.48 40.7 40.7 PCS-E68PM( ) 63.9 57.9 46.28 41.91 52.1 52.1