1
Rectifier Device Data
    
Axial lead mounted fast recovery power rectifiers are designed for special
applications such as dc power supplies, inverters, converters, ultrasonic
systems, choppers, low RF interference and free wheeling diodes. A complete
line of fast recovery rectifiers having typical recovery time of 100 nanoseconds
providing high efficiency at frequencies to 250 kHz.
Mechanical Characteristics
Case: Epoxy, Molded
Weight: 1.1 gram (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal Leads are
Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16 from case
Shipped in plastic bags, 5,000 per bag.
Available Tape and Reeled, 1500 per reel, by adding a “RL” suffix to the
part number
Polarity: Cathode Indicated by Polarity Band
Marking: R850, R851, R852, R854, R856
MAXIMUM RATINGS
Rating Symbol MR850 MR851 MR852 MR854 MR856 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 Volts
Non–Repetitive Peak Reverse Voltage VRSM 75 150 250 450 650 Volts
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 Volts
Average Rectified Forward Current
(Single phase resistive load, TA = 80°C) IO3.0 Amp
Non–Repetitive Peak Surge Current
(surge applied at rated load conditions) IFSM 100
(one cycle) Amp
Operating and Storage Junction
Temperature Range TJ,
Tstg 65 to +125
65 to +150 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Ambient
(Recommended Printed Circuit Board Mounting, See Note 4, Page 5) RθJA 28 °C/W
Preferred devices are Motorola recommended choices for future use and best overall value.
Motorola, Inc. 1996
Order this document
by MR850/D

SEMICONDUCTOR TECHNICAL DATA





FAST RECOVERY
POWER RECTIFIERS
50–600 VOLTS
3.0 AMPERES
CASE 267–03
MR852 and MR856 are
Motorola Preferred Devices
Rev 2
    
2Rectifier Device Data
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
Forward Voltage
(IF = 3.0 Amp, TJ = 25°C) VF 1.04 1.25 Volts
Reverse Current (rated dc voltage) TJ = 25°C
MR850
MR851
MR852
MR854
MR856
TJ = 80°C
IR
2.0
60
100
10
150
150
200
250
300
µA
REVERSE RECOVERY CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
Reverse Recovery Time
(IF = 1.0 Amp to VR = 30 Vdc, Figure 9)
(IF = 15 Amp, di/dt = 10 A/µs, Figure 10)
trr
100
150 200
300
ns
Reverse Recovery Current
(IF = 1.0 Amp to VR = 30 Vdc, Figure 9) IRM(REC) 2.0 Amp
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
STYLE 1:
PIN 1. CATHODE
2. ANODE
1
2
K
A
K
D
B
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.370 0.380 9.40 9.65
B0.190 0.210 4.83 5.33
D0.048 0.052 1.22 1.32
K1.000 ––– 25.40 –––
CASE 267–03
ISSUE C
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Af firmative Action Employer .
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1,
P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488
Mfax: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
INTERNET: http://motorola.com/sps
MR850/D