31
Cal-Chip Electronics, Incorporated
TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
TC SERIES:The TC Series is designed for hybrid circuit
and low profile printed circuit board applications where
inductance is to be minimized, or where substrate space is
at a premium. They can be attached to substrates or circuit
boards by dipsoldering, welding, re-flow soldering or other
conventional methods. These units have the further advan-
tage of being compatible with automatic assembly equip-
ment-minus the problems associated with flexible terminal
lead wires. Our chip tantalums meet all EIA sizes.
RATINGS
Capacitance Range: 0.1µF to 220µF
Tolerance Range: M(±20%), K(±10%)
Rated Voltage: 4V to 50V
ITEMS
Operating Temperature Range
Maximum Working Temperature
Rated Voltage Range
Capacitance Range
Standard Capacitance Tolerance
Dissipation factor (tan δ)
Leakage Current
Temperature
Stability
Surge Voltage
Solder Heat Resistance
Humidity Test
High Temperature Test
Failure Rate at 85°C
SPECIFICATIONS,PERFORMANCE
-55°C~+85°C(+125°C)
+85°C (+125°C with derating)
4 VDC ~ 50 VCD
0.1µF ~ 220µF
±20% (M) ±10%(K)
0.1~1.0µF 4.0%
1.5~100µF 6.0%
Not more than 0.01CV or
0.5µA, whichever is greater
TEST CONDITIONS
See Table of Standard Ratings
JIS-C-5102 20°C 120Hz
JIS-C-5102 20°C 120Hz
JIS-C-5102 20°C (5 minutes)
(after rated voltage applied)
JIS-C-5140 and 5102 85°C
Surge voltage applied, 1000 times with series
resistance of 1000for 30 seconds at intermittent
inter vals of 5 minutes
JIS-C-5102
at 60°C humidity 90% ~ 95% RH,
500 Hours
JIS-C-5102
85°C, Rated voltage 2000 hours or 125°C
Derating voltage 1000 hours with circuit
resistance of 1/V
MTBF 5 X 104Hr.
Temp.
-55°C
+125°C
C
Max
±12%
Max.
±15%
Max.tan δ
0.1 ~ 1.0µF 6.0%
1.5 ~ 100µF 8.0%
0.1 ~ 1.0µF 6.0%
1.5 ~ 100µF 8.0%
Max.Leakage Current
NA
0.125CV or 6.25µA
whichever is greater
Procedure:
1.20±2°C
2.-55+0 °C Stabilized
-3
3.20±2°C 15 min.
4.+125+3 °C 2 hrs.
-0
Capacitance Change
Dissipation Factor
Leakage Current
Less than ±5%
Less than
specified value
Capacitance Change
Dissipation Factor
Leakage Current
Less than ±5%
Less than initial
specified value
Capacitance Change
Dissipation Factor
Leakage Current
Less than ±10%
Less than initial
specified value
Withstand solder immersion 5 seconds at
260°C or reflow 10 seconds at 260°C
1% per 1,000 hours
TC SERIES
32
Capacitance Tolerance
Code
±20%
M
±10%
K
Cal-Chip Electronics, Incorporated
TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
Ordering Information & Marking
Ordering Information Example: 1 MFD 16 volt 20%
TC M IC 105 A T
Series Destination
Capacitance Tolerance
Rated Voltage
Capacitance
Size
Taping & Packaging
Capacitance (ex)
Code
Rated Voltage
Code
2
OD
4
OG
6.3
OJ
10
IA
16
IC
20
ID
25
IE
35
IV
50
IX
0.1 ~ 0.68µF
104 ~ 684
1.0 ~ 6.8µF
105 ~ 685
10 ~ 470µF
106 ~ 477
R: Decimal Point - First two digits represent significant figures and the third digit specifies number of zeros
to follow. Capacitance unit is µF.
MARKING
A - Size
Capacitance: First two digits represent capacitance and the third digit speci-
fies number of zeros to follow.
Capacitance unit is µF.
B, C, D - Size
FREQUENCY CHARACTERISTIC CURVES
(TC SERIES)
ex) 6.3V-2.2µF
ex) 10V-22µF
TC SERIES
Note: See back cover for low ESR information
33
Rated Voltage @ +85°C
Surge Voltage @ +85°C
Derated Voltage @ 125°C
Derated Surge Voltage @ +125°C
Capacitance µF
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
Cal-Chip Electronics, Incorporated
TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
4
5.2
2.7
3.4
STD/EXT
A
A
B/A
C/B
C/B
D/C
D/
D/
E
6.3
8
4
5
STD/EXT
A
A
/A
B/A
A/C/B
A/C/B
B/C
D/C/B
D/
D/C
D/E
D/E
10
13
7
9
STD/EXT
A
A
/A
B/A
C/B/A
D/C/B
D/C
/D
E/D
D/E
D/E
16
20
10
12
STD/EXT
A
A
B/A
B/A
C/B
C/B
C/B
D/C/B
D/C/B
/D
E/D
E/D
20
26
13
16
STD/EXT
A
A
/A
B/A
C/B
C/B
D/C/B
D/C
D/C
/D
D/E
/E
25
32
17
22
STD/EXT
A
A
B/A
C/B
C/B
D/C
D/C
E
35
46
23
28
STD/EXT
A
A
A
A
B/A
B/A
B/A
C/B
C/B
C
D/C
D/
D
D/E
/E
50
65
33
40
STD/EXT
A
B/A
B
B
C/B
C
C
/C
D/C
D/
D
D/E
*Letter code after / indicates new extended range. Please indicate size code on ordering.
NOTES
1. Be sure polarity. Positive (+) side has white belt.
2. For cleaning, freon®TE, TES and TMS are recommended at a temperature less than 50°C for a period less than 5 minutes.
3. When ultrasonic cleaning is necessary, fixing capacitor body by epoxy adhesive before soldering is recommended.
Establish adequate cleaning conditions by experiment to avoid damaging capacitor terminations.
4. Limit reverse voltage to 1.0V or less than 5% of rated voltage whichever is smaller.
5. In case of low impedance circuit use (Less than 3 /V), adequate voltage derating is recommended to improve M.T.B.F.
6. In case of automatic mounting, the tweezer pressure shall be less than 500 grams and should not exceed 5 seconds.
STANDARD RATINGS AND CASE SIZE DISTRIBUTION*
TC SERIES
A
A
B/A
C/B
A
B/A
D/C/B
B/A
A
A
A
C/B/A
D/C/B
A
C/B
A
B/A
C/B
D/C
D/C
E/D
34
4.0 6.3 10 16 20 25 35 50
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
A 9.0
A 7.5
A 6.5
A 6.0
B 4.0
B 3.5
B 3.2
C 2.5
B 2.4
C 2.2
C 1.8
C 1.6
D 1.1
D 0.9
D 0.7
E 0.6
A 9.0
A 7.5
A 6.5
A 6.0
B 4.0
B 3.5
B 3.2
C 2.5
B 2.4
C 2.2
B 2.0
C 1.8
C 1.6
D 1.1
D 0.9
D 0.8
D 0.6
E 0.6
D 0.7
A 10.0
A 7.5
A 6.5
A 6.0
B 4.0
B 3.5
B 3.2
C 2.5
B 2.4
C 2.2
B 2.5
C 1.8
C 1.6
D 1.1
C 1.6
D 0.9
D 0.8
D 0.7
E 0.7
D 0.8
E 0.6
D0.9
A 11.0
A 8.0
A 7.0
B 5.5
A 6.2
B 4.4
B 3.6
B 3.3
C 2.6
B 2.4
C 2.2
C 1.8
C 1.2
D 0.9
D 0.8
D 0.7
E 0.8
D 0.7
E 0.7
A 12.0
A 10.0
A 7.5
B 5.0
B 3.8
B 3.5
C 2.8
C 2.4
C 2.0
D 1.3
C 1.7
D 1.1
C 1.5
D 0.9
D 0.8
D 0.7
E 0.9
E 0.6
A 14.0
A 10.0
A 9.0
B 7.0
B 5.5
B 4.5
B 3.6
C 2.8
C 2.4
C 2.0
D 1.4
C 1.8
D 1.2
D 1.0
D 0.8
E 0.7
E 0.9
A 24.0
A 21.0
A 18.0
A 15.0
A 12.0
B 10.0
A 9.0
B 8.0
B 6.5
B 5.2
C 4.5
C 3.5
C 2.5
C 2.2
D 1.5
D 1.3
D 1.0
E 0.8
E 0.7
A 22.0
A 20.0
B 17.0
B 14.0
B 12.0
B 10.0
C 8.0
C 7.5
C 5.5
C 4.0
C 3.5
D 2.5
D 2.0
D 1.4
E 1.2
Cal-Chip Electronics, Incorporated
TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
MAX ESR () @ 100kHz, +25°C / BY VALUE AND CASE SIZE
VW (VC)
CAP (µF) 4.0 6.3 10 16 20 25 35 50
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
A0.088
A0.097
A0.104
A0.108
B0.141
B0.151
B0.158
C0.210
B0.183
C0.224
C0.247
C0.262
D0.369
D0.408
D0.463
E0.524
A0.088
A0.097
A0.104
A0.108
B0.141
B0.151
B0.158
C0.210
B0.183
C0.224
BO.208
C0.247
C0.262
D0.369
D0.408
D0.8
DO.486
E0.524
E0.524
A0.084
A0.097
A0.104
A0.108
B0.141
B0.151
B0.158
C0.210
B0.183
C0.224
BO.208
C0.247
C0.262
D0.369
CO.277
D0.408
D0.433
D0.462
E0.486
DO.524
E0.524
E0.524
A0.080
A0.094
B0.100
B0.121
A0.106
B0.135
B0.149
B0.156
C 0.206
B 0.183
C 0.224
C0.247
CO.277
D0.408
D0.433
D0.463
E0.454
DO.463
E0.486
A0.076
A0.084
A0.097
B0.126
B0.145
B0.151
C0.198
C0.214
C0.235
D0.340
C0.254
D0.369
CO.277
D0.408
D0.433
D0.486
EO.454
E0.486
A0.071
A0.084
A0.088
B0.107
B0.121
B0.133
B0.149
C0.198
C0.214
C0.235
D0.327
C 0.247
D0.354
D0.387
D0.433
E0.486
EO.524
A0.054
A0.058
A0.062
A 0.068
A0.076
B0.089
A0.088
B0.100
B0.111
B0.124
C0.156
C0.177
C0.210
C0.224
D 0.316
D0.340
D0.387
E0.454
E0.486
A0.056
A0.059
B0.069
B0.076
B0.076
B0.082
B0.089
C0.117
C0.121
C0.141
C0.166
C0.177
D0.249
D0.274
D0.327
E0.371
MAX RIPPLE CURRENT (Arms) @ 100kHz, +25°C / BY VALUE AND CASE SIZE
VW (VC)
CAP (µF)
EIA
Case Code
A(3216)
B(3528)
C(6032)
D(7343
E(7343H)
L
±0.2
3.2
3.5
6.0
7.3
7.3
W
±0.2
1.6
2.8
3.2
4.3
4.3
H
±0.2
1.7
1.9
2.5
2.9
4.0
P
±0.3
0.8
0.8
1.3
1.3
1.3
a
±0.2
1.2
2.2
2.2
2.4
2.4
h(min)
0.7
0.7
1.0
1.0
1.0
Dimensions in mm
TC SERIES
E 0.6 E 0.6 D0.486 D0.524
B 2.3
C 1.6
D 1.1
B0.35
C0.262
D0.369
35
Cal-Chip Electronics, Incorporated
TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
CHARACTERISTIC DATA & CURVES
LOAD LIFE CHARACTERISTIC CURVES (TC SERIES)
TEMPERATURE CHARACTERISTIC CURVES (TC SERIES)
Frequency Dependence of the
Permissible Superimposed
AC Voltage
Effect of Circuit Impedance
on the Failure Rate
Effect of the Applied Voltage
and Ambient Temperature on
the Failure Rate
Immersion Method
Reflow Method
TC SERIES
36
Cal-Chip Electronics, Incorporated
TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
TAPING SPECIFICATIONS
Dimensions in mm
Embossed Plastic Tape per EIA-481-1
EIA
SIZE
3216
3528
6032
7343
7343H
CASE
CODE
A
B
C
D
E
Ao±0.2
1.9
3.1
3.9
4.7
4.7
Bo±0.2
3.9
3.9
6.3
7.7
7.7
W
8.0±.30
8.0±.30
12.0±.30
12.0±.30
12.0±.30
F
3.5±.05
3.5±0.5
5.5±.05
5.5±.05
5.5±.05
P
4.0
4.0
8.0
8.0
8.0
D1
1.0
1.0
1.5
1.5
1.5
B1
4.2
4.2
8.2
8.2
8.2
KMAX
2.4
2.4
4.5
4.5
4.5
TAPE
SIZE
8mm
8mm
12mm
12mm
12mm
7”REEL
2000
2000
500
500
500
13”REEL
9000
8000
3000
2500
2500
QUANTITY PER REEL
STANDARD ORIENTATION
Standard reel diameter is 7” and 13” reels
are available on special order with (13)
added to the end of the part number.
Cover tape peel-off specification
1. Peel-off speed: 300 mm/min.
2. Peel-off force: F = 30 - 75g
3. Peel-off angle: Θ= 0 - 15°
TC SERIES