ISD2360
Voice/Audio Digital ChipCorder® featuring Multi Channel Mixing
delivers highly integrated single chip solution ideal for wide range of
voice/audio applications in industrial and consumer markets
The ISD2360 is a 3-channel digital ChipCorder providing single-chip storage and playback of high quality audio. The
device features digital de-compression, comprehensive memory management, flash storage, integrated audio
signal path with up to 3 channel concurrent playback and Class D speaker driver capable of delivering power of
0.95W. This family utilizes flash memory to provide non-volatile audio playback with duration up to 64 seconds
(based on 8 kHz/4bit ADPCM compression) for a single-chip audio playback solution.
The ISD2360 can be controlled and programmed through an SPI serial interface or operated stand-alone by triggers
applied to the device’s six GPIO pins.
The ISD2360 requires no external clock sources or components except a speaker to deliver quality audio prompts
or sound effects to enhance user interfaces.
In addition the part can provide non-volatile flash storage in 1Kbyte sectors eliminating the need for additional
serial EEPROM/Flash devices.
Compared to previous ChipCorder series, this device provides higher sampling frequencies, improved SNR, lower
power, fast programming time and integrated program verification.
FEATURES
New features
Multi-channel: 3-channel mixing playback
GPIO parallel processing: Support dynamic
change on GPIO output while the chip is in
playback
EMI, EFT, ESD improvement
0.95W power at 5V
Duration
ISD2360 – 64 seconds based on 8kHz/4bit
ADPCM in 2Mbit of flash storage (256KB)
Audio Management
Store pre-recorded audio (Voice Prompts)
using high quality digital compression
Use simple index based command for
playback – no address needed.
Execute pre-programmed macro scripts
(Voice Macros) designed to control the
configuration of the device and playback Voice
Prompts sequences.
Path and playback Control
Up to 3 channel audio streaming can be
mixed and played back concurrently
Each channel has independent counter
which enables user micro-management on VM
execution
Mask Jump allows branch execution
depending on internal register or external GPIO
pin status
Control
Serial SPI interface for
microprocessor control and programming.
Stand-alone control where
customized Voice Macro scripts are assigned to
GPIO trigger pins.
Sample Rate
7 sampling frequencies 4, 5.3, 6.4, 8, 12.8,
16 and 32 kHz are available.
Each Voice Prompt can have optimal sample
rate.
Compression Algorithms
µ-Law: 6, 7 or 8 bits per sample
Differential µ-Law: 6, 7 or 8 bits per sample
PCM: 8, 10 or 12 bits per sample
Enhanced ADPCM: 2, 3, 4 or 5 bits per
sample
Variable-bit-rate optimized compression.
This allows best possible compression given a
metric of SNR and background noise levels.