Key Features
IHigh precision -
TCR 5ppm/°C and
10ppm/°C
ITolerance down to 0.01%
IThin film (nichrome)
IChoice of packages
IStable high frequency
performance
ITemperature range
-55°C to +155°C
Applications
ICommunications
IInstrumentation
IIndustrial controls
IMedical
Characteristics - Electrical
The RN73 series is a high stability precision chip resistor range offering various power
dissipations relating to chip size, TCR's down to 5ppm/°C and resistance tolerances to
0.01%. The resistor is produced with three sputtered layers giving optimum performance.
Values are restricted to the E96 and E24 value grids. The RN73 has accurate and uniform
physical dimensions to facilitate placement.
0402 0603 0805
Rated Power @ 70°C: 0.063W 0.063W 0.1W
Resistance Range (Ohms) Min: 49R9 49R9 49R9 49R9 49R9 49R9 24R9 24R9 24R9 4R7 24R9 4R7 24R9 24R9 24R9 4R3 24R9 4R3
Max: 5K0 15K 5K0 15K 5K0 15K 15K 100K 15K 332K 15K 332K 30K 200K 30K 511K 30K 511K
Tolerance (%): 0.01 0.05 0.1 0.01 0.05 0.1 0.01 0.05 0.1
Code Letter: LAB L A B LA B
Selection Series: E24 & E96 E24 & E96 E24 & E96
Temp. Coefficient (ppm/°C): 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10
Code Letter: ACACACAC ACACACAC AC
Limiting Element Voltage: 25V 50V 100V
Max. Overload Voltage: 50V 100V 200V
Operating Temp. Range: -55 to +155°C -55 to +155°C -55 to +155°C
Climatic Category (°C): 55/125/55 55/125/55 55/125/55
Insulation Resistance Dry Min: 1000MΩ 1000MΩ 1000MΩ
Stability: 0.5% 0.5% 0.5%
1206 1210 2010
Rated Power @ 70°C: 0.125W 0.2W 0.25W
Resistance Range (Ohms) Min: 24R9 24R9 24R9 4R7 24R9 4R7 24R9 24R9 24R9 4R7 24R9 4R7 24R9 24R9 24R9 4R7 24R9 4R7
Max: 50K 562K 50K 1M0 50K 1M0 50K 500K 50K 1M0 50K 1M0 100K 500K 100K 1M0 100K 1M0
Tolerance (%): 0.01 0.05 0.1 0.01 0.05 0.1 0.01 0.05 0.1
Code Letter: LAB L A B LA B
Selection Series: E24 & E96 E24 & E96 E24 & E96
Temp. Coefficient (ppm/°C): 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10
Code Letter: ACACACAC ACACACAC AC
Limiting Element Voltage: 150V 150V 150V
Max. Overload Voltage: 300V 300V 300V
Operating Temp. Range: -55 to +155°C -55 to +155°C -55 to +155°C
Climatic Category (°C): 55/125/55 55/125/55 55/125/55
Insulation Resistance Dry Min: 1000MΩ 1000MΩ 1000MΩ
Stability: 0.5% 0.5% 0.5%
SMD High Power Precision Resistors
Type RN73 Series
1773270 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
-55 -40 -20 0 20 40 60 70 80 100 120 140 155
100
80
60
40
20
0
Rated Load (%)
Ambient Temperature (°C)
For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve.
Power Derating Curve
Characteristics - Environmental
Requirement Test Method
Tol. ≤ 0.05% Tol. > 0.05%
Temperature Coefficient As per TCRs specified in value range table on page 1 +25/-55/+25/+125/+25°C
of Resistance (TCR):
Short Time Overload: ΔR ±0.05% ΔR ±0.2% RCWV* 2.5 or max. overload
ΔR ±0.2% for high power rating voltage for 5 seconds
Insulation Resistance: >1000MΩ Apply 100VDC for 1 minute
ΔR ±0.05% ΔR ±0.2% 70 ±2°C, max. working voltage
Endurance: >7kΩ ΔR ±0.5% for 1000hrs with 1.5hrs
ΔR ±0.5% for high power rating “ON” and 0.5hrs “OFF”
Damp Heat with Load: ΔR ±0.05% ΔR ±0.3% 40 ±2°C, 90 - 95% R.H. max. working voltage
ΔR ±0.5% for high power rating hrs with 1.5hrs “ON” and 0.5hrs “OFF”
Bending Strength: ΔR ±0.05% ΔR ±0.2% Bending amplitude 3mm for 10 seconds
Solderability: 95% min. coverage 245 ±5°C for 3 seconds
Resistance to Soldering Heat: ΔR ±0.05% ΔR ±0.2% 260 ±5°C for 10 seconds
Dielectric Withstand Voltage: By type Max. overload voltage for 1 minute
Thermal Shock: ΔR ±0.05% ΔR ±0.25% -55°C to +150°C, 100 cycles
Low Temperature Operation: ΔR ±0.05% ΔR ±0.2% 1 hour, -65°C, followed by 45 minutes of RCWV
ΔR ±0.5% for high power rating
Reference Standards: MIL-STD-202, JIS-C 5201-1
Storage Temperature: 25±3°C; Humidity < 80%RH
2512
Rated Power @ 70°C: 0.5W
Resistance Range (Ohms) Min: 24R9 24R9 24R9 4R7 24R9 4R7
Max: 100K 500K 100K 1M0 100K 1M0
Tolerance (%): 0.01 0.05 0.1
Code Letter: LAB
Selection Series: E24 & E96
Temp. Coefficient (ppm/°C): 510 5 10 5 10
Code Letter: AC A C A C
Limiting Element Voltage: 150V
Max. Overload Voltage: 300V
Operating Temp. Range: -55 to +155°C
Climatic Category (°C): 55/125/55
Insulation Resistance Dry Min: 1000MΩ
Stability: 0.5%
SMD High Power Precision Resistors
Type RN73 Series
1773270 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Case Sizes 0603
E24 10 11 12 13 15 16 18 20 22 24 27 30
33 36 39 43 47 51 56 62 68 75 82 91
E24 3 Digit Marking - Example: 101=100Ω102=1KΩ
Code E96 Code E96 Code E96 Code E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48 309 72 549 96 976
Code A B C D E F G H X Y Z
Multiplier 10010110210310410510610710-1 10-2 10-3
0603 E96 Marking Code Table
E96 3 Digit Marking - Examples: 14C=13K7Ω, 13C=13K3Ω, 68B=4K99Ω, 68X=49.9Ω
Dimensions
Part Number L W H D d Weight (g) 1000 pieces
RN73 1E (0402) 1.00+/-0.05 0.50+/-0.05 0.30+/-0.05 0.20+/-0.10 0.20+/-0.10 0.54
RN73 1J (0603) 1.55+/-0.10 0.80+/-0.10 0.45+/-0.10 0.30+/-0.20 0.30+/-0.20 1.83
RN73 2A (0805) 2.00+/-0.15 1.25+/-0.15 0.55+/-0.10 0.30+/-0.20 0.40+/-0.25 4.71
RN73 2B (1206) 3.05+/-0.15 1.55+/-0.15 0.55+/-0.10 0.42+/-0.20 0.35+/-0.25 9.02
RN73 2E (1210) 3.10+/-0.15 2.40+/-0.15 0.55+/-0.10 0.40+/-0.20 0.55+/-0.25 10
RN73 2H (2010) 4.90+/-0.15 2.40+/-0.15 0.55+/-0.10 0.60+/-0.30 0.50+/-0.25 23.61
RN73 3A (2512) 6.30+/-0.15 3.10+/-0.15 0.55+/-0.10 0.60+/-0.30 0.50+/-0.25 38.08
Marking Codes - Case Sizes 0805 to 2512
Resistance: 100Ω 2.2KΩ 10KΩ 49.9KΩ 100KΩ
Marking Code: 1000 2201 1002 4992 1003
IEC 4 Digit Marking
L
D
W
H
d
SMD High Power Precision Resistors
Type RN73 Series
1773270 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
14C
Recommend Land Pattern
Type A B C
RN73 1E (0402) 0.5 0.5 0.60 ±0.2
RN73 1J (0603) 0.8 1.0 0.90 ±0.2
RN73 2A (0805) 1.0 1.0 1.35 ±0.2
RN73 2B (1206) 2.0 1.15 1.70 ±0.2
RN73 2E (1210) 2.0 1.15 2.50 ±0.2
RN73 2H (2010) 3.6 1.4 2.50 ±0.2
RN73 3A (2512) 4.9 1.6 3.10 ±0.2
Packaging Quantity & Reel Specifications
Type øA øB øC W T Paper Embossed
Tape (EA) Plastic Tape (EA)
RN73 1E (0402) 178.0 ±1.0 60.0 +1.0 13.5 ± 0.7 9.5 ±1.0 11.5 ±1.0 *250 / 1000 / 5000 -
RN73 1J (0603) 178.0 ±1.0 60.0 +1.0 13.5 ± 0.7 9.5 ±1.0 11.5 ±1.0 *250 / 1000 / 5000 -
RN73 2A (0805) 178.0 ±1.0 60.0 +1.0 13.5 ± 0.7 9.5 ±1.0 11.5 ±1.0 *250 / 1000 / 5000 -
RN73 2B (1206) 178.0 ±1.0 60.0 +1.0 13.5 ± 0.7 9.5 ±1.0 11.5 ±1.0 *250 / 1000 / 5000 -
RN73 2E (1210) 178.0 ±1.0 60.0 +1.0 13.5 ± 0.7 9.5 ±1.0 11.5 ±1.0 *250 / 1000 / 5000 -
RN73 2H (2010) 178.0 ±1.0 60.0 +1.0 13.5 ± 0.7 13.5 ±1.0 15.5 ±1.0 - 4000
RN73 3A (2512) 178.0 ±1.0 60.0 +1.0 13.5 ± 0.7 13.5 ±1.0 15.5 ±1.0 - 4000
* 250 piece packs supplied in sealed bags of cut tape length
SMD High Power Precision Resistors
Type RN73 Series
1773270 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
RN73 C 2A 100K B TDF
Common Part
RN73 - High
precision resistors
(RoHS compliant)
Temp. Coefficient
A - ±5ppm/°C
* C - ±10ppm/°C
Package Size
1E - 0402
* 1J - 0603
* 2A - 0805
2B - 1206
2E - 1210
2H - 2010
3A - 2512
* Preferred stock item* Preferred stock item
Resistor Value
100R
(100 ohms)
1K0
(1000 ohms)
100K
(100,000 ohms)
Tolerance
A - ±0.05%
*B - ±0.1%
L - ±0.01%
Packaging
TG - 250 Cut tape
length (1E, 1J, 2A, 2B)
TDF -1000 REEL
(1E, 1J, 2A, 2B)
TD - 5000 REEL
(1E, 1J, 2A, 2B, 2E)
TDG - 250 REEL
(1E, 1J, 2A only)
TE - 4000 REEL
(2H, 3A only)
How to Order
Paper Tape Specification
Type A B W E F P0P1P2øD0T
RN73 1E (0402) 0.70 ±0.05 1.16 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 2.00 ±0.05 2.00 ±0.05 1.55 ±0.05 0.40 ±0.03
RN73 1J (0603) 1.10 ±0.05 1.90 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.60 ±0.03
RN73 2A (0805) 1.60 ±0.05 2.37 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.75 ±0.05
RN73 2B (1206) 2.00 ±0.05 3.55 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.75 ±0.05
RN73 2E (1210) 2.75 ±0.05 3.40 ±0.05 8.00 ±0.10 1.75 ±0.05 3.5 ±0.05 4.00 ±0.05 4.00 ±0.10 2.00 ±0.05 1.60 ±0.10 0.75 ±0.05
Embossed Plastic Tape Specifications
Type A B W E F P0P1P2øD0T
RN73 2H (2010) 2.85 ±0.10 5.45 ±0.10 12.0 ±0.10 1.75 ±0.10 5.5 ±0.05 4.00 ±0.05 4.00 ±0.10 2.00 ±0.05 1.50 +0.10 1.00 ±0.20
RN73 3A (2512) 3.40 ±0.10 6.65 ±0.10 12.0 ±0.10 1.75 ±0.10 5.5 ±0.05 4.00 ±0.05 4.00 ±0.10 2.00 ±0.05 1.50 +0.10 1.00 ±0.20
* Preferred stock item
SMD High Power Precision Resistors
Type RN73 Series
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.