http://www.tracopower.com Page 1 of 3
Industrial Power Supplies
TBL Series, 15 to 150 Watt
Features
◆ Low profile case, module depth only 55mm
◆ Fits into flat control panels used in
building automation
◆ Safety class ll product
◆ UL 1310 class II, NEC class 2 compliance
(models up to 90 W)
◆ UL 508 listed
◆ 5 power ranges from 15 to 150 W
◆ Universal input range 85 to 264 VAC
◆ Operating temperature range:
–25°C to +70°C max.
◆ Adjustable output voltage
◆ Short circuit and overload protection
◆ DC–OK indicator
◆ Easy snap-on mounting on DIN-rail
or with wall mounting bracket (included)
◆ 3-year product warranty
The TBL series is a new range of small DIN-rail mount power supplies which have
been designed particularly with building- and factory automation applications in
mind. The ultra-compact low profile cases fit in the standardized wall mounted con-
trol panels used in the building automation industry. The power supplies can be
operated at full load across an ambient temperature range of –25°C to +60°C with-
out need of additional cooling. Universal input voltage range and full compliance
with all important safety and EMC standards qualifies the TBL series power sup-
plies for worldwide markets. For commercial and residential applications requesting
safety class ll the models up to 90 Watt are approved to UL 1310.
Order Code Output Power
(max.)
Output Voltage*
(nom.)
Output Current
(max.)
Efficiency
(typ.)
TBL 015-105 12 W 5.0 VDC 2.4 A 73 %
TBL 015-112 15 W 12 VDC 1.25 A 79 %
TBL 015-124 15 W 24 VDC 0.63 A 81 %
TBL 030-112 12 VDC 2.5 A 81 %
TBL 030-124 30 W 24 VDC 1.25 A 83 %
TBL 060-112 54 W 12 VDC 4.5 A 83 %
TBL 060-124 60 W 24 VDC 2.5 A 85 %
TBL 090-112 72 W 12 VDC 6.0 A 86 %
TBL 090-124 90 W 24 VDC 3.75 A 86 %
TBL 150-112 120 W 12 VDC 10 A 84 %
TBL 150-124 150 W 24 VDC 6.25 A 87 %
Models
* adjustable
UL508
CB
Scheme
UL60950-1UL1310
http://www.tracopower.com Page 2 of 3
Industrial Power Supplies
TBL Series 15 to 150 Watt
Input Specifications
Input voltage – AC nominal rated 100 – 240 VAC; 50/60 Hz
TBL 150 models: 100 – 120 / 220 – 240 VAC; 50/60 Hz
– AC range (designed for) 85 – 264 VAC; 47 – 63 Hz
TBL 150 models: 85 – 132 / 187 – 264 VAC; 47 – 63 Hz
– DC range (designed for) 120 – 373 VDC (except TLB 150 models)
– Power derating at low input voltage 5% below 90 VAC or 127 VDC
Harmonic limits EN 61000-3-2, Class A
Recommended circuit breaker (characteristic C or slow blow fuse) 6.0 A
Output Specifications
Output voltage adjustable range 5 VDC model: 5.0 – 5.2 VDC
12 VDC models: 12 – 16 VDC
24 VDC models: 24 – 28 VDC
Output regulation 1 %
Ripple and noise (20MHz bandwidth) <100 mV pk-pk
Electronic short circuit protection current limitation at 100 – 150 % typ.
(automatic recovery)
Overvoltage protection, trigger point 5 VDC model: 5.5 – 7.5 VDC
12 VDC models: 16 – 24 VDC
TBL 030-124, TBL 150-124: 30 – 37 VDC
TBL 015-124, TBL 060-124, TBL 090-124: 29 – 44 VDC
Hold-up time 115 VAC 230 VAC
min. 10 ms min. 20 ms
General Specifications
Temperature ranges – Operating –25°C to +70°C max.
– Storage –40°C to +85°C max.
Power derating 2.5 %/K above 60°C
Humidity (non condensing) 5 – 95 % rel. H
Temperature coefficient 0.02 %/K
Reliability, calculated MTBF at +25°C acc. to IEC 61709 TBL 015: >1,500 Mio h
TBL 060: >2,100 Mio h
all other models: >1,300 Mio h
Safety standards UL 508 listed
UL 1310, class II (15 – 90 W models)
IEC 60950-1 2nd, EN 60950-1:2006+
Am1:2010 +Am11:2009 +Am12:2011
EN 50178, EN 60204-1, EN 61558-2-16
CAN/CSA-C22.2 No. 60950-1-07
UL 60950-1 2nd
Safety approvals – CB report IEC 60950-1 www.tracopower.com/products/tbl-cb.pdf
– UL certification UL 508 listed (File e181381) www.tracopower.com/products/tbl-ul508.pdf
– UL certification UL 1310 (File e181381) www.tracopower.com/products/tbl-ul1310.pdf
– CSA certification UL/CSA 60950 -1 www.tracopower.com/products/tbl-csa.pdf
– SIQ-BG certificate EN 60950-1 ++ www.tracopower.com/products/tbl-siq.pdf
Electromagnetic compatibility (EMC), emissions EN 61000-6-3
– Conducted RI suppression on input EN 55022 class B
– Radiated RI suppression EN 55022 class B
Electromagnetic compatibility (EMC), immunity EN 61000-6-2
– Electrostatic discharge (ESD) EN 61000-4-2 4 kV / 8 kV
– Radiated RF field immunity EN 61000-4-3 3 V/m
– Electrical fast transient / burst immunity EN 61000-4-4 1 kV / 0.5 kV
– Surge immunity line – ground EN 61000-4-5 2 kV
– Surge immunity line – line EN 61000-4-5 1 kV
– Surge immunity output EN 61000-4-5 0.5 kV
– Immunity to conducted RF disturbances EN 61000-4-6 3 V
– Mains voltage dips and interruptions EN 61000-4-11 30 % /10 mS, 60 % /100 mS
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Page 3 of 3
Industrial Power Supplies
TBL Series 15 to 150 Watt
Rev. April 04. 2014
Case Dimensions
Dimensions in [mm], () = Inch
Tolerances: ±0.5 mm (±0.02)
General Specifications
Protection class class II as per IEC/EN 61140
Case protection IP 20 (IEC 60529)
Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10 – 55 Hz, 0.075 mm
– Shock acc. IEC 60068-2-27 3 axis, 15 g half sine, 11 ms
Enclosure material plastic FR2010-110C (UL 94V-0 rated)
Mounting DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring or wall mounting
with bracket) (included)
Connection screw terminals with combi-type screw heads
for wire size 0.5 – 1.5 mm²
Installation instructions www.tracopower.com/products/tbl-inst.pdf
Environmental compliance – Reach www.tracopower.com/products/tbl-reach.pdf
– RoHS RoHS directive 2011/65/EU
Vadj
59.5 (2.34)
37.1 (1.46)
21.1 (0.83)
69.5 (2.74)
45.0 (1.77)
89.5 (3.52)
54.5 (2.15) W
Description Wire size
AC Input all models: L, N only (2 pin terminal) AWG 26 – 16 / 1.5 mm² max.
DC Output 15 – 30 W models: single terminal AWG 26 – 14 / 1.5 mm² max.
DC Output 60 – 150 W models: double terminal AWG 26 – 14 / 1.5 mm² max.
Wiring
Model Width (W)
mm (inch)
Weigth
g (oz)
TBL 015 26.3 (1.04) 100 (3.53)
TBL 030 52.5 (2.07) 160 (5.64)
TBL 060 70.0 (2.76 230 (8.11)
TBL 090 105.0 (4.13) 340 (12.0)
TBL 150 175 (6.89) 625 (22.0)
Wall Mounting Bracket
Instead on a DIN-rail, the modules can be also mounted on a chassis or wall with help
of a mounting bracket which is supplied as standard with each power supply
