Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Document Number 5353
Issue 1
2N6315
2N6317
ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated)
Collector – Emitter Sustaining
Voltage *
Collector Cut–off Current
Collector Cut–off Current
Collector Cut–off Current
Emitter Cut–off Current
DC Current Gain
Collector – Emitter Saturation
Voltage
Base – Emitter Saturation Voltage
Base – Emitter On Voltage
Output Capacitance
Current Gain – Bandwidth Product
Small Signal Current Gain
Rise Time
Storage Time
Fall Time
60
0.5
0.25
2.0
0.25
1.0
35
20 100
41.0
2.0
2.5
1.5
300
4.0
20
0.7
1.0
0.8
V
mA
—
V
pF
MHz
—
µS
VCEO(sus)
ICEO
ICEX
ICBO
IEBO
hFE
VCE(sat)
VBE(sat)
VBE(on)
Cob
fT
hfe
tr
ts
tf
Notes
DYNAMIC CHARACTERISTICS
ON CHARACTERISTICS *
OFF CHARACTERISTICS
Parameter Test Conditions Min. Typ. Max. Unit
*Pulse test: tp= 300µs , Duty Cycle = 2%
IC= 100mA IB= 0
VCE = 30V IB= 0
VCE = 60V VBE(off) = 1.5V
TC= 150°C
VCB = 60V IE= 0
VEB = 5V IC= 0
VCE = 4V IC= 0.5A
VCE = 4V IC= 2.5A
VCE = 4V IC= 7.0A
IC= 4A IB= 0.4A
IC= 7A IB= 1.75A
IC= 7A IB= 1.75A
VCE = 4V IC= 2.5A
VCB = 10V IE= 0
f = 1MHz
VCE = 10V
IC= 0.25A
f = 1MHz
VCE = 4V IC= 0.5A
f = 1kHz
VCC = 30V
IC= 2.5A
IB1 = IB=0.25A
DYNAMIC CHARACTERISTICS