Spade Tongue @ old Terminals 1-800-800-0449 [c Spade Tongue Terminals 26 to 10 Wire Range | L MATERIAL: COPPER KRIMPTITE INSULKRIMP VERSAKRIMP AVIKRIMP {PVC INSULATION) (NYLON INSULATION) Stud Max. Min. Max. Max. Max. Max. . Wire Size Width Clearance Part Length Part Length Part Length Part Length Range S W c Number L Number L Number L Number L 26-24 0 (1,5) 135 (3,4) 121 (3,1) - 362 (9,2) M-8123-00 532 (13,5} 12-0.2mme | 92 (2) 192 (4,9) 215 (5,5) M-1116-02 AG (12,6) M-8116-02 666 (16,9) 4 (2.6) 213 (5,4) 215 (5,5) M-1121-04 A8? (12,4) M-8121-04 657 (16,7) 22-18 5-6 (3-3,5) | 326 (8,3) 303 (7,7) AA+135-06 890 (17,5) AA-235-06X 915 (23,2) AA-335-06 690 (17,5) AA-835-06 915 (23,2) 03-4.0mme |g (4) 326 (8.3) 303 (7,7) AA-135-08 690 (17,5) AA-235-08X 915 (23,2) AA-335-08 690 (17,5) AA-835-08 915 (23,2) 10 (+ 326 (8.3) 303 (7,7) AA-135-10 690 (17,5) AA-235-10X 915 (23,2) _ 690 (17,5) AA-835-10 915 (23,2) 16-14 3-4 (2,6) 255 (65) 209 (6,3) = 565 (14,4) BB-207-04X 790 (20,1) 565 (14,4) - .805 (20,5) 122.0mm: 1 5.6 (3-35) | 255 (6.5) 209 (5,3) BB-107-06 565 (14,4) BB-207-06X 790 (20,1) _ 565 (14,4) BB-807-06 805 (20,5) 305 (7,7) 241 (5,4) BB-124-06 564 (14,3) BB-224-06X .789 (20.0) _ 564 (14,3) BB-824-06 804 (20,4) 8 (4) 305 (7.7) 211 (5,4) BB-124-08 564 (14,3) BB-224-08X .789 (20,0) _ 564 (14,3) BB-824-08 804 (20,4) 372 (9.4) .269 (6,8) BB-127-08 687 (17,4) BB-227-08X 912 (23,2) 687 (17,4) BB-827-08 927 (23,8) 10 (-} 372 (9.4) 269 (6,8) BB-127-10 687 (17,4) 8B-227-10X 912 (23,2) 687 (17,4) BB-827-10 927 (23,6) 16-14 5-6 (3-3,5) | .385 (9.8) 301 (7,7) _ 812 (20,6) _ 4.103 (28,0) +B-841-06HD 1.118 (28,4) 1.23.0mm: | g (4) 385 (9,8) 301 (7,7) ~ 812 (20,6) ~ 1.103 (28,0) B-841-08HD 1.118 (28,4) Heavy 10) 385 (9.8) 301 (7,7) _ B12 (20,6) B-241-10HDX 1.103 (28,0) +B-841-10HD 1.118 (28,4) Duty 1/4 (6) 543 (13,8) 393 (10,0) B-168-14HD 965 (24,5} B-268-14HDX 1.256 (31,9) _ 1.271 (32,3) 5/16 (8) 543 (13,8) 393 (10,0) B-168-56HD 965 {24,5} _ 1.256 (31,9) _ 1.274 (32,3) 12-10 5-6 (3-3,5) | .385(9,8) 301 (7,6) C-141-06 812 (20,6) C-241-06X 1.103 (28,0) - 812 (20,6) $C-841-06 1.118 (28,4) 3.0-6.0mm: |g (4) 385 (9,8) 301 (7,6) C-141-08 812 (20,6) C-241-08X 1.103 (28,0) C-341-08 812 (20,6) +C-841-08 1.118 (28.4) 10) 385 (9,8) 301 (7.6) C-141-10 812 (20,6) C-241-10X 1.103 (28,0) C-341-10 812 (20,6) $C-841-10 1.118 (28,4) 1/4 (6) 543 (13,8) 393 (10,0) C-168-14 965 (24,5) C-268-14X 1.256 (31,9) _ 965 (24,5) +C-868-14 1.271 (32,3) 5/16 (8) 543 (13,8) 393 (10,0) C-168-56 965 (24,5) - 1.256 (31,9) C-368-56 965 (24,5) _ 1.271 (32,3) Product Specifications Material | Max. Wire Insulation Dia. Wire Barre! Thickness Insulation Circular Range Length Max. Color Insutkrimp Avikrimp | Mil Area 26-24AWG 145 (3,7) = 020 (1,9) Yellow 075 (1,9) 254-642 22-18AWG 175 (4.4) 082 (0,8) Red 145 (3,7) | .140 (3,6) | 309-2,600 16-14 Heavy Duty) 25064) 0501.3) | Yellow | .250(6.4) | -225(5,7) | 2,050-9,030 16-14 AWG ;175(44) , .082(0,8) | Blue 175 (4,4) 170 (4,3) | 2,080-5,180 12-10 AWG "(250 (64) > .040,0) | Yellow 250 (6,4) .225 (5,7) 5,180-13,100_ +For heavier wire insulation the maximum wire insulation diameter can be expanded to .255 (6,5) by adding X to the end of the part number. Note: For Terminals onMylar Tape, add T at the end of loose piece part number. CRIMP TIP... Facts About Crimped Joints barrel into a solid mass. On the other hand, finer strands will more readily fill the inside A fine stranded wire (large number of small diameter strands) usually improves contour of the crimp shape and more evenly distribute strand formation and imposed crimped joint performance. A wire composed of a few strands of larger size will tend to loads. act as a solid wire in the crimp. Some stranded wire crimp configurations are not satis- Brazed barrel terminals usually give higher tensile test than the non-brazed (for spe- factory for solid wire. More deformation must be imposed in order to form wire and cific values, tensile tests must be performed on each part.)