COMX-P1022 Module based on the COM Express Form Factor QorIQ processing power on a module for rapid deployment across diverse I/O requirements nn Freescale dual-core QorIQTM P1022 processor nn Two cores running at 1.067 GHz nn Supports up to 2GB DDR3 SO-DIMM nn 95 mm x 95 mm compact footprint nn DVI and LVDS Video output nn I2C Audio nn Ultra low power processing module (< 7 W) The COMX-P1022 small form factor module brings the Freescale QorIQTM P1022 dual-core processor onto a module that incorporates the mechanical features and dimension of the COM Express specification. The QorIQ P1022 processor is effectively a System-on-Chip device with a range of features including USB, PCI Express, Gigabit Ethernet, memory controller, general purpose I/O and SD/MMC flash controller. The overall dimensions of the COMX-1022 are 95 mm x 95 mm following the definition of a Compact COM Express module and this enables it to be fitted within a very wide range of enclosures when mounted on a customer carrier. COMX-P1022 is an off-the-shelf processor solution that is backed by one of the world's leading embedded computing companies for peace of mind and fast time to market by isolating you from the complexities of the high speed processor, memory and graphics devices. To ease the development cycle further, Emerson supplies a development carrier card as well as a carrier designer's guide and other resources. By combining the tried and tested Power Architecture processor core along with a considerable range of on module I/O, the COMX-P1022 is suitable for a range of applications including programmable automation controllers, security gateways, civil aeronautics, renewable energy controllers, test and measurement and other embedded devices. The COMX-P1022 is supported by a range of real-time operating systems and development tools. COMX-P1022 Block Diagram DVI ECC DDR3 SO-DIMM 72-bit LVDS PCIe x1 PCIe x1 PCIe x2 SATA SATA USB COP JTAG QorIQ P1022 USB Hub 4xUSB Ethernet Ethernet SPI GPIO x8 UART UART System inc Tamper Detect, Interrupt, Reset, Watchdog Timer, Status SDIO MicroSD Slot 2 COM Express AB and CD connectors Hardware Specifications POWER PROCESSOR 12 V and 5 V standby (optional) Freescale QorIQ P1022, dual-core e500 Power Architecture device running at 1.067 GHz ACCESSORIES Heatsink, heat spreading plate, development carrier FORM FACTOR 95 mm x 95 mm COM Express type module POWER CONSUMPTION < 7 W BOOTLOADER U-boot COMPLIANCE & CERTIFICATIONS RoHS 6/6 VIDEO UL/CSA 60950-1, EN55022, FCC Class B DVI and LVDS available to the carrier MEMORY Support for up to 2GB DDR3-667 in one SO-UDIMM ON-BOARD STORAGE MicroSD card slot 2kbit I2C EEPROM Firmware and Operating System Support OS SUPPORT BSPs to be available from partners including: cc Mentor Graphics Linux ON-BOARD I/O cc Wind River VxWorks 6.8 JTAG cc Green Hills INTEGRITY I/O TO THE CONNECTORS Two (2) Gigabit Ethernet interfaces Two (2) SATA ports Four (4) USB 2.0 Two (2) PCI Express x1 interfaces One (1) PCI Express x2 interface Eight (8) general purpose I/O (GPIO) ports Two (2) UART interfaces 3 Ordering Information Product Description COMX-P1022 P1022 processor module COMX-P1022-HSP P1022 heat spreading plate COMX-P1022-HTSNK P1022 active heatsink COMX-P1022-2G-KIT P1022 with 2GB DRAM and heatsink COMX-CAR-P1 QorIQ module carrier card P1022COME-DS-PB Freescale Development System including the P1022 module, carrier, memory and driver. This kit is available from Freescale and Freescale distributors. For more information go to www.Freescale.com SOLUTION SERVICES Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. COM Express is a trademark of PICMG. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power's licensee, licensee's transferees, and licensee's customers and users. Availability of some of the products and services described herein may be restricted in some locations. Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. AC Power Embedded Power Connectivity Infrastructure Management & Monitoring Racks & Integrated Cabinets DC Power Outside Plant Services Embedded Computing Power Switching & Controls Surge Protection Emerson Network Power Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Paris, France +33 1 60 92 31 20 * Munich, Germany +44 1509 236490 * Tel Aviv, Israel +972 9 9560361 Hong Kong +852 2176 3540 * Shanghai, China +86 21 3395 0289 * Tokyo, Japan +81 3 5403 2730 * Seoul, Korea +82 2 3483 1500 EmersonNetworkPower.com/EmbeddedComputing Precision Cooling Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. (c)2011 Emerson Electric Co. COMXP1022-D1 10/11