K
K
K
DO NOT
SCALE FROM
THIS PRINT
DESIGNED & DIMENSIONED
IN MILLIMETERS [INCHES]
K
TEMX-1XX-XX-XX.X-XX-D-XX-XX
No OF POSITIONS
-05 THRU -50 (PER ROW)
(5 POS INCREMENTS)
ROW SPECIFICATION
-D: DOUBLE ROW
LEAD STYLE
-02: SURFACE MOUNT
PLATING SPECIFICATION
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
-G: 10µ" GOLD IN CONACT AREA
3µ" ON TAIL
-FG: 3µ" FLASH GOLD ON ENTIRE
TERMINAL
OPTION
-TR: TAPE & REEL
-K: POLYIMIDE FILM
(USE K-500-300, SEE FIG 5, SHT 2)
OPTION
-A: ALIGNMENT PIN (SEE FIG 2, SHEET 2)
(NOT AVAILABLE WITH -LC OR -WT)
(NOT AVAILABLE WITH TEMS)
-LC: LOCKING CLIP (SEE FIG 3, SHEET 2)
(NOT AVAILABLE WITH -A OR -WT)
(NOT AVAILABLE WITH TEMS)
-WT: WELD TAB (SEE FIG 4, SHEET 2)
(NOT AVAILABLE WITH -A OR -LC)
(NOT AVAILABLE WITH TEMS)
STACK HEIGHT
-03.0: (6MM STACK HEIGHT) (T-1M58-03.0-XX)
-04.0: (7MM STACK HEIGHT) (T-1M58-04.0-XX)
-07.0: (10MM STACK HEIGHT) (T-1M58-07.0-XX)
BODY OPTION
(LEAVE BLANK IF OPTION NOT USED)
S: SLIM
(NOT AVAILABLE WITH -A, -LC, OR -WT)
(USE TEMS-XX-XX.X, SEE FIG 6, SHEET 2)
(ONLY AVAILABLE WITH -K-TR)
(No. OF POS x 0.800[.0315]) + 9.000[.3543]
REF
(No. OF POS x 0.800) + 5.000
REF
.196
3.50 .138
REF
5.00 .197
REF
0.25 .010
REF
REF
"D"
"B"
"A" REF
5.45 .215
REF
(SEE NOTE 5)
0.86 .034
REF
(SEE NOTE 5)
3.05 .120
REF
(SEE NOTE 5)
1.04 .041
REF
(SEE NOTE 5)
(No. OF POS -1) x 0.800
±0.130
.0315
±.005
(No. OF POS -1) x 0.800
±0.130
.0315
±.005
2
MAX SWAY
(TYP)
K
"A"
"A"
C
C
C
C
01
02
FIRST POSITION
INDICATOR
0.10 [.004]
SLOT
(SEE NOTES 5 & 6)
0.315
REF
.012
5.50 .217
1.600
.063
2
MAX TOE
(TYP)
SECTION "A"-"A"
TEM-XX-XX.X
T-1M58-XX.X-XX
C
C
C
FIG 1
(TEM-110-02-03.0-XX-D SHOWN)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
.8MM TIGER EYE MICRO TERMINAL
BY:
TEMX-1XX-XX-XX.X-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
B RAY
10-18-2007
2
1
SHEET SCALE: 4:1
INSULATOR: ZENITE ZE55201
, COLOR: BLACK
TERMINAL AND LOCKING CLIP: PHOS BRONZE 510
WELD TAB: BRASS ALLOY 260, FULL HARD
F:\DWG\MISC\MKTG\TEMX-1XX-XX-XX.X-XX-D-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2.
MINIMUM PUSHOUT FORCE FOR TERMINAL, LOCKING CLIP AND WELD TAB: 2.22N [0.50LBF].
3. POST HEIGHT VARIATION BETWEEN ANY TWO PINS: 0.13 [.005] MAXIMUM.
4. PARTS TO BE PACKAGED IN TRAYS UNLESS OTHERWISE SPECIFIED.
5. POSITIONS -05 THRU -20 WILL HAVE ONLY ONE SLOT PER SIDE.
POSITIONS -25 THRU -40 WILL HAVE TWO SLOTS PER SIDE.
POSITIONS -45 THRU -50 WILL HAVE THREE SLOTS PER SIDE.
6. SLOTS ONLY AVAILABLE IN -03.0 LEAD STYLE.
7. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED.
FOR QUANTITIES 50-124, NO LEADER, OR TRAILER WILL BE SUPPLIED.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION K
1.25
REF
.049
0.90
REF
.035
0.75
REF
.030
"S"
(SEE NOTE)
"R"
(SEE NOTE)
5.50
±0.13
.217
±.005
0.25 .010
NOTE: "R" = OVERALL LENGTH (REF)
"S" = {("R" - 5.50[.216])/2[.0787]} ± 0.51[.020]
FIG 5
(TEM-110-02-03.0-XX-D-K SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
"C"
(SEE TABLE 1)
1.00 .039
REF
(No OF POS x 0.800[.0315]) + 2.000
.079
REF
TEM-XX-XX.X-A
0.25 .010
REF
1.27 .050
(No OF POS x 0.80[.031])
+ 7.00[.276]
2
MAX SWAY (TYP)
C
C
LC-06-TM
TEM-XX-XX.X-LC
FIG 3
(TEM-110-02-03.0-XX-D-LC SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
0.30 .012
REF
+ 7.00[.276]
(No OF POS x 0.80[.031])
2
MAX SWAY (TYP)
"B"
"B"
C
TEM-XX-XX.X
0.50 .020
REF
1.84 .072
K
SECTION "B"-"B"
C
WT-36-XX-T
"S"
(SEE NOTE)
"R"
(SEE NOTE)
5.49
±0.13
.216
±.005
0.24 .010
NOTE: "R" = ((No. OF POS x 0.800) + 3.35) ± 0.05
"S" = {("R" - 5.50[.216])/2[.0787]} ± 0.51[.020]
FIG 6
(TEMS-110-02-XX.X-XX-D-K SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
TEMS-XX-XX.X
FIG 2
(TEM-110-02-03.0-XX-D-A SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIG 4
(TEM-110-02-03.0-XX-D-WT SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
TABLE 2
STACK HEIGHT
WELD TAB
-03.0
WT-36-02-X
-04.0
WT-36-03-X
-07.0
WT-36-04-X
SHEET OF
.8MM TIGER EYE MICRO TERMINAL
BY:
TEMX-1XX-XX-XX.X-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
B RAY
10-18-2007
2
2
SHEET SCALE: 3:1
REVISION K
F:\DWG\MISC\MKTG\TEMX-1XX-XX-XX.X-XX-D-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
