Design Ethernet Connectivity into Your Products Quickly and Economically The Lantronix Micro is a board-level product for OEM users who want to embed proven mainstream all of the elements needed for device networking a processor, real-time operating system (RTOS), a robust TCP/IP stack, a web server and a network Ethernet connectivity into their products quickly connection. All the connected product needs is a header, providing connections to power and a TTL and economically. serial port. Building Ethernet connectivity into a product is no The Micro brings over a decade of networking simple task. It requires a significant investment in experience, rock-solid IP firmware and extensive hardware and software integration - often in areas applications support to industrial and commercial outside of core competencies. So why build it yourself environments. when there is a cost-effective alternative? Measuring only 1.6 in x 1.9 in, the Micro can easily fit Lantronix embedded device networking products into almost any size serial device that would benefit provide proven, integrated hardware and software from network connectivity. A TTL connector provides solutions for manufacturers who want to add Ethernet the serial interface, and an RJ45 (10BASE-T) is available connectivity to their products. for Ethernet access. The Micro includes the same IP TM Device networking starts with a Device Server . These amazing products allow most any device with a serial port (TTL) to connect to Ethernet networks quickly and cost-effectively. Device Servers include protocol stack found on the other Lantronix products. Embedded Device Server TM Easily network-enable virtually any serial device Flexible, well-developed IP protocol stack Ethernet RJ45 (10Base-T) connector on the board TTL serial interface Two serial ports Accepts 5VDC regulated input power HTTP, Serial, Telnet and SNMP management Flash ROM for easy software upgrades Custom protocol support available Micro Embedded Device Server Board Layout and Pinouts LEDs (CON 4) Reset Switch Features Protocols ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP and HTTP RJ45 (CON2) Drill 3 Embedded Device Server TM Micro Networking Interface RJ45 (10Base-T) Ethernet 1 3 5 7 9 11 Serial Interface TTL level (Asynchronous) Data Rates 300 bps to 115.2 Kbps Serial Line Formats Characters: 7 or 8 data bits Stop bits: 1 or 2 Parity: odd, even, none Drill 2 Drill 1 Modem Controls DTR, RTS, CTS, DCD Flow Control XON/XOFF (Software) CTS/RTS (Hardware) Management HTTP SNMP Serial login Telnet login System Software Flash ROM standard: downloadable from a TCP/IP host (TFTP) or over serial port Diagnostic LEDs Transmit Data Receive Data Good Link CON1 (2 x 6 Pins) CON2 (RJ45) CON3 (2 x 2 pins in place of RJ45) Pin Function Pin Con1 1 +5V 1 TX+ Pin 1 Function TX+ 2 GND 2 TX- 2 TX- 3 RXA (Input) 3 RX+ 3 RX+ 4 TXA (Output) 4 NC 4 RX- 5 RTSA (Output) 5 NC 6 DTRA (Output) 6 RX- CON4 (2 x 4 pins in place of LEDs) 7 CTSA (Input) 7 NC Pin Function 8 DCDA (Input) 8 NC 1 +5V 9 R/V/A (Output) 2 +5V 10 RESET to be pulled low 3 LED2 11 RXB (Input - optional) 4 LED1 12 TXB (Output - optional) 5 +5V 6 +5V 7 LED3 8 LED "good link" Compatibility Ethernet: Version 2.0/IEEE 802.3 Power Requirements 5VDC +/-5% at ~ 200mA Ordering Information Contact your local Lantronix representative or Lantronix directly: United States sales@lantronix.com or call OEM sales support at 800-526-8764. Asia Pacific Region AsiaPacific_sales@lantronix.com Europe eu_sales@lantronix.com Japan japan_sales@lantronix.com Latin America & Caribbean la_sales@lantronix.com Memory Flash: 512K RAM: 128K NVRAM: 2K Bytes Environmental Standard Temperature 0 to 70 C (32 to 158 F) Storage Temperature -40 to 85 C (-40 to 185 F) Part Number and Description CO-E1-00AAR Micro with no RJ45 and LEDS, RoHS CO-E1-11AAR Micro Device Server, Ethernet, RoHS CO-E1-IAP-R Micro Industrial Protocol, RoHS CO-E1M-00AAR Micro with no RJ45 and LEDS, with MODBUS Firmware, RoHS CO-E1M-11AAR Micro with MODBUS Firmware, RoHS CO-E2-00AB-R Micro Generic, 2 Serial Port support with no RJ45 and LEDS, RoHS CO-E2-113AAR Micro, 2 Serial Port support and TTL Header on back of board, RoHS CO-E2-11AAR Micro with 2 Serial Port support, RoHS CO-E2-12AA-R Micro with no LEDS, but instead, Header Pins on the TTL side, RoHS CO-E2-21ABR Micro, Pin Header on TTL side instead of RJ45, RoHS CO-E2-22AAR Micro with 2 TTL Channels, RoHS CO-E2-22AB-R Micro with 2TTL Channel, RoHS CO-E2-IAPR Micro 2 Channel IAP, RoHS Physical Dimensions (L x W) 49.15 x 40 mm (1.935 x 1.575 in) Mechanical drawing available at www.lantronix.com Warranty 1-year limited warranty 15353 Barranca Parkway TTL (CON1) | Irvine | CA 92618 | USA | Tel: 800.526.8764 | Fax: 949.450.7249 | www.lantronix.com (c)2006, Lantronix, Inc. Lantronix is a registered trademark and Device Server is a trademark of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-300 05/06 DGS2500