P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 1Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors, Sulfur Resistant
DESIGN SUPPORT TOOLS
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, Vishay Sfernice’s proven precision thin film
wraparound resistors exceed requirements of
MIL-PRF-55342G characteristics Y ± 10 ppm/°C (-55 °C;
+155 °C) down to ± 5 ppm/°C (-55 °C; +155 °C).
FEATURES
• Load life stability 0.02 % typical at 8000 h
at 70 °C under Pd (0.033 % maximum)
• Low temperature coefficient down to 5 ppm/°C
(-55 °C; +155 °C)
• Very low noise < - 35 dB and voltage coefficient
< 0.01 ppm/V
• Wide resistance range: 10 to 86 M
depending on size
• Tolerances to ± 0.01 %
• In lot tracking 5 ppm/°C
• Termination: Thin film technology
• Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR
datasheet (www.vishay.com/doc?53053)
• Withstand moisture resistance test of AEC-Q200
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Notes
(1) Pn = nominal power : Pd = derated power intended to improve stability
(2) For ohmic range versus tolerance and TCR see detailed table on next page
(3) Model P0805 having the same size than P0705 and the same performances, only codification of P0805 remains
(4) With special assembly care
Note
• For temperature up to 230 °C, see PHT datasheet
(www.vishay.com/doc?53050)
click logo to get started
Available
Models
Available
Available
Available
Available
STANDARD ELECTRICAL SPECIFICATIONS
MODEL SIZE
RESISTANCE
RANGE (2)
()
RATED
POWER
W
Pn (1)
RATED
POWER
W
Pd (1)
LIMITING
ELEMENT
VOLTAGE
V
TOLERANCE
± %
TEMPERATURE
COEFFICIENT
± ppm/°C
P0302 0302 10 to 420K 0.040 0.030 25 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P0402 0402 10 to 1M 0.063 0.040 50 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P0505 0505 10 to 4M 0.125 0.050 50 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P0603 0603 10 to 3.2M 0.125 0.100 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P0805 (3) 0805 10 to 8M 0.200 0.125 150 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P1005 1005 10 to 7.5M 0.250 0.125 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P1206 1206 10 to 22M 0.330 0.250 200 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P1505 1505 10 to 13.8M 0.350 0.175 200 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P2010 2010 10 to 62M 1 (4) 0.500 300 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
P2512 2512 10 to 86M 2 (4) 1 300 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100
CLIMATIC SPECIFICATIONS
Operating temperature
range -55 °C; +155 °C
PERFORMANCE VS. HUMID SULFUR VAPOR
Test conditions 50 °C ± 2 °C, 85 % ± 4 % RH,
exposure time 500 h
Test results Resistance drift < (0.05 % R + 0.05 ),
no corrosion products observed
MECHANICAL SPECIFICATIONS
Substrate Alumina
Technology Thin film
Film Nickel chromium with mineral
passivation or CrSi
Protection Epoxy + silicone
Terminations
B type: SnPb over nickel barrier for
solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrierfor
other applications
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 2Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Model P0805 having the same size than P0705 and the same performances, only codification of P0805 remains
DIMENSIONS in millimeters (inches)
CASE SIZE
AB
CD/E
MAX. TOL.
+0.152 (+0.006)
MIN. TOL.
-0.152 (-0.006)
MAX. TOL.
+0.127 (+0.005)
MIN. TOL.
-0.127 (-0.005)
NOMINAL NOMINAL NOMINAL TOLERANCE
0302 0.75 (0.029) 0.60 (0.024)
0.5 (0.02)
± 0.127 (0.005)
0.15 (0.006) 0.08 (0.003)
0402 1.00 (0.039) 0.60 (0.024) 0.25 (0.010) 0.1 (0.004)
0505 1.27 (0.005) 1.27 (0.050)
0.38 (0.015)
0.13 (0.005)
0603 1.52 (0.060) 0.85 (0.033)
0805 1.91 (0.075) 1.27 (0.050)
1005 2.54 (0.100) 1.27 (0.050)
1206 3.06 (0.120) 1.60 (0.063) 0.40 (0.016)
1505 3.81 (0.150) 1.32 (0.052) 0.48 (0.019)
2010 5.08 (0.200) 2.54 (0.100)
2512 6.30 (0.248) 3.30 (0.130) 0.48 (0.019)
SUGGESTED LAND PATTERN (to IPC-7351A)
CHIP SIZE
DIMENSIONS in millimeters (inches)
Zmax. Gmin. Xmax.
0302 1.30 (0.051) 0.15 (0.006) 0.73 (0.029)
0402 1.55 (0.061) 0.15 (0.006) 0.73 (0.029)
0505 1.82 (0.072) 0.10 (0.004) 1.40 (0.055)
0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.039)
0805 2.76 (0.109) 0.74 (0.029) 1.40 (0.055)
1005 3.39 (0.133) 1.37 (0.054) 1.40 (0.055)
1206 3.91 (0.154) 1.85 (0.073) 1.73 (0.068)
1505 4.66 (0.183) 2.44 (0.096) 1.45 (0.057)
2010 5.93 (0.233) 3.71 (0.146) 2.67 (0.105)
2512 7.15 (0.281) 4.93 (0.194) 3.43 (0.135)
A
D
D
C
E
E
B
Gmin.
Zmax.
Xmax.
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 3Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POWER DERATING CURVE
TEMPERATURE COEFFICIENT
TCR CODE FILM
± 5 ppm/°C C (-55 °C; +155 °C) NiCr
± 5 ppm/°C Z (0 °C; +70 °C) NiCr
± 10 ppm/°C Y NiCr
± 25 ppm/°C E NiCr
± 50 ppm/°C H NiCr or CrSi
± 100 ppm/°C K NiCr or CrSi
07020 40 60 80 100 120 140 155
0
20
40
60
80
100
Ambient Temperature in °C
Rated Power (%)
BEST TOLERANCE AND TCR VS. OHMIC VALUE
STYLE RANGE
()
TOLERANCE
(± %) TCR CODE
0302
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 30K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 30K to 40K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 40K to 65K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 65K to 420K 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
0402
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 67K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 67K to 100K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 100K to 150K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 150K to 1M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
0505
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 187K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 187K to 260K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 260K to 400K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 400K to 4M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
0603
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 160K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 160K to 332K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 332K to 500K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 500K to 3M2 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 4Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Tolerance 0.05 % on request
0805
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 360K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 360K to 511K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 511K to 750K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 750K to 8M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
1005
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 400K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 400K to 550K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 550K to 810K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 810K to 7M5 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
1206
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 1M3 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 1M3 to 2M 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 2M to 3M5 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 3M5 to 22M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
1505
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 720K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 720K to 1M 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 1M to 1M5 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 1M5 to 13M8 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
2010
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 3M8 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 3M8 to 5M 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 5M to 7M5 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 7M5 to 62M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
2512
10 to < 50 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
50 to < 100 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
250 to 6M4 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 C; Z; Y; E; H; K
> 6M4 to 8M6 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 Z; Y; E; H; K
> 8M6 to 12M9 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K
> 12M9 to 86M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K
BEST TOLERANCE AND TCR VS. OHMIC VALUE
STYLE RANGE
()
TOLERANCE
(± %) TCR CODE
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 5Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POPULAR OPTIONS
For any option it is recommended to consult Vishay Sfernice for availability first.
Option: Enlarged Terminations
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heatsink
(see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film) www.vishay.com/doc?53048.
Option to order 0063: (applies to size 1206 / 1505 / 2010 / 2512).
DIMENSIONS (Option 0063) in millimeters
CASE SIZE
ABED
F
MAX. TOL.
+0.152
MIN. TOL.
-0.152
MAX. TOL.
+0.127
MIN. TOL.
-0.127
MAX. TOL.
+0.13
MIN. TOL.
-0.13
MAX. TOL.
+0.13
MIN. TOL.
-0.13
NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL MIN. MAX.
1206 3.06 1.60 0.40 1.215
0.63 0.50 0.76
1505 3.81 1.32
0.48
1.59
2010 5.08 2.54 2.215
2512 6.30 3.30 2.835
SUGGESTED LAND PATTERN (Option 0063)
CHIP SIZE DIMENSIONS (IN MILLIMETER)
Zmax. Gmin. Xmax.
1206 3.91
0.50
1.73
1505 4.66 1.45
2010 5.93 2.67
2512 7.15 3.43
A
B
D
E
F
Enlarged
termination
Uncoatted
ceramic
Bottom view for mounting
D
E
Gmin.
Zmax.
Xmax.
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 6Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Option: Marking
Option to order 0013:
Marking of ohmic value and tolerance:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2512: 4 digits marking (same codification than in the ordering procedure)
Tolerance indicated by a color dot.
Option to order 0014:
Marking of ohmic value:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2512: 4 digits marking (same codification than in the ordering procedure)
No standard marking available for smaller sizes.
A price adder will apply to the unit price of the parts for options 0013 and 0014.
Option: AEC-Q200
For moisture resistance test only.
Option to Order 0058:
Specific production process to withstand 85 °C/85 % at Pn/10
PACKAGING
ESD packaging available: waffle-pack, and plastic tape and
reel (low conductivity). Paper tape available in standard (for
size 0402) and upon request (ESD only) (for size 0603, 0805,
and 1206).
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code.
Tape and Reel
See Part Numbering information to get the quantity desired
by tape.
Notes
(1) Option to order 0058
(2) Typical drift ± 0.02 % at Pd
SIZE MOQ
NUMBER OF PIECES PER PACKAGE TAPE
WIDTH
WAFFLE PACK
2" × 2"
TAPE AND REEL
MIN. MAX.
0302 250 340
100
5000
8 mm
0402
100
0505
100
4000
0603 5000
0805
4000
1005 221
1206 140
1505 60
2010 2000
2512 50 12 mm
PERFORMANCE
TESTS CONDITIONS MIL OR CECC
REQUIREMENTS
TYPICAL
PERFORMANCES
Thermal shock MIL-PRF-55342G
MIL-STD-202 F-Method 107 F ± 0.05 % ± 0.02 %
Short time overload MIL-PRF-55342G
PARA 3.10.4.7.5 ± 0.05 % ± 0.01 %
Low temperature operation MIL-PRF-55342G
PARA 3.9 and 4.7.4 ± 0.05 % ± 0.01 %
Resistance to solder heat MIL-PRF-55342G
PARA 3.12, 4.7.7, 4.7.1.2 ± 0.05 % ± 0.03 %
Moisture resistance
MIL-PRF-55342G
PARA 3.13 and 4.7.8
MIL-STD-202 F-Method 106 E
± 0.10 % ± 0.01 %
CECC 56 days/40 °C/93 % RH ± 0.10 % ± 0.01 %
AEC-Q200 (1)
85 °C/85 % RH/Pn/10, 1000 h ± 0.5 % + 0.05 Max. < 0.3 % + 0.05
High temperature MIL-PRF-55342G
PARA 3.11 and 4.7.6 ± 0.05 % ± 0.05 %
Load life
MIL-PRF-55342G
8000 h Pn at 70 °C
MIL-STD-202 F-Method 108 A
± 0.5 % ± 0.1 % (2)
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 7Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) One should apply the datas mentioned on the 3 curves together to get the right performances
Maximum permissible pulse load Pi max. for single pulse (1)
Energy for single pulse (1)
Maximum permissible pulse voltage Ui max. for single pulse (1)
0.1
1
10
100
Pulse Duration t (s)
Permissible Pulse Power (W)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
P
0.00001
1
10
100
Pulse Duration t (s)
Permissible Pulse Energy (J)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
0.0001
0.001
0.01
0.1
10
100
1000
10 000
Pulse Duration t (s)
Permissible Pulse Voltage (V)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 8Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Maximum permissible pulse load Pi max.
1.2/50 μs lightning surge
10/700 μs lightning surge
0.1
1
10
100
Pulse Duration t (s)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
Permissible Pulse Power (W)
P
10
100
1000
10 000
Resistor Value (Ω)
Test Voltage (V)
10 100 1000 10 000 100 000
P2512
P1206
P0805
P0603
10
100
1000
10 000
Resistor Value (Ω)
Test Voltage (V)
10 100 1000 10 000 100 000
P2512
P2010
P1206
P0805
P0603
P
www.vishay.com Vishay Sfernice
Revision: 23-Feb-18 9Document Number: 53017
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PTRIM
Chips ready to be trimmed available. Please consult Vishay Sfernice.
Notes
• For CECC qualified, see RV datasheet (www.vishay.com/doc?60022)
• For ESCC qualified, see PHR datasheet (www.vishay.com/doc?53037) or PFRR datasheet (www.vishay.com/doc?53046)
• For High Temperature (230 °C), see PHT datasheet (www.vishay.com/doc?53050)
•For Strap (0 ), see PZR datasheet (www.vishay.com/doc?53053)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P0505Y1003BBT0999
GLOBAL MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION
P 0302
0402
0505
0603
0805
1005
1206
1505
2010
2512
K = ± 100 ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
Z = ± 5 ppm
(0 °C; +70 °C)
C = ± 5 ppm
(- 55 °C; + 155 °C)
The first three digits
are significant figures
and the last digit
specifies the number
of zeros to follow,
R designates
decimal point
10R0 = 10
3901 = 3900
1004 = 1 M
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: gold over
nickel barrier
For more
information
see
“Codification
of
packaging”
table
From 1 to 3
digits, leave
blank if
no option
B: lead bearing version
N and G: lead (Pb)-free/RoHS version
Historical Part Number examples:
P1206Y1001LNT100 (tapes of 100 pieces)
P1206H7151FBT250 (tapes of 250 pieces)
P1206Y1503WNT1K032 (tapes of 1000 pieces and option 32)
P1206Y2372BG (waffle pack)
Historical part numbers are not recommended, but can still be used for ordering.
CODIFICATION OF PACKAGING
CODE 18 PACKAGING
WAFFLE PACK
W100 min., 1 mult
WA 100 min., 100 mult (available only in size 1206)
PLASTIC TAPE (in standard for all sizes except 0402)
T100 min., 1 mult
TA 100 min., 100 mult
TB 250 min., 250 mult
TC 500 min., 500 mult
TD 1000 min., 1000 mult
TE 2500min., 2500 mult
TF Full tape (quantity depending on size of chips)
PAPER TAPE (available for 0402, 0603, 0805, and 1206. Please consult Vishay Sfernice for other sizes)
PT 100 min., 1 mult
PA 100 min., 100 mult
PB 250 min., 250 mult
PC 500 min., 500 mult
PD 1000 min., 1000 mult
PE 2500min., 2500 mult
PF Full tape (quantity depending on size of chips)
0505Y1003PBBT 9 99
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
