3MTM DIP Socket Screw Machine 100 Series * Accepts various DIP packages * Reliable four finger contact interface * Unique body design prevents air voids during soldering * Inner contact aligned to maximize contact surface area * Optional seal tape for closed-body configuration * See Regulatory Information Appendix (RIA) for chemical compliance information U TI N Glass Filled PPS UL 94V-0 Black N Brass Beryllium Copper 100 " [ 2.54 m ] min. Nickel 8 " [ 0.2 m ] min. Gold Gold Flash (RoHS compliant) Polyester White Electrical D IS C Insulation Material: Flammability: Color: Contact Material: Sleeve: Inner contact: Plating: Underplating Wiping Area: Terminal Area: Seal Tape (optional) Material: Color: Mating Device Leads: Rectangular Lead: Circular Lead: Length: Marking: TS-2115-D Sheet 1 of 2 O Physical ED Date Modified: August 8, 2008 W 0.38 ~ 0.50 mm X T 0.20 ~ 0.40 (0.50 mm max. Diagonal) o 0.40 ~ 0.50 mm 2.9 mm min. None Current Resistance: < 25m Current Rating: 1 A Insulation Resistance: 1,000 M at 500 V DC Withstanding Voltage: 1,000 VAC rms for 1 minute Environmental Temperature Rating: -65C to +125C Process Rating: 260C MAX for 5 seconds, (Dipping: One time) Not for reflow soldering. Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIP Socket Screw Machine 100 Series Contact Quantity Description 6 8 .1 .01 .005 [ ] Dimensions for Reference Only .300 [7.62] .400 [10.16] .200 [5.08] .300 [7.62] 100-008-0XX .400[10.16] .400 [10.16] .300 [7.62] .300 [7.62] 10 100-010-0XX .500 [12.70] .400 [10.16] .400 [10.16] .300 [7.62] 14 100-014-0XX .700 [17.78] .400 [10.16] .600 [15.24] .300 [7.62] 16 100-016-0XX .800 [20.32] .400 [10.16] .700 [17.78] .300 [7.62] 18 100-018-0XX .900 [22.86] .400 [10.16] .800 [20.32] .300 [7.62] 20 100-020-0XX 1.000 [25.40] .400 [10.16] .900 [22.86] .300 [7.62] 22 100-022-0XX 1.100 [27.94] .500 [12.70] 1.000 [25.4] .400 [10.16] 24 130-024-0XX 1.200 [30.48] .400 [10.16] 1.100 [27.94] .300 [7.62] 24 110-024-0XX 1.200 [30.48] .500 [12.70] 1.100 [27.94] .400 [10.16] 24 100-024-0XX 1.200 [30.48] .700 [17.78] 1.100 [27.94] .600 [15.24] 28 130-028-0XX 1.400 [35.56] .400 [10.16] 1.300 [33.02] .300 [7.62] 28 100-028-0XX 1.400 [35.56] .700 [17.78] 1.300 [33.02] .600 [15.24] 32 100-032-0XX 1.600 [40.64] .700 [17.78] 1.500 [38.10] .600 [15.24] 40 100-040-0XX 2.000 [50.80] .700 [17.78] 1.900 [48.26] .600 [15.24] 42 100-042-0XX 2.100 [53.34] .700 [17.78] 2.000 [50.80] .600 [15.24] 48 100-048-0XX 2.400 [60.96] .700 [17.78] 2.300 [58.42] .600 [15.24] 64 100-064-0XX 3.200 [81.28] 1.00 [25.40] 3.100 [78.74] .900 [22.86] N Note 1 .043 1.10 .091 2.3 .000 100-006-0XX .071 1.8 .020 0.5 .00 Dim D ED inch .0 Dim C U Tolerance Unless Noted Dim B TI N Inch [mm] Dim A A .161 4.1 B D CENTER RIB .134 - .177 [3.4 - 4.5] (.134 - .177) (3.4 - 4.5) D .004 ( 0.1) D .100 .003 2.54 0.08 .126 3.2 C C .004 ( 0.10) .055 1.4 .020 0.5 IS C .100 2.54 O DETAIL E .030 .002 0.76 0.05 NON-WOVEN POLYESTER FILM WITH SEAL TAPE (-001 TYPE) DETAIL E Notes: 1. Number of central ribs depends on contact quantity. 6-8Ld has no ribs. 10-32Ld has 1 rib. 40-48Ld has 2 ribs. 64Ld has 3 ribs| 2. Not for reflow soldering. CLEAR POLYESTER FILM Ordering Information 1X0-0XX-05X Contact Pitch / Dim. D: 0 = Standard (See Table) 1 = .400 in (24 Ld only) 3 = .300 in (Thin 24 Ld & 28 Ld only) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Contact Quantity (See Table) (RIA E1 and C1 Apply) Seal Tape: 0 = Without Seal Tape 1= With Seal Tape TS-2115-C Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. ED Appendix E2: European Union RoHS N TI N U Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. O In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. IS C Appendix E3: European Union RoHS D Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-D Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. ED CHINA Appendix C1: China RoHS TI N U Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. Appendix C2: China RoHS O N In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. D IS C Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-D Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. Important Notice D IS C O N TI N U ED The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2008. All rights reserved. RIA-2217B-D 3M is a trademark of 3M Company.