UNISONIC TECHNOLOGIES CO., LTD 2SA1201 PNP SILICON TRANSISTOR SILICON PNP EPITAXIAL TRANSISTOR DESCRIPTION The UTC 2SA1201 is designed for power amplifier and voltage amplifier applications. FEATURES *High voltage: VCEO= -120V *High transition frequency: fT=120MHz(typ.) *Pc=1 to 2 W(mounted on ceramic substrate) ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free 2SA1201L-x-AB3-R 2SA1201G-x-AB3-R SOT-89 Note: Pin Assignment: B: BASE C: COLLECTOR E: EMITTER www.unisonic.com.tw Copyright (c) 2011 Unisonic Technologies Co., Ltd Pin Assignment 1 2 3 B C E Packing Tape Reel 1 of 2 QW-R204-024.Ca 2SA1201 PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25C) PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Base Current RATINGS UNIT -120 V -120 V -5 V -800 mA -160 mA 500 mW Collector Power Dissipation PC 1000 (Note 2) mW Junction Temperature TJ 150 C Storage Temperature TSTG -55 ~ +150 C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Mounted on cermic substrate( 250mm2 x 0.8t ) ELECTRICAL CHARACTERISTICS(TA=25C, unless otherwise specified) PARAMETER Collector to Emitter Breakdown Voltage Emitter to Base Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current DC Current Gain Collector to Emitter Saturation Voltage Base to Emitter Voltage Transition Frequency Collector Output Capacitance SYMBOL VCBO VCEO VEBO IC IB SYMBOL V(BR)CEO V(BR)EBO ICBO IEBO hFE VCE(SAT) VBE fT COB TEST CONDITIONS IC= -10mA, IB=0 IE= -1mA, IC=0 VCB= -120V, IE=0 VEB= -5V, IC=0 VCE= -5V, IC= -100mA IC= -500mA, IB= -50mA VCE= -5V, IC= -100mA VCE= -5V, IC= -100mA VCB= -10V, IE=0, f=1MHz MIN TYP MAX UNIT -120 V -5 V -0.1 A -0.1 A 80 240 -1.0 V -1.0 V 120 MHz 30 pF CLASSIFICATION OF hFE RANK RANGE O 80 - 160 Y 120 - 240 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R208-024,Ca