UNISONIC TECHNOLOGIES CO., LTD
2SA1201 PNP SILICON TRANSISTOR
www.unisonic.com.tw 1 of 2
Copyright © 2011 Unisonic Technologies Co., Ltd QW-R204-024.Ca
SILICON PNP EPITAXIAL
TRANSISTOR
DESCRIPTION
The UTC 2SA1201 is designed for po wer amplifier and
voltage amplifier applications.
FEATURES
*High voltage: VCEO= -120V
*High transition frequency: fT=120MHz(typ.)
*Pc=1 to 2 W(mounted on ceramic substrate)
ORDERING INFORMATION
Ordering Number Package Pin Assignment Packing
Lead Free Halogen Free 1 2 3
2SA1201L-x-AB3-R 2SA1201G-x-AB3-R SOT-89 B C E Tape Reel
Note: Pin Assignment: B: BASE C: COLLECTOR E: EMITTER
2SA1201 PNP SILICON TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD 2 of 2
www.unisonic.com.tw QW-R208-024,Ca
ABSOLUTE MAXIMUM RATINGS (TA=25°C)
PARAMETER SYMBOL RATINGS UNIT
Collector-Base Voltage VCBO -120 V
Collector-Emitter Voltage VCEO -120 V
Emitter-Base Voltage VEBO -5 V
Collector Current IC -800 mA
Base Current IB -160 mA
Collector Power Dissipation PC 500 mW
1000 (Note 2) mW
Junction Temperature TJ 150 °C
Storage Temperature TSTG -55 ~ +150 °C
Note: 1. Absolute maximum ratings are those val ues beyond which the dev ice could be permanen tly damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Mounted on cermic substrate( 250mm2 × 0.8t )
ELECTRICAL CHARACTERISTICS(TA=25°C, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Collector to Emitter Breakdown Voltage V
(
BR
)
CEO I
C= -10mA, IB=0 -120 V
Emitter to Base Breakdown Voltage V
(
BR
)
EBO I
E= -1mA, IC=0 -5 V
Collector Cut-Off Current ICBO V
CB= -120V, IE=0 -0.1 μA
Emitter Cut-Off Current IEBO V
EB= -5V, IC=0 -0.1 μA
DC Current Gain hFE V
CE= -5V, IC= -100mA 80 240
Collector to Emitter Saturation Voltage VCE
(
SAT
)
I
C= -500mA, IB= -50mA -1.0 V
Base to Emitter Voltage VBE V
CE= -5V, IC= -100mA -1.0 V
Transition Frequency fT V
CE= -5V, IC= -100mA 120 MHz
Collector Output Capacitance COB V
CB= -10V, IE=0, f=1MHz 30 pF
CLASSIFICATION OF hFE
RANK O Y
RANGE 80 - 160 120 - 240
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other paramet ers) l isted i n products speci ficati ons of any and all UTC products descri bed or contai ned
herein. UTC products are not designed for use in life support appliances, devices or systems where
m alf uncti on of these product s can be reasonably ex pected t o result in per sonal i njur y. Reproduct ion in
whole or in part is prohibited without the prior written consent of the copyri ght owner. The inf ormation
presented in this document does not f orm part of any quotati on or contract , is bel iev ed to be accurat e
and rel iable and m ay be changed without notice.
