SSM3K44MFV TOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSM3K44MFV High Speed Switching Applications Analog Switch Applications Compact package suitable for high-density mounting * Low ON-resistance : RDS(ON) = 4.0 (max) (@VGS = 4 V) 1.20.05 0.320.05 * 0.220.05 Unit: mm 0.80.05 Drain-source voltage Rating Unit VDSS 30 V V VGSS 20 DC ID 100 Pulse IDP 200 Gate-source voltage Drain current Symbol Drain power dissipation (Ta = 25C) PD (Note 1) mW Channel temperature Tch 150 C Storage temperature Tstg -55 to 150 C Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Total rating, mounted on FR4 board (25.4 mm x 25.4 mm x 1.6 mm) 0.4 0.80.05 2 mA 150 3 0.130.05 Characteristics 1 0.50.05 Absolute Maximum Ratings (Ta = 25C) 0.4 1.20.05 : RDS(ON) = 7.0 (max) (@VGS = 2.5 V) VESM 1. Gate 2. Source 3. Drain Note: JEDEC JEITA TOSHIBA 2-1L1B Weight: 1.5 mg (typ.) 0.5mm 0.45mm 0.45mm 0.4mm Marking Equivalent Circuit 3 3 NT 1 2 1 2 Handling Precaution When handling individual devices (which are not yet mounted on a circuit board), be sure that the environment is protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects that come into direct contact with devices should be made of anti-static materials. 1 http://store.iiic.cc/ 2009-05-27 SSM3K44MFV Electrical Characteristics (Ta = 25C) Characteristics Symbol Gate leakage current Drain-source breakdown voltage Drain cut-off current Test Condition Min Typ. Max Unit IGSS VGS = 14 V, VDS = 0 V 1 A V (BR) DSS ID = 0.1 mA, VGS = 0 V 30 V IDSS VDS = 30 V, VGS = 0 V 1 A Vth VDS = 3 V, ID = 0.1 mA 0.8 1.5 V Forward transfer admittance Yfs VDS = 3 V, ID = 10 mA 25 mS Drain-Source on-resistance RDS (ON) ID = 10 mA, VGS = 4 V 2.2 4.0 ID = 10 mA, VGS = 2.5 V 4.0 7.0 8.5 5.3 9.4 50 200 Gate threshold voltage Input capacitance Ciss Reverse transfer capacitance Crss Output capacitance Coss Switching time Turn-on time ton Turn-off time toff VDS = 3 V, VGS = 0 V, f = 1 MHz VDD = 5 V, ID = 10 mA, VGS = 0 to 5 V pF ns Switching Time Test Circuit (a) Test circuit 5V (b) VIN Output 5V RL 0V 90% Input 50 0 10 s VDD (c) VOUT VDD = 5 V D.U. 1% Input: tr, tf < 5 ns (Zout = 50 ) Common Source Ta = 25C 10% VDD 10% 90% VDS (ON) tr ton tf toff Precaution Vth can be expressed as the voltage between gate and source when the low operating current value is ID = 100 A for this product. For normal switching operation, VGS (on) requires a higher voltage than Vth and VGS (off) requires a lower voltage than Vth. (The relationship can be established as follows: VGS (off) < Vth < VGS (on) ) Please take this into consideration when using the device. 2 http://store.iiic.cc/ 2009-05-27 SSM3K44MFV ID - VDS ID - VGS 250 1000 Common Source 4 Common Source Ta = 25C 3 VDS = 3 V 100 Drain current ID (mA) Drain current ID (mA) 200 10 2.7 150 2.5 100 2.3 50 Ta = 100C 10 -25C 25C 1 0.1 VGS = 2.1 V 0 0 0.5 1 1.5 Drain-Source voltage 0.01 0 2 1 VDS (V) 2 3 Gate-Source voltage RDS (ON) - ID VGS (V) RDS (ON) - VGS 10 6 Common Source Common Source ID = 10 mA 5 8 Drain-Source ON-resistance RDS (ON) () Drain-Source ON-resistance RDS (ON) () Ta = 25C 6 VGS = 2.5 V 4 4V 2 4 Ta =100C 3 25C 2 -25C 1 0 0 40 80 120 160 0 0 200 2 Drain current ID (mA) 4 Common Source ID = 10 mA Vth (V) 1.8 6 5 VGS = 2.5 V 4 3 4V 2 1 0 -25 8 10 VGS (V) Vth - Ta 2 Gate threshold voltage Drain-Source ON-resistance RDS (ON) () 7 6 Gate-source voltage RDS (ON) - Ta 8 4 1.6 Common Source ID = 0.1 mA VDS = 3 V 1.4 1.2 1 0.8 0.6 0.4 0.2 0 25 50 75 100 125 0 -25 150 Ambient temperature Ta (C) 0 25 50 75 100 125 150 Ambient temperature Ta (C) 3 http://store.iiic.cc/ 2009-05-27 SSM3K44MFV Yfs - ID IDR - VDS 1000 250 (mA) Drain reveres current IDR Forward transfer admittance Yfs (mS) Common Source 500 V DS = 3 V 300 Ta = 25C 100 50 30 10 5 3 1 1 10 100 200 Common Source VGS = 0 V Ta = 25C D 150 S 100 50 0 0 1000 IDR G -0.2 Drain current ID (mA) -0.4 -0.6 Drain-Source voltage t - ID 3000 Switching time t (ns) Switching time t (ns) toff tf 300 100 30 10 0.1 ton toff 1000 500 tf 300 ton 100 50 tr 30 tr 1 10 10 0.1 100 1 Drain current ID (mA) 10 PD - Ta Drain power dissipation PD (mW) (pF) 30 Capacitance C 250 Common Source VGS = 0 V f = 1 MHz Ta = 25C 50 10 Ciss Coss 5 3 Crss 1 0.5 0.3 1 Drain-Source voltage 100 Drain current ID (mA) C - VDS 100 0.1 0.1 -1.4 Common Source VDD = 3 V VGS = 0 to 2.5 V Ta = 25C 5000 500 50 -1.2 VDS (V) 10000 Common Source VDD = 5 V VGS = 0 to 5 V Ta = 25C 5000 1000 -1 t - ID 10000 3000 -0.8 10 Mounted on FR4 board (25.4 mm x 25.4 mm x 1.6mm, Cu Pad: 0.585 mm2 ) 200 150 100 50 0 0 100 VDS (V) 20 40 60 80 100 120 140 160 Ambient temperature Ta (C) 4 http://store.iiic.cc/ 2009-05-27 SSM3K44MFV RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 5 http://store.iiic.cc/ 2009-05-27