Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FK Type : A Features Low impedance (10 % to 30 % less than FC Series) Miniaturization (30 % to 40 % less than FC Series) Endurance : 105 C 3000 h to 5000 h RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current V.DC tan d Dissipation factor (tan d) Endurance -55 C to +105 C 6.3 V.DC to 35 V.DC 180 F to 12000 F 20 % (120 Hz/+20 C) I < 0.01 CV (A) After 2 minutes 6.3 10 16 25 35 0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 C) Add 0.02 per 1000 F for products of 1000 F or more. After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 C, the capacitors shall meet the limits specified bellow. Duration : 08: 3000 hours , 010: 4000 hours , 012.5 to 018: 5000 hours Capacitance change tan d DC leakage current Within 20 % of the initial value < 200 % of the initial limit Within the initial limit Shelf life After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Rated voltage (V.DC) 6.3 to 35 Frequency (Hz) Capacitance (F) 60 120 1k 10 k 100 k 180 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 to 12000 0.75 0.80 0.95 1.00 1.00 1200 Sleeve Pressure relief fd0.05 Dimensions 010 < 08 + L 14 min. 0D0.5 3 min. F0.5 - 0D0.5 L < 16 : L1.5 L > 20 : L2.0 (Unit : mm) 0D 8 10 16 18 L -- -- 12.5 to 25 30 to 40 -- -- 0d 0.6 0.6 0.6 0.8 0.8 0.8 F 3.5 5.0 5.0 5.0 7.5 7.5 12.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Case size/ Impedance/ Ripple current Impedance ()/(100 kHz) Case size (mm) (0DxL) 8 8 8 10 10 10 10 10 12.5 12.5 12.5 12.5 12.5 12.5 16 16 16 18 18 18 x x x x x x x x x x x x x x x x x x x x 11.5 15 20 12.5 16 20 25 30 15 20 25 30 35 40 15 20 25 15 20 25 Ripple current (mA r.m.s.)/(100 kHz) +20 C -10 C +105 C 0.090 0.062 0.044 0.063 0.049 0.035 0.033 0.025 0.048 0.029 0.022 0.018 0.016 0.014 0.038 0.026 0.019 0.036 0.025 0.018 0.180 0.124 0.088 0.126 0.098 0.070 0.066 0.050 0.096 0.058 0.044 0.036 0.032 0.028 0.076 0.052 0.038 0.072 0.050 0.036 630 860 1220 900 1240 1490 1680 2140 1400 1890 2280 2720 2940 3010 1800 2330 2760 2060 2640 2850 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (20 %) (V.DC) (F) 680 1000 1500 1800 2200 6.3 3300 4700 5600 6800 8200 12000 560 820 1200 1500 1800 10 2700 3900 4700 5600 6800 8200 0D L 8 8 10 8 10 12.5 10 10 10 12.5 16 12.5 18 12.5 16 12.5 12.5 16 18 18 8 8 10 8 10 12.5 10 10 10 12.5 16 12.5 18 12.5 16 12.5 12.5 16 18 18 11.5 15 12.5 20 16 15 20 25 30 20 15 25 15 30 20 35 40 25 20 25 11.5 15 12.5 20 16 15 20 25 30 20 15 25 15 30 20 35 40 25 20 25 Specification Lead length (mm) Ripple Lead space Impedance current Endurance Lead (100 kHz) (100 kHz) (hours) dia. Taping (+20 C) Straight (+105 C) 0d B () (mA r.m.s.) 630 0.090 3000 0.6 3.5 5.0 860 0.062 3000 0.6 3.5 5.0 900 0.063 4000 0.6 5.0 5.0 1220 0.044 3000 0.6 3.5 5.0 1240 0.049 4000 0.6 5.0 5.0 1400 0.048 5000 0.6 5.0 5.0 1490 0.035 4000 0.6 5.0 5.0 1680 0.033 4000 0.6 5.0 5.0 2140 0.025 4000 0.6 5.0 1890 0.029 5000 0.6 5.0 5.0 1800 0.038 5000 0.8 7.5 7.5 2280 0.022 5000 0.6 5.0 5.0 2060 0.036 5000 0.8 7.5 7.5 2720 0.018 5000 0.8 5.0 2330 0.026 5000 0.8 7.5 7.5 2940 0.016 5000 0.8 5.0 3010 0.014 5000 0.8 5.0 2760 0.019 5000 0.8 7.5 7.5 2640 0.025 5000 0.8 7.5 7.5 2850 0.018 5000 0.8 7.5 7.5 630 0.090 3000 0.6 3.5 5.0 860 0.062 3000 0.6 3.5 5.0 900 0.063 4000 0.6 5.0 5.0 1220 0.044 3000 0.6 3.5 5.0 1240 0.049 4000 0.6 5.0 5.0 1400 0.048 5000 0.6 5.0 5.0 1490 0.035 4000 0.6 5.0 5.0 1680 0.033 4000 0.6 5.0 5.0 2140 0.025 4000 0.6 5.0 1890 0.029 5000 0.6 5.0 5.0 1800 0.038 5000 0.8 7.5 7.5 2280 0.022 5000 0.6 5.0 5.0 2060 0.036 5000 0.8 7.5 7.5 2720 0.018 5000 0.8 5.0 2330 0.026 5000 0.8 7.5 7.5 2940 0.016 5000 0.8 5.0 3010 0.014 5000 0.8 5.0 2760 0.019 5000 0.8 7.5 7.5 2640 0.025 5000 0.8 7.5 7.5 2850 0.018 5000 0.8 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK0J681( ) EEUFK0J102L( ) EEUFK0J102( ) EEUFK0J152L( ) EEUFK0J152( ) EEUFK0J182S( ) EEUFK0J222( ) EEUFK0J222L( ) EEUFK0J332L EEUFK0J332( ) EEUFK0J332S( ) EEUFK0J472( ) EEUFK0J472S( ) EEUFK0J562L EEUFK0J562S( ) EEUFK0J682L EEUFK0J822L EEUFK0J822( ) EEUFK0J822S( ) EEUFK0J123S( ) EEUFK1A561( ) EEUFK1A821L( ) EEUFK1A821( ) EEUFK1A122L( ) EEUFK1A122( ) EEUFK1A152S( ) EEUFK1A182( ) EEUFK1A182L( ) EEUFK1A272L EEUFK1A272( ) EEUFK1A272S( ) EEUFK1A392( ) EEUFK1A392S( ) EEUFK1A472L EEUFK1A472S( ) EEUFK1A562L EEUFK1A682L EEUFK1A682( ) EEUFK1A682S( ) EEUFK1A822S( ) Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (20 %) (V.DC) (F) 390 680 820 1000 1200 1500 16 2200 2700 3300 3900 4700 5600 6800 270 390 470 560 820 1000 1200 25 1500 1800 2200 2700 3300 4700 0D L 8 8 10 8 10 10 12.5 10 10 12.5 16 12.5 18 12.5 12.5 16 12.5 18 16 18 8 8 10 8 10 10 12.5 10 12.5 10 16 12.5 18 12.5 16 12.5 12.5 16 18 18 11.5 15 12.5 20 16 20 15 25 30 20 15 25 15 30 35 20 40 20 25 25 11.5 15 12.5 20 16 20 15 25 20 30 15 25 15 30 20 35 40 25 20 25 Specification Lead length (mm) Ripple Lead space Impedance current Endurance Lead (100 kHz) (100 kHz) (hours) dia. Taping (+20 C) Straight (+105 C) 0d B () (mA r.m.s.) 630 0.090 3000 0.6 3.5 5.0 860 0.062 3000 0.6 3.5 5.0 900 0.063 4000 0.6 5.0 5.0 1220 0.044 3000 0.6 3.5 5.0 1240 0.049 4000 0.6 5.0 5.0 1490 0.035 4000 0.6 5.0 5.0 1400 0.048 5000 0.6 5.0 5.0 1680 0.033 4000 0.6 5.0 5.0 2140 0.025 4000 0.6 5.0 1890 0.029 5000 0.6 5.0 5.0 1800 0.038 5000 0.8 7.5 7.5 2280 0.022 5000 0.6 5.0 5.0 2060 0.036 5000 0.8 7.5 7.5 2720 0.018 5000 0.8 5.0 2940 0.016 5000 0.8 5.0 2330 0.026 5000 0.8 7.5 7.5 3010 0.014 5000 0.8 5.0 2640 0.025 5000 0.8 7.5 7.5 2760 0.019 5000 0.8 7.5 7.5 2850 0.018 5000 0.8 7.5 7.5 630 0.090 3000 0.6 3.5 5.0 860 0.062 3000 0.6 3.5 5.0 900 0.063 4000 0.6 5.0 5.0 1220 0.044 3000 0.6 3.5 5.0 1240 0.049 4000 0.6 5.0 5.0 1490 0.035 4000 0.6 5.0 5.0 1400 0.048 5000 0.6 5.0 5.0 1680 0.033 4000 0.6 5.0 5.0 1890 0.029 5000 0.6 5.0 5.0 2140 0.025 4000 0.6 5.0 1800 0.038 5000 0.8 7.5 7.5 2280 0.022 5000 0.6 5.0 5.0 2060 0.036 5000 0.8 7.5 7.5 2720 0.018 5000 0.8 5.0 2330 0.026 5000 0.8 7.5 7.5 2940 0.016 5000 0.8 5.0 3010 0.014 5000 0.8 5.0 2760 0.019 5000 0.8 7.5 7.5 2640 0.025 5000 0.8 7.5 7.5 2850 0.018 5000 0.8 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK1C391( ) EEUFK1C681L( ) EEUFK1C681( ) EEUFK1C821L( ) EEUFK1C102( ) EEUFK1C122( ) EEUFK1C122S( ) EEUFK1C152L( ) EEUFK1C222L EEUFK1C222( ) EEUFK1C222S( ) EEUFK1C272( ) EEUFK1C272S( ) EEUFK1C332L EEUFK1C392L EEUFK1C392S( ) EEUFK1C472L EEUFK1C472S( ) EEUFK1C562( ) EEUFK1C682S( ) EEUFK1E271( ) EEUFK1E391L( ) EEUFK1E471( ) EEUFK1E561L( ) EEUFK1E561( ) EEUFK1E821( ) EEUFK1E821S( ) EEUFK1E102L( ) EEUFK1E122( ) EEUFK1E152L EEUFK1E152S( ) EEUFK1E182( ) EEUFK1E182S( ) EEUFK1E222L EEUFK1E222S( ) EEUFK1E272L EEUFK1E332L EEUFK1E332( ) EEUFK1E332S( ) EEUFK1E472S( ) Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 100 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (20 %) (V.DC) (F) 180 270 390 560 680 820 35 1000 1200 1500 1800 2200 3300 0D L 8 8 10 8 10 10 12.5 10 12.5 10 16 12.5 18 12.5 12.5 16 12.5 16 18 18 11.5 15 12.5 20 16 20 15 25 20 30 15 25 15 30 35 20 40 25 20 25 Specification Lead length (mm) Ripple Lead space Impedance current Endurance Lead (100 kHz) (100 kHz) (hours) dia. Taping (+20 C) Straight (+105 C) 0d B () (mA r.m.s.) 630 0.090 3000 0.6 3.5 5.0 860 0.062 3000 0.6 3.5 5.0 900 0.063 4000 0.6 5.0 5.0 1220 0.044 3000 0.6 3.5 5.0 1240 0.049 4000 0.6 5.0 5.0 1490 0.035 4000 0.6 5.0 5.0 1400 0.048 5000 0.6 5.0 5.0 1680 0.033 4000 0.6 5.0 5.0 1890 0.029 5000 0.6 5.0 5.0 2140 0.025 4000 0.6 5.0 1800 0.038 5000 0.8 7.5 7.5 2280 0.022 5000 0.6 5.0 5.0 2060 0.036 5000 0.8 7.5 7.5 2720 0.018 5000 0.8 5.0 2940 0.016 5000 0.8 5.0 2330 0.026 5000 0.8 7.5 7.5 3010 0.014 5000 0.8 5.0 2760 0.019 5000 0.8 7.5 7.5 2640 0.025 5000 0.8 7.5 7.5 2850 0.018 5000 0.8 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK1V181( ) EEUFK1V271L( ) EEUFK1V271( ) EEUFK1V391L( ) EEUFK1V391( ) EEUFK1V561( ) EEUFK1V561S( ) EEUFK1V681L( ) EEUFK1V821( ) EEUFK1V102L EEUFK1V102S( ) EEUFK1V122( ) EEUFK1V122S( ) EEUFK1V152L EEUFK1V182L EEUFK1V182S( ) EEUFK1V222L EEUFK1V222( ) EEUFK1V222S( ) EEUFK1V332S( ) Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 100 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016