MOS FET Relays G3VM-61A1/D1 Compact, General-purpose, Analog-switching MOS FET Relay, with Dielectric Strength of 2.5 kVAC between I/O Using Optical Isolation * Upgraded G3VM-61 A/D Series. * Switches minute analog signals. * RoHS Compliant. Application Examples * Measurement devices * Security systems * Amusement machines Note: The actual product is marked differently from the image shown here. List of Models Contact form SPST-NO Terminals Load voltage (peak value) PCB terminals 60 VAC Model G3VM-61A1 Surface-mounting terminals Number per stick Number per tape 100 --- --- 1,500 G3VM-61D1 G3VM-61D1(TR) Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61A1 G3VM-61D1 4.580.25 6.40.25 4.580.25 6.40.25 7.620.25 7.620.25 0.80.25 +0.15 3.65 -0.25 +0.15 3.65 -0.25 0.25 Note: The actual product is marked differently from the image shown here. 1.20.15 2.5 min. 0.50.1 2.540.25 7.85 to 8.80 Weight: 0.25 g Note: The actual product is marked differently from the image shown here. 4.0 +0.25 -0.2 1.0 min. +0.1 -0.05 1.20.15 1.0 min. 10.0 max. 2.540.25 Weight: 0.25 g Terminal Arrangement/Internal Connections (Top View) G3VM-61A1 4 3 1 2 PCB Dimensions (Bottom View) G3VM-61A1 Four 0.8-dia. holes 2.54 (0.61) G3VM-61D1 4 3 1 2 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61D1 2.54 2.54 8.3 to 8.8 (1.52) (0.61) (1.52) 1.3 1.5 MOS FET Relays G3VM-61A1/D1 11 Absolute Maximum Ratings (Ta = 25C) Item Input LED forward current Symbol IF Repetitive peak LED forward IFP current Output Rating Unit Measurement conditions 50 mA 1 A 100 s pulses, 100 pps Ta 25C LED forward current reduction rate IF/C -0.5 mA/C LED reverse voltage VR 5 V Connection temperature Tj 125 C Load voltage (AC peak/DC) VOFF 60 V Continuous load current IO 500 mA ON current reduction rate ION/C -5.0 Note: Ta 25C mA/C Tj 125 C Dielectric strength between input and output (See note 1.) VI-O 2,500 Vrms AC for 1 min Operating temperature Ta -40 to +85 C With no icing or condensation Storage temperature Tstg -55 to +125 C With no icing or condensation Soldering temperature (10 s) --- 260 C 10 s Connection temperature 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Electrical Characteristics (Ta = 25C) Item Input Symbol Minimum Typical Maximum Measurement conditions Unit LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 A VR = 5 V Capacity between terminals CT --- 30 --- pF V = 0, f = 1 MHz IFT --- 1.6 3 mA IO = 500 mA RON --- 1 2 IF = 5 mA, IO = 500 mA Current leakage when the relay is open ILEAK --- 0.001 1.0 A VOFF = 60 V Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON COFF --- 130 --- pF V = 0, f = 1MHz CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- M VI-O = 500 VDC, RoH 60% Turn-ON time tON --- 0.8 2.0 ms Turn-OFF time tOFF --- 0.1 0.5 ms IF = 5 mA, RL = 200 , VDD = 20 V (See note 2.) Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit VDD --- --- 48 V Operating LED forward current IF 5 7.5 25 mA Continuous load current (AC peak/DC) IO --- --- 500 mA Operating temperature Ta - 20 --- 65 C 12 MOS FET Relays G3VM-61A1/D1 2. Turn-ON and Turn-OFF Times IF Capacity between I/O terminals Load voltage (AC peak/DC) Note: 1 4 2 3 RL VDD VOUT IF VOUT 10% t ON 90% t OFF Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 20 40 60 80 100 400 300 200 100 0 -20 120 Continuous load current vs. On-state voltage 0 20 IF = 5 mA 400 200 0 -200 -400 0 0.2 0.4 80 0.1 0.6 120 0.8 1 Turn ON, Turn OFF time tON, tOFF (S) VDD = 20 V RL = 200 1000 500 300 tOFF 100 50 50 LED forward current IF (mA) 1.6 1.8 IFT - Ta IO = 500 mA IF = 5 mA 3 2 1 0 20 40 60 80 100 IO = 500 mA t<1s 4 3 2 1 0 -20 0 20 40 60 80 100 Ambient temperature Ta () Current leakage vs. Ambient temperature I LEAK - Ta 3000 tON 1000 300 tOFF 100 VDD = 20 V RL = 200 30 tON 30 1.4 Trigger LED forward current vs. Ambient temperature Turn ON, Turn OFF time vs. Ambient temperature Ta = 25C 1.2 LED forward voltage VF (V) tON, tOFF - Ta 3000 10 1 5 tON, tOFF - IF 5 3 Ambient temperature Ta () 5000 3 100 4 0 -20 0.6 Turn ON, Turn OFF time vs. LED forward current Turn ON, Turn OFF time tON, tOFF (S) 60 5 On-state voltage VON (V) 30 1 10 RON - Ta On-state resistance RON () Continuous load current IO (mA) IO - VON Ta = 25C -0.2 40 On-state resistance vs. Ambient temperature 600 -0.4 Ta = 25C 30 Ambient temperature Ta Ambient temperature Ta () -600 -0.6 100 0.3 Trigger LED forward current I F T (mA) 0 500 Current leakage ILEAK (nA) 0 -20 IF - VF 600 LED forward current I F (mA) 100 Continuous load current I O (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 30 VOFF = 60 V 10 3 1 0.3 IF = 5 mA 100 300 10 -20 0 20 40 80 80 100 Ambient temperature Ta ( MOS FET Relays 0.1 -20 0 20 40 80 80 100 Ambient temperature Ta () G3VM-61A1/D1 13 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X302-E-1 MOS FET Relays 12/10 Specifications subject to change without notice G3VM-61A1/D1 Printed in USA