Part Number 856582 172.8 MHz SAW Filter Data Sheet Features * * * * * * * * * For multi carrier WCDMA applications Usable bandwidth 18 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 7.01 x 5.51 x 1.70 mm Bottom View 1 2 3 10 4 9 5 0.69 1.24 NOM. 1.35 MAX. 7.00 1.27 8 7 6 1.40 5.50 Pin No. 9 4 5,10 1,2,3 6,7,8 2.54 0.60 1.00 Description Input Output Ground Case ground Case ground Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.13mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 06-07 TriQuint Semiconductor, Inc. (c) Page 1 of 5 Part Number 856582 172.8 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Center Frequency Maximum Insertion Loss 163.8 - 181.8 MHz Lower 1 dB Bandedge (4) Upper 1 dB Bandedge Lower 3 dB Bandedge (4) Upper 3 dB Bandedge Lower 35 dB Bandedge (4) Upper 35 dB Bandedge Lower 42 dB Bandedge (4) Upper 42 dB Bandedge Relative Rejection (4) 80 - 152.8 MHz 192.8 - 500 MHz 500 - 1000 MHz Passband Variation 163.8 - 181.8 MHz Group Delay Variation 163.8 - 181.8 MHz Phase Variation 163.8 - 181.8 MHz Source/Load Impedance (5) Minimum Typical Maximum Unit - 172.8 - MHz 181.8 182.8 157.8 152.8 - 8.7 162.5 183.2 161.6 184.1 158.9 186.8 158.5 187.1 11 163.8 162.8 187.9 192.8 dB MHz MHz MHz MHz MHz MHz MHz MHz 42 42 42 52 48 70 - dB dB dB - 0.5 1.0 dB - 40 100 nsec - 4 50 15 - deg Notes: 1. 2. 3. 4. 5. All specifications are based on TriQuint test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to manufacturing tolerances Relative to minimum insertion loss This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 24nH 27nH 9 50 Single-ended Input 50 Subject to change or obsolescence without notice 47pF 4 1,2,3,5 6,7,8,10 Rev A 39pF 50 06-07 TriQuint Semiconductor, Inc. (c) 50 Single-ended Output Page 2 of 5 Part Number 856582 172.8 MHz SAW Filter Data Sheet Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 06-07 TriQuint Semiconductor, Inc. (c) Page 3 of 5 Part Number 856582 172.8 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 24nH 27nH 9 50 Single-ended Input 47pF 50 4 1,2,3,5 6,7,8,10 Marking 50 Single-ended Output 50 39pF PCB Footprint 1.34 .28 .99 1.34 .28 5.71 Pin 1 ID dot Date code .99 7.21 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 16.8 ID dot O330 0.3 2.0 4.0 O1.5 A 1.75 7.5 7.3 O102 16.0 Direction of travel O20.2 O13.0 2.0 2.2 5.8 8.0 O1.5 A Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 3000 units/reel Subject to change or obsolescence without notice Rev A 06-07 TriQuint Semiconductor, Inc. (c) Page 4 of 5 Part Number 856582 172.8 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JEDEC J-STD-020C Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev A Or contact one of our worldwide Network of sales offices, Representatives or distributors 06-07 TriQuint Semiconductor, Inc. (c) Page 5 of 5