MP6KE6.8A - MP6KE200CA (e3) Available 600 Watt Transient Voltage Suppressor Screening in reference to MIL-PRF-19500 available DESCRIPTION This screened MP6KE6.8A - MP6KE200CA series provides a variety of enhanced reliability choices. Uni- and bi- directional options, as well RoHS compliant versions, are available. These devices have the ability to clamp dangerous high voltage transients such as secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4. T-18 Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * Available in both unidirectional and bidirectional configurations * 3 lot norm screening performed on standby current I D * 100% surge tested devices * Optional 100% screening for avionics grade is available * Various screenings in reference to MIL-PRF-19500 are available. Refer to Hirel Non-Hermetic Product Portfolio for more details on the screening options. Also available in: DO-214AA package (J-bend surface mount) MSMBJ5.0A thru MSMBJ170CA (See part nomenclature for all options.) * DO-215AA package High reliability controlled devices have wafer fabrication and assembly lot traceability * Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B (Gull-wing surface mount) MSMBG5.0A thru MSMBG170CA * RoHS compliant versions are available APPLICATIONS / BENEFITS * Selections from 6.8 to 200 volts breakdown (V BR ) * Economical TVS series for thru-hole mounting * Protects sensitive components such as IC's, CMOS, Bipolar, BiCMOS, ECL, DTL, T L, etc * Protection from switching transients & induced RFI * Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively. * Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance: 2 Class 1: MP6KE6.8A to MP6KE130A or CA Class 2: MP6KE6.8A to MP6KE68A or CA Class 3: MP6KE6.8A to MP6KE36A or CA Class 4: MP6KE6.8A to MP6KE18A or CA * Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance: Class 1: MP6KE6.8A to MP6KE43A or CA Class 2: MP6KE6.8A to MP6KE22A or CA MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01007, Rev. B (9/17/13) (c)2013 Microsemi Corporation Page 1 of 6 MP6KE6.8A - MP6KE200CA (e3) MAXIMUM RATINGS @ 25 C unless otherwise stated Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm) lead length from body (1) Thermal Resistance, Junction to Ambient (2) Peak Pulse Power Dissipation 10/1000s Steady-State Power Dissipation @ TL = 25 C 3/8 inch (10 mm) from body Tclamping (0 volts to V (BR) min, theoretical) Symbol Value TJ and TSTG R JL -65 to +150 25 o R JA P PP 85 600 o PD 5 (1) 1.47 < 100 <5 3.5 260 Unidirectional Bidirectional (3) Forward Voltage Solder Temperature @ 10 s VF Unit o C C/W C/W W W ps ns V o C 2 Notes: 1. When mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 4). 3. At 100 amp peak impulse of 8.3 ms half-sine wave (unidirectional only). MECHANICAL and PACKAGING * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026. MARKING: Part number POLARITY: Cathode indicated by band. Bidirectional not marked. TAPE & REEL option: Standard per EIA-296 (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: Approximately 0.7 grams See Package Dimensions on last page. PART NOMENCLATURE M P6K E 6.8 C Reliability Level* M MA MX MXL (*see Hirel Non-Hermetic Product Portfolio) (e3) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant 5% Voltage Tolerance Polarity C = Bi-directional Blank = Unidirectional Point 6 kilowatt Encapsulated Plastic Package RF01007, Rev. B (9/17/13) A Working Standoff Voltage Rating (c)2013 Microsemi Corporation Page 2 of 6 MP6KE6.8A - MP6KE200CA (e3) Symbol V(BR) I (BR) ID I PP P PP V (BR) VC V WM SYMBOLS & DEFINITIONS Definition Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/C or mV/C. Breakdown Current: The current used for measuring Breakdown Voltage V (BR) . Standby Current: The current through the device at rated stand-off voltage. Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of I PP and V C . Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP ) for a specified waveform. Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. ELECTRICAL CHARACTERISTICS @ 25 C BREAKDOWN VOLTAGE PART NUMBER V (BR) @ V MIN V NOM MP6KE6.8A 6.45 6.8 MP6KE7.5A 7.13 7.5 MP6KE8.2A 7.79 8.2 MP6KE9.1A 8.65 9.1 MP6KE10A 9.5 10 MP6KE11A 10.5 11 MP6KE12A 11.4 12 MP6KE13A 12.4 13 MP6KE15A 14.3 15 MP6KE16A 15.2 16 MP6KE18A 17.1 18 MP6KE20A 19 20 MP6KE22A 20.9 22 MP6KE24A 22.8 24 MP6KE27A 25.7 27 MP6KE30A 28.5 30 MP6KE33A 31.4 33 MP6KE36A 34.2 36 MP6KE39A 37.1 39 MP6KE43A 40.9 43 MP6KE47A 44.7 47 MP6KE51A 48.5 51 MP6KE56A 53.2 56 MP6KE62A 58.9 62 MP6KE68A 64.6 68 MP6KE75A 71.3 75 MP6KE82A 77.9 82 MP6KE91A 86.5 91 MP6KE100A 95 100 MP6KE110A 105 110 MP6KE120A 114 120 MP6KE130A 124 130 MP6KE150A 143 150 MP6KE160A 152 160 MP6KE170A 161 170 MP6KE180A 171 180 MP6KE200A 190 200 Consult factory for higher voltages. NOTE 1: V MAX 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21 23.1 25.2 28.4 31.5 34.7 37.8 41 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 I (BR) mA 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RATED STANDOFF VOLTAGE MAX STANDBY CURRENT MAX CLAMPING VOLTAGE TEMPERATURE COEFFICIANT of V (BR) V C @ I PP PEAK PULSE CURRENT (see Fig. 2) I PP V WM I D @ V WM V 5.8 6.4 7.02 7.78 8.55 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53 58.1 64.1 70.1 77.8 85.5 94 102 111 128 136 145 154 171 A 1000 500 200 50 10 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77 85 92 103 113 125 137 152 165 179 207 219 234 246 274 A 57 53 50 45 41 38 36 33 28 27 24 22 20 18 16 14.4 13.2 12 11.2 10.1 9.3 8.6 7.8 7.1 6.5 5.8 5.3 4.8 4.4 3.4 3.6 3.3 2.9 2.7 2.6 2.4 2.2 %/ C 0.057 0.061 0.065 0.068 0.073 0.075 0.078 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 V(BR) o For bidirectional construction, capacitance will be one-half that shown in Figure 4. RF01007, Rev. B (9/17/13) (c)2013 Microsemi Corporation Page 3 of 6 MP6KE6.8A - MP6KE200CA (e3) PPP - Peak Pulse Power - kW GRAPHS tw - Pulse Width s Pulse Current in Percent of IPP FIGURE 1 Peak Pulse Power vs Pulse Time t - Time - ms Test waveform parameters: tr=10 s, tp=1000 s FIGURE 2 Pulse Waveform for 10/1000 s Exponential Surge RF01007, Rev. B (9/17/13) (c)2013 Microsemi Corporation Page 4 of 6 MP6KE6.8A - MP6KE200CA (e3) Peak Pulse Power (PPP) or Continuous Power in Percent of 25C Rating GRAPHS (continued) T L Lead Temperature C C - Capacitance - Picofarads FIGURE 3 Derating Curve V (BR) - Breakdown Voltage - Volts FIGURE 4 Typical Capacitance vs. Breakdown Voltage RF01007, Rev. B (9/17/13) (c)2013 Microsemi Corporation Page 5 of 6 MP6KE6.8A - MP6KE200CA (e3) PACKAGE DIMENSIONS NOTES: Cathode indicated by band. Dim LL BL BD LD RF01007, Rev. B (9/17/13) (c)2013 Microsemi Corporation Dimensions Inches Millimeters Min Max Min Max 1.00 25.4 0.330 0.350 8.39 8.89 0.130 0.145 3.31 3.68 0.038 0.042 0.97 1.06 Page 6 of 6