A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Series Datasheet - KSK-GR 560 Reed Switches www.standexmeder.com GR 560 Reed Switches Features: Miniature, General Purpose Applications: Position Detector, Level Sensor, Tampering Switch Markets: Industrial, HVAC, Security & Others Part Description: KSK- GR 560- XX XX Contact QTY Contact Form Switch Model Pull-In Excitation 1 A (SPST-NO) GR 560 10 - 50 (AT-Range) Contact Data Unit Rated Power (max.) Any DC combination of V&A not to exceed their individual max.'s Switching Voltage (max.) DC or peak AC Switching Current (max.) DC or peak AC Carry Current (max.) DC or peak AC Contact Resistance (max.) @ 0.5V & 10mA Breakdown Voltage (min.) DC or peak AC Operating Time (max.) Incl. Bounce; Measured with 40% Overdrive Release Time (max.) Measured with no Coil Excitation Test Coil Insulation Resistance (min.) 10 W 200 V 1.0 A 1.5 A 100 mOhm 300 V 0.5 ms 0.1 ms KMS-01 RH < 45%, 100 V Test Voltage Capacitance (typ.) @ 10kHz across open Switch Americas: EMEA: APAC: 1010 Ohm 0.2 pF +1.866.782.6339 | salesusa@standexmeder.com +49.7731.8399.0 | info@standexmeder.com +86.21.37606000 | salesasia@standexmeder.com Version 02 15.08.2016 H. Singh A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Series Datasheet - KSK-GR 560 Reed Switches KSK-GR 560 Reed Switch www.standexmeder.com Dimensions (mm) Overall Length (max.) 54.0 Glass Length (max.) 14.2 Glass Dia (max.) 2.3 Lead Dia. (max.) 0.6 Environmental Data Unit Shock Resistance (max.) 100 g 50 g Operating Temperature -40 to 125 C Storage Temperature Soldering Temperature (max.) -50 to 155 C 260 C 1/2 sine wave duration 11ms Vibration Resistance (max.) 5 sec. max. Life Test Data Glossary Contact Form Form A NO = Normally Open Contacts SPST = Single Pole Single Throw Form B NC = Normally Closed Contacts SPST = Single Pole Single Throw Form C Form E Load KSK-1A05/1 125V/80mA 100V/100mA Changeover SPDT = Single Pole Double Throw Bistable Contact 24V/10mA 12V/10mA Latching Type remains unchanged until a magnetic field of opposite polarity is present For KSK-1A04 Switches only "Form A" available 10V/1mA 5V/2mA 1,E+00 Handling & Assembly Instructions Use proper lead clamping or heat sinking techniques to prevent mechanical and/or heat stress to the glass seal during bending, cutting, soldering, and welding Mechanical shock as the result of dropping the reed switch typically from a distance of greater than 12" may change it's magnetic sensitivity and/or destroy the switch Any form of modification to the switch leads will alter it's magnetic sensitivity 1,E+02 1,E+04 1,E+06 1,E+08 1,E+10 Typical Number of Operations Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For general information only. For more specific information, please consult the product datasheet, available upon request. This series datasheet could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These change will be incorporated in future revisions. For deviating values, most current specifications and products please contact your nearest sales office. Americas: EMEA: APAC: +1.866.782.6339 | salesusa@standexmeder.com +49.7731.8399.0 | info@standexmeder.com +86.21.37606000 | salesasia@standexmeder.com Version 02 15.08.2016 H. Singh