A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – KSK-GR 560 Reed Switches www.standexmeder.com
GR 560
Reed Switches
Features: Miniature, General Purpose
Applications: Position Detector, Level Sensor, Tampering Switch
Markets: Industrial, HVAC, Security & Others
Part
Description: K S K - GR 560- XX XX
Contact QTY Contact Form Switch Model Pull-In Excitation
(AT-Range)
1 A (SPST-NO) GR 560 10 - 50
Contact Data
Unit
Rated Power
(max.)
Any
DC combination of V&A not to exceed their individual max.’s 10 W
Switching Voltage
(max.)
DC or
peak AC 200 V
Switching Current
(max.)
DC
or peak AC 1.0 A
Carry Current
(max.)
DC
or peak AC 1.5 A
Contact Resistance
(max.)
@
0.5V & 10mA 100 mOhm
Breakdown
Voltage (min.)
DC
or peak AC 300 V
Operating Time (max.)
Incl. Bounce; Measured with 40% Overdrive
0.5 ms
Release
Time (max.)
Measured
with no Coil Excitation 0.1 ms
Test
Coil KMS-01
Insulation
Resistance (min.)
RH <
45%, 100 V Test Voltage 1010 Ohm
Capacitance (typ.)
@ 10kHz
across open Switch 0.2 pF
Version 02
15.08.2016
H. Singh
Americas: +1.866.782.6339 | salesusa@standexmeder.com
EMEA: +49.7731.8399.0 | info@standexmeder.com
APAC: +86.21.37606000 | salesasia@standexmeder.com
KSK
-GR 560 Reed Switch
A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – KSK-GR 560 Reed Switches www.standexmeder.com
Environmental
Data Unit
Shock Resistance (max.)
1/2 sine wave duration 11ms
100 g
Vibration
Resistance (max.) 50 g
Operating Temperature
-40 to 125
°C
Storage Temperature
-50 to 155
°C
Soldering
Temperature (max.)
5 sec. max.
260 °C
Dimensions
(mm)
Length (max.) 54.0
Length (max.) 14.2
Dia (max.) 2.3
0.6
Glossary Contact Form
Form
A
NO = Normally Open Contacts
SPST = Single Pole Single
Throw
Form B
NC = Normally Closed
Contacts
SPST
= Single Pole Single Throw
Form C
Changeover
SPDT = Single Pole Double Throw
Form
E
Bistable Contact
Latching Type remains unchanged until a
magnetic field of opposite polarity is present
For KSK-1A04 Switches only “Form A” available
Handling
& Assembly Instructions
Use proper lead clamping or heat sinking techniques to
prevent mechanical and/or heat stress to the glass seal
during bending, cutting, soldering, and welding
Mechanical shock as the result of dropping the reed switch
typically from a distance of greater than 12” may change it’s
magnetic sensitivity and/or destroy the switch
Any form of modification to the switch leads will alter it’s
magnetic sensitivity
Life Test Data
Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For
general information only. For more specific information, please consult the product datasheet, available upon request.
This series datasheet could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These change will be
incorporated in future revisions.
For deviating values, most current specifications and products please contact your nearest sales office.
Version 02
15.08.2016
H. Singh
Americas: +1.866.782.6339 | salesusa@standexmeder.com
EMEA: +49.7731.8399.0 | info@standexmeder.com
APAC: +86.21.37606000 | salesasia@standexmeder.com
1,E+00 1,E+02 1,E+04 1,E+06 1,E+08 1,E+10
5V/2mA
10V/1mA
12V/10mA
24V/10mA
100V/100mA
125V/80mA
Typical Number of Operations
Load
KSK-1A05/1