T86 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount TANTAMOUNT(R), Molded Case, Hi-Rel COTS, Low ESR, Built-In-Fuse FEATURES * Terminations: 100 % matte tin, standard, tin/lead available * Molded case available in three case sizes * Compatible with "High Volume" automatic pick and place equipment * High ripple current carrying capability * Meets EIA 535BAAC case sizes * Weibull grading and surge current test options per MIL-PRF-55365 * Standard and low ESR options * Compliant to RoHS Directive 2002/95/EC * Moisture sensitivity level 1 Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE CHARACTERISTICS Capacitance Range: 0.47 F to 470 F Capacitance Tolerance: 10 %, 20 % Voltage Rating: 4 VDC to 50 VDC www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (Above 85 C voltage derating is required) ORDERING INFORMATION T86 D 107 K 010 E A A S TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C TERMINATION/ PACKAGING RELIABILITY LEVEL SURGE CURRENT ESR See Ratings and Case Codes Table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = 10 % M = 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V). C = Matte tin/ 7" (178 mm) reel H = Matte tin/ 7" (178 mm), 1/2 reel E = Tin/lead/ 7" (178 mm) reel L = Tin/lead/ 7" (178 mm), 1/2 reel A = 1.0 % B = 0.1 % S = Hi-Rel standard Z = Non-ER A = 10 cycles at + 25 C B = 10 cycles at - 55 C/+ 85 C S = 3 cycles at + 25 C S = Std. L = Low DIMENSIONS in inches [millimeters] L TW W H TH (MIN.) P CASE CODE EIA SIZE L W H P TW TH (MIN.) C 6032-28 0.236 0.012 [6.0 0.30] 0.126 0.012 [3.2 0.30] 0.098 0.012 [2.5 0.30] 0.051 0.012 [1.3 0.30] 0.087 0.004 [2.2 0.10] 0.039 [1.0] D 7343-31 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.110 0.012 [2.8 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] E 7343-43 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.157 0.012 [4.0 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] Revision: 03-Jan-12 Document Number: 40145 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T86 www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.47 C 0.68 C 1.0 C 1.5 C C 2.2 C C C/D 3.3 C C C/D C C/D D D/E 4.7 C 6.8 10 C C C C D C C C/D D/E 15 C C C C/D D D/E 22 C C C/D D D/E E 33 C C/D C/D D/E E 47 C/D C/D D/E E 68 C C/D D/E D E 100 C D/E D E E 150 D D D/E 220 D D/E E 330 D/E E 470 E CONSTRUCTION AND MARKING Indicates Fused Product Capacitance F Silver Adhesive Epoxy Encapsulation Anode Polarity Bar 22E10 Polarity Band XX Date Code Solderable Cathode Termination 2 Vishay Sprague Logo C, D, E, Cases MnO2/Carbon/ Silver Coating Sintered Tantalum Pellet Leadframe Fusible Wire Revision: 03-Jan-12 Voltage Solderable Anode Termination Marking: Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. The Vishay Sprague(R) trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Capital letter "E" stands for lead (Pb)-free terminations small cap letter "e" stands for SnPb Document Number: 40145 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T86 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DC LEAKAGE AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) STANDARD (S) MAX. ESR AT + 25 C 100 kHz () LOW (L) MAX. ESR AT + 25 C 100 kHz () 4 VDC AT + 85 C; 2.7 VDC AT + 125 C 68 C T86C686(1)004(2)(3)(4)(5) 2.7 8 1.40 0.40 100 C T86C107(1)004(2)(3)(4)(5) 4.0 8 0.80 0.40 150 D T86D157(1)004(2)(3)(4)(5) 6.0 8 0.60 0.30 220 D T86D227(1)004(2)(3)(4)(5) 8.8 8 0.60 0.40 330 D T86D337(1)004(2)(3)(4)(5) 13.2 15 0.60 0.30 330 E T86E337(1)004(2)(3)(4)(5) 13.2 8 0.50 0.30 470 E T86E477(1)004(2)(3)(4)(5) 18.8 16 0.50 0.25 6.3 VDC AT + 85 C; 4 VDC AT + 125 C 15 C T86C156(1)6R3(2)(3)(4)(5) 0.9 6 1.80 0.60 22 C T86C226(1)6R3(2)(3)(4)(5) 1.1 6 1.80 0.60 33 C T86C336(1)6R3(2)(3)(4)(5) 1.6 6 1.40 0.60 47 C T86C476(1)6R3(2)(3)(4)(5) 2.3 6 1.30 0.60 47 D T86D476(1)6R3(2)(3)(4)(5) 2.3 6 0.90 0.45 68 C T86C686(1)6R3(2)(3)(4)S 3.3 6 0.80 n/a 68 D T86D686(1)6R3(2)(3)(4)(5) 3.3 6 0.70 0.35 100 D T86D107(1)6R3(2)(3)(4)(5) 6.0 8 0.70 0.35 100 E T86E107(1)6R3(2)(3)(4)(5) 6.0 8 0.70 0.30 150 D T86D157(1)6R3(2)(3)(4)(5) 9.0 8 0.60 0.30 220 D T86D227(1)6R3(2)(3)(4)(5) 13.2 8 0.60 0.30 220 E T86E227(1)6R3(2)(3)(4)(5) 13.2 8 0.50 0.30 330 E T86E337(1)6R3(2)(3)(4)(5) 19.8 8 0.50 0.30 10 VDC AT + 85 C; 7 VDC AT + 125 C 10 C T86C106(1)010(2)(3)(4)S 1.0 6 1.80 n/a 15 C T86C156(1)010(2)(3)(4)(5) 1.5 6 1.80 0.60 22 C T86C226(1)010(2)(3)(4)(5) 2.2 6 1.40 0.50 33 C T86C336(1)010(2)(3)(4)(5) 3.3 6 1.30 0.40 33 D T86D336(1)010(2)(3)(4)(5) 3.3 6 0.90 0.40 47 C T86C476(1)010(2)(3)(4)S 4.7 6 1.00 n/a 47 D T86D476(1)010(2)(3)(4)(5) 4.7 6 0.70 0.40 68 D T86D686(1)010(2)(3)(4)(5) 6.8 6 0.70 0.35 68 E T86E686(1)010(2)(3)(4)(5) 6.8 6 0.70 0.35 100 D T86D107(1)010(2)(3)(4)(5) 10.0 8 0.60 0.30 150 D T86D157(1)010(2)(3)(4)(5) 15.0 8 0.60 0.30 150 E T86E157(1)010(2)(3)(4)(5) 15.0 8 0.50 0.40 220 E T86E227(1)010(2)(3)(4)(5) 22.0 8 0.50 0.30 16 VDC AT + 85 C; 10 VDC AT + 125 C 6.8 C T86C685(1)016(2)(3)(4)(5) 1.1 6 2.00 0.60 10 C T86C106(1)016(2)(3)(4)(5) 1.6 6 1.80 0.70 15 C T86C156(1)016(2)(3)(4)S 2.4 6 1.40 n/a Note * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, H, E, L (3) Reliability level: A, B, S, Z (4) Surge current: A, B, S (5) ESR: L, S Revision: 03-Jan-12 Document Number: 40145 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T86 www.vishay.com Vishay Sprague STANDARD RATINGS STANDARD (S) MAX. ESR AT + 25 C 100 kHz () LOW (L) MAX. ESR AT + 25 C 100 kHz () 6 1.30 0.70 6 0.90 0.45 5.3 6 1.00 0.50 5.3 6 0.70 0.35 MAX. DC LEAKAGE AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) CAPACITANCE (F) CASE CODE PART NUMBER 22 C T86C226(1)016(2)(3)(4)(5) 3.5 22 D T86D226(1)016(2)(3)(4)(5) 3.5 33 C T86C336(1)016(2)(3)(4)(5) 33 D T86D336(1)016(2)(3)(4)(5) 47 D T86D476(1)016(2)(3)(4)(5) 7.5 6 0.70 0.35 47 E T86E476(1)016(2)(3)(4)(5) 7.5 6 0.70 0.35 16 VDC AT + 85 C; 10 VDC AT + 125 C 68 D T86D686(1)016(2)(3)(4)(5) 10.9 6 0.60 0.30 100 E T86E107(1)016(2)(3)(4)(5) 16.0 8 0.60 0.30 150 E T86E157(1)016(2)(3)(4)S 24.0 10 0.40 n/a 20 VDC AT + 85 C; 13 VDC AT + 125 C 4.7 C T86C475(1)020(2)(3)(4)(5) 0.9 6 2.00 1.00 6.8 C T86C685(1)020(2)(3)(4)(5) 1.4 6 1.90 0.60 10 C T86C106(1)020(2)(3)(4)(5) 2.0 6 1.60 0.80 15 C T86C156(1)020(2)(3)(4)S 3.0 6 1.40 n/a 15 D T86D156(1)020(2)(3)(4)(5) 3.0 6 0.90 0.45 22 D T86D226(1)020(2)(3)(4)(5) 4.4 6 0.70 0.35 33 D T86D336(1)020(2)(3)(4)(5) 6.6 6 0.70 0.40 33 E T86E336(1)020(2)(3)(4)(5) 6.6 6 0.70 0.40 47 E T86E476(1)020(2)(3)(4)(5) 9.4 6 0.60 0.30 68 E T86E686(1)020(2)(3)(4)(5) 13.6 6 0.60 0.30 2.2 C T86C225(1)025(2)(3)(4)S 0.6 6 2.80 n/a 3.3 C T86C335(1)025(2)(3)(4)(5) 0.8 6 2.30 2.10 4.7 C T86C475(1)025(2)(3)(4)(5) 1.2 6 1.90 1.00 6.8 C T86C685(1)025(2)(3)(4)(5) 1.7 6 1.60 0.60 10 C T86C106(1)025(2)(3)(4)(5) 2.5 6 1.40 0.60 10 D T86D106(1)025(2)(3)(4)(5) 2.5 6 1.00 0.50 15 D T86D156(1)025(2)(3)(4)(5) 3.8 6 0.80 0.40 22 D T86D226(1)025(2)(3)(4)(5) 5.5 6 0.70 0.35 22 E T86E226(1)025(2)(3)(4)(5) 5.5 6 0.70 0.35 33 E T86E336(1)025(2)(3)(4)(5) 8.3 6 0.60 0.30 25 VDC AT + 85 C; 17 VDC AT + 125 C 35 VDC AT + 85 C; 23 VDC AT + 125 C 1.5 C T86C155(1)035(2)(3)(4)(5) 0.5 6 3.80 2.60 2.2 C T86C225(1)035(2)(3)(4)S 0.8 6 2.90 n/a 3.3 C T86C335(1)035(2)(3)(4)S 1.2 6 2.00 n/a 4.7 C T86C475(1)035(2)(3)(4)S 1.6 6 1.80 n/a 4.7 D T86D475(1)035(2)(3)(4)(5) 1.6 6 1.20 0.60 6.8 D T86D685(1)035(2)(3)(4)(5) 2.4 6 1.00 0.50 10 D T86D106(1)035(2)(3)(4)(5) 3.5 6 0.80 0.50 Note * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, H, E, L (3) Reliability level: A, B, S, Z (4) Surge current: A, B, S (5) ESR: L, S Revision: 03-Jan-12 Document Number: 40145 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T86 www.vishay.com Vishay Sprague STANDARD RATINGS STANDARD (S) MAX. ESR AT + 25 C 100 kHz () LOW (L) MAX. ESR AT + 25 C 100 kHz () 6 0.80 0.50 6 0.70 0.50 5.3 6 0.70 0.50 7.7 6 0.60 0.40 0.5 4 6.70 n/a 0.5 4 5.90 n/a T86C105(1)050(2)(3)(4)(5) 0.5 4 4.40 2.70 C T86C155(1)050(2)(3)(4)(5) 0.8 6 5.00 3.20 C T86C225(1)050(2)(3)(4)S 1.1 6 2.80 n/a 2.2 D T86D225(1)050(2)(3)(4)(5) 1.1 6 2.10 0.90 3.3 C T86C335(1)050(2)(3)(4)(5) 1.7 6 2.40 1.60 3.3 D T86D335(1)050(2)(3)(4)S 1.7 6 2.00 n/a 4.7 D T86D475(1)050(2)(3)(4)S 2.4 6 1.10 n/a 6.8 D T86D685(1)050(2)(3)(4)S 3.4 6 0.90 n/a 6.8 E T86E685(1)050(2)(3)(4)S 3.4 6 0.90 n/a MAX. DC LEAKAGE AT + 25 C (A) CAPACITANCE (F) CASE CODE PART NUMBER 10 E T86E106(1)035(2)(3)(4)(5) 3.5 15 D T86D156(1)035(2)(3)(4)(5) 5.3 15 E T86E156(1)035(2)(3)(4)(5) 22 E T86E226(1)035(2)(3)(4)(5) 0.47 C T86C474(1)050(2)(3)(4)S 0.68 C T86C684(1)050(2)(3)(4)S 1.0 C 1.5 2.2 MAX. DF AT + 25 C 120 Hz (%) 35 VDC AT + 85 C; 23 VDC AT + 125 C 50 VDC AT + 85 C; 33 VDC AT + 125 C Note * Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, H, E, L (3) Reliability level: A, B, S, Z (4) Surge current: A, B, S (5) ESR: L, S RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Revision: 03-Jan-12 Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 Document Number: 40145 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T86 www.vishay.com Vishay Sprague TYPICAL CURVES AT + 25 C, IMPEDANCE AND ESR VS. FREQUENCY "E" CASE "D" CASE 1.00 1.00 68 F, 20 VDC 0.10 IMPEDANCE ESR ESR/Z, ESR/Z, IMPEDANCE ESR 0.10 220 F, 10 VDC 330 F, 6.3 VDC 470 F, 4 VDC 0.01 0.01 0.1 1.0 10.0 100.0 0.1 1000.0 1.0 10.0 100.0 1000.0 FREQUENCY kHz FREQUENCY kHz POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 C (W) IN FREE AIR C 0.110 D 0.150 E 0.165 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 1/2 7" REEL C 500 250 D 500 250 E 400 200 PRODUCT INFORMATION Molded Guide * Pad Dimensions * Package Dimensions www.vishay.com/doc?40074 Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 03-Jan-12 www.vishay.com/doc?40110 Document Number: 40145 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000