Rack & Panel External Miniature Rectangular, Removable Contacts XAC Series XAC34SF2A010 XAC34PM1A000 XAC34PC1A700 Designed for external installation, the XAC is the MRAC removable contact connector equipped with protective shells and mounting plates for chassis or cable mounting on metal containers, bulkheads, or any outside surface equipment. Lighter and smaller than other external connectors, they provide dependable service under adverse conditions. Inserts are housed in protective shells and there is screw lock coupling of plug and receptacle. Current Rating: Up to 13 amps No. of Contacts: 9, 14, 18, 20, 26, 34, 42, 50, 66, 75, 104 Contacts: Contacts must be ordered separately. Select from crimp, solder, dip solder, shielded or wire wrap terminations. Electrical Data: Meets high potential performance requirements of MIL-C-28748. The dielectric withstanding voltage is one minute electrification at 2000 VAC. Military versions are QPL'd to M28748/3 and M28748/4. Dielectric: SPECIFICATIONS CATALOG NO. Winchester/Retconn XAC9-0300X XAC14-0300X XAC20-0300X XMRE9-0400X XMRE14-0400X XMRE20-0400X XMRE26-0300X XMRE26-0400X XMRE34-0300X XMRE34-0400X XMRE42-0300X XMRE42-0400X XMRE50-0300X XMRE50-0400X XMRE75-0300XP XMRE75-0300XS Polarization: Accessories: CATALOG NO. MS 18192-T8 MS 18192-T1 MS 18192-T2 MS 18192-S8 MS 18192-S1 MS 18192-S2 MS18192-T9 MS 18192-S9 MS18192-T3 MS 18192-S3 MS 18192-T4 MS 18192-S4 MS18192-T5 MS 18192-S5 MS 18192-T6 MS 18192-TXX XMRE75-0400XS XMRE75-0400XP XMRA66-0700 XMRA66-0800 XMRA 104-0700 XMRA 104-0800 XJTCMS605P XJTCMS605S XJTCMS608P XJTCMS608S XJTMS605P XJTMS605S XJTMS606P XJTMS606S XJMS602P XJMS602S Diallyl Phthalate, MIL-M-14, Type SDG-F, Color Gray Seven positions available for pin and slot polarization on shells. Additional polarization can be provided with various arrangements of jackscrews and guides. Shells, formed and drawn hoods, mounting plates, jackscrews and jacksockets. CATALOG NO. MS 18192SXX MS 18192-S6 MS 18193-T1 MS 18193-S1 MS 18193-T2 MS 18193-S2 MS 18194-1 MS 18194-2 MS 18194-3 MS 18194-4 MS 18195-1 MS 18195-2 MS 18195-3 MS 18195-4 MS 18196-1 MS 18196-2 XJMS603P XJMS603S XNMS700P XNMS700S XNMS702P XNMS702-S XMRA 14-0010 XMRA 20-0010 XMRA 34-0010 XMRA42-0010 XMRA50-0010 XMRA75-0010 XMRA66-0010 XMRA104-0010 MS 18196-3 MS 18196-4 MS 18197-1 MS 18197-2 MS 18197-3 MS 18197-4 MS 18198-1 MS 18198-2 MS 18199-1 MS 18199-2 MS 18199-3 MS 18199-4 MS 18200-1 MS 18200-2 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 11 Rack & Panel External Miniature Rectangular, Removable Contacts XAC Series CONNECTOR ASSEMBLIES Self-locking pins Turnable Jacksocket Plug Shell Jackscrew and Jacksocket Knobs Male Insert Turnable Jackscrew Fixed Jackscrew Mounting Plate Receptacle Shell Female Insert Fixed Jacksocket Receptacle DEFINITIONS OF CONNECTOR TERMS Plug: The complete connector half which has the plug shell as part of its assembly. Receptacle: The complete connector half which has the receptacle shell as part of its assembly. Shell: The metal housing in which a male or female insert is assembled. A shell is either a plug shell or a receptacle shell: Plug Shell - one which is designed to be inserted into a receptacle shell. Receptacle Shell - one which is designed to receive and enclose the plug shell upon engagement. Male Insert: The molded insulator body containing pin contacts. Female Insert: The molded insulator body containing socket contacts. Pin Contacts: Male Contacts that fit into the socket contacts. Socket Contacts: Female Contacts tubular in shape, which receive the pin contacts and retain them by spring tension. Polarization: A means of controlling the engagement of a plug and receptacle so that correct mating of the contacts is achieved. Accessories: Those components such as hoods and mounting plates which are attachable to a plug or receptacle to facilitate mounting and/or handling of the connector, and to prevent inadvertent cross-mating. Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 12 Rack & Panel External Miniature Rectangular, Removable Contacts XAC Series CONTACT ARRANGEMENTS Dimensions are for reference only and are subject to change. Outline drawings on request. Views are rear (wiring end) of female inserts. (Male inserts are opposite.) .44 .38 .44 .56 .22 .075 Typ .075 Typ .075 Typ .075 Typ 1.250 1.313 .937 1.313 1.000 1.563 1.000 1.250 .09R .09R .09R .13R .130 Typ .172 Typ XAC 9 XAC 14 .56 .75 .075 Typ .23 .13R .130 Typ XAC 18 XAC 20 .75 .47 .23 .47 .075 Typ .09R .13R .130 Typ .075 Typ .09R .88 .09R .075 Typ .23 .75 .47 .23 1.625 2.594 2.000 2.313 1.312 1.688 2.282 2.719 2.000 .09R Mounting Holes For No. 4 Machine Screws Mounting Holes For No. 4 Machine Screws .13R .150 Typ 1.125 .50 .25 .73 .180 Typ .130 Typ XAC 26 Mounting Holes For No. 4 Machine Screws .180 Typ XAC 34* XAC 42 1.234 1.109 .77 .23 1.531 .16R .73 .180 Typ XAC 50* .88 .075 Typ .075 Typ .44 2.750 2.719 2.281 2.282 1.969 Mounting Holes For No. 4 Machine Screws 1.109 .31R Mounting Holes For No. 4 Machine Screws 1.094 .180 Typ XAC 66 Winchester/Retconn 2.375 2.594 XAC 75 .16R .180 Typ Mounting Holes For No. 6 Machine Screws 1.469 .38R .180 Typ XAC 104* *For numerical contact identification instead of alphabetical, order XNAC**P or S available in sizes 34, 50, and 104. Sizes 66 and 75 have numerical contact identification as standard. The spacing, arrangement, and identificaion of contacts of the XAC inserts are the same as those found on the Series MRAC removable contact connectors for the same number of contacts. 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 13 Rack & Panel External Miniature Rectangular, Removable Contacts XAC Series JACKSCREW & JACKSOCKETS Dimensions are for reference only and are subject to change. Outline drawings on request. Views are rear (wiring end) of female inserts. (Male inserts are opposite.) .73 Fixed Jackscrews (F) Long Turning Jackscrews (C) Used With Hoods Short Turning Jackscrews (M) Used Only Without Hoods Monojacks (D) Used With Hoods SPECIFICATIONS Turnable jackscrew-jacksocket combination (M, C, or D) assembles on either Plug or Receptacle; the mating connector-half (either Receptacle or Plug) must then contain fixed jackscrew-jacksocket combination (F). Monojacks (D) are long turning one-peice locking devices with slotted and knurled head. Shaft has through-hole for safety wire. available with hoods only, in sizes 34, 42, 50, 66, 75, and 104. Both short and long turning jackscrews (M and C) have knurled and slotted knobs for locking by hand or screwdriver. Knob is assembled on shaft with hollow, removable, self-locking pin. Safety wiring of engaged halves is achieved by using the through-hole in self-locking pin in the knob. Drawings show extension of standard knobs beyond shell and beyond hood. APPLICATIONS Jackscrew locking device assures positive coupling of engaged connectors to prevent accidental disconnecting from vibration or physical shock. It also aids easy connection and separation of connector plug and LOCKING DEVICE receptacle. Mounted connector-half houses one non-turnable fixed jackscrew and jacksocket to insure connector polarization. Mating-half houses one of the three types of turning jackscrew and jacksocket (M, C, or D). SPECIFICATIONS WT. OZ. CODE See Notes MATERIAL AND LETTER 1&2 FINISH Jackscrew Fixed Jacksocket } Jackscrew Short Jacksocket }Turnable Jackscrew Long Jacksocket }Turnable Mono-Jackscrew Long Turnable Mono-Jacksocket Knob Standard Nickel Plated Brass F 0.15 M 0.30 C 0.45 D 1.07 Nickel Plated Brass -- -- Aluminum Anodized Stainless Steel with Passivating Dip Stainless Steel with Passivating Dip Note 1: Weights are for pairs; i.e. for a jackscrew and jacksocket, etc., so weight figure may be added once to weights of other accessories when computing total weight of plug or receptacle. Note 2: Weights of turnable jackscrews and turnable jacksockets include knob and rollpins, except mono-jackscrew and mono-jacksocket, which is a one-piece construction (shaft and knob made in one piece); weight of fixed jackscrew and jacksocket includes nuts. DIMENSIONS Standard Knobs - Extension Beyond Hood XAC Dimension A Dimension B 9* 14* 18* 20* 26 34 42 50 66 75 104 34 42 50 66 75 104 0300 0400 0700 0800 .55 .55 - - .55 .55 - - .55 .55 - - .55 .55 - - .77 .55 - - .58 .58 .58 .58 .53 .53 - - .53 .53 - - - - .64 .64 .52 .52 - - - .59 .55 .55 - - .59 .55 .55 - .52 - - - .38 .52 - - - .38 .53 .53 - - - - .38 .38 *On sizes 9, 14, 18, and 20, only large top opening hoods are available when (c) long turning jackscrews are used. Catalog Number for large top opening hoods is - 0300X. Example: XAC20-0300X Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 14 Rack & Panel External Miniature Rectangular, Removable Contacts XAC Series OUTLINE - JACKSCREWS .19 Dia. .50 .22 Dia. .078 INT. HEX. .22 Dia. .25 HEX. A A A A CW CU CX CZ .19 Dia. .22 Dia. .97 .33 Dimensions are for reference only and are subject to change. Outline drawings on request. MW MU .25 HEX. 6-32 UNC 2 THD. (TYP.) .73 .23 MX FZ DIMENSIONS All jackscrews and sockets are stainless steel, passivated (except F & D which are nickel plated brass). All knobs are aluminum, anodized except MW and CW which are stainless steel, passivated. Size 9 14 18 20 26 34 42 50 66 75 9 14 18 20 26 34 42 50 66 75 Hoods Hoods Size 0300 0400 0300X 0400X 0700 0800 0300 0400 0300X 0400X 0700 0800 Dimension A - Type CW .36 .36 .36 - .36 .36 .36 - .36 .36 .36 - .36 .36 .36 - .36 .36 .36 - .39 .39 .39 .47 .34 .34 .34 - .34 .34 .34 - - - - .47 .33 .33 .33 - Dimension A - Type CU - .61 .61 .61 - - .61 .61 .61 - - .61 .61 .61 - - .61 .61 .61 - .61 .61 .61 .61 - .64 .64 .64 .64 .72 .59 .59 .59 .59 - .59 .59 .59 .59 - - - - - .72 .58 .58 .58 .58 - - - - - .36 .39 .34 .34 - .33 - - - - - .47 - - .47 - 9 14 18 20 26 34 42 50 66 75 - - - - .77 .52 .47 .47 - .45 - - - - - .72 - - .72 - 9 14 18 20 26 34 42 50 66 75 - - - - .92 .64 .59 .59 - .58 Dimension A - Type CX .48 .48 .48 - .48 .48 .48 - .48 .48 .48 - .48 .48 .48 - .48 .48 .48 - .52 .52 .52 .61 .47 .47 .47 - .47 .47 .47 - - - - .61 .45 .45 .45 - Dimension A - Type CZ .61 .61 .61 - .61 .61 .61 - .61 .61 .61 - .61 .61 .61 - .61 .61 .61 - .64 .64 .64 .72 .59 .59 .59 - .59 .59 .59 - - - - .72 .58 .58 .58 - - - - - - .61 - - .61 - - - - - - .72 - - .72 - Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 15 Rack & Panel XAC Series External Miniature Rectangular, Removable Contacts OUTLINE HOODS - DRAWN ALUMINUM Dimensions are for reference only and are subject to change. Outline drawings on request. The XAC Series uses standard XMRA/ XMRE protective hardware. To order separately, use XMRE/XMRA catalog numbers indicated. .08 .08 Top Cable Opening .08 Side Cable Opening DIMENSIONS XMRA Drawn Hoods for use with XAC Connectors. Hoods - Side Cable Opening ForUse With Hood Part No. (If ordered separately) Type C Jack XMRA 34-0800 Sockets and XMRA 66-0800 Jackscrews A B DIMENSIONS C D E F G 2.09 .84 2.38 1.22 2.84 1.63 1.17 2.58 .64x.75 1.688 1.06 1.17 2.91 .84D 1.969 1.34 2.23 3.38 1.19D 2.375 1.63 2.09 .84 Type D Jack XMRA 34-0800D Sockets and XMRA 66-0800D 2.38 1.22 Jackscrews XMRA 104-0800D 2.84 1.63 1.17 2.58 .64x.75 1.688 1.06 1.17 2.91 .84D 1.969 1.34 2.23 3.38 1.19D 2.375 1.63 XMRA 104-0800 Type F Jackscrews XMRA 34-0200 XMRA 66-0200 XMRA 104-0200 2.09 .84 2.38 1.22 2.84 1.63 1.17 2.58 .64x.75 1.17 2.91 .84D 2.23 3.38 1.19D - - - DIMENSIONS C D E F 1.06 1.34 1.63 Hoods - Top Cable Opening ForUse With Hood Part No. (If ordered separately) Type C Jack XMRA 34-0700 Sockets and XMRA 66-0700 Jackscrews A B 2.09 .84 2.38 1.22 2.84 1.63 1.17 1.59 .66x.75 1.688 1.17 1.69 1.03D 1.969 2.23 2.75 1.19D 2.375 2.09 .84 Type D Jack XMRA 34-0700D Sockets and XMRA 66-0700D 2.38 1.22 Jackscrews XMRA 104-0700D 2.84 1.63 1.17 1.59 .66x.75 1.688 1.17 1.69 1.03D 1.969 2.23 2.75 1.19D 2.375 XMRA 104-0700 Type F Jackscrews XMRA 34-0900 XMRA 66-0900 XMRA 104-0900 2.09 .84 2.38 1.22 2.84 1.63 1.17 1.59 .66x.75 1.17 1.69 1.03D 2.23 2.75 1.19D - - - Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 16 Rack & Panel XAC Series External Miniature Rectangular, Removable Contacts OUTLINE HOODS - FORMED ALUMINUM Dimensions are for reference only and are subject to change. Outline drawings on request. Top Cable Opening Large Top Cable Opening Side Cable Opening DIMENSIONS XMRE Formed Hoods for use with XAC Connectors Hoods - Top Cable Opening For use with Monojacks XMRE 34-0300D XMRE 34-0300XD XMRE 42-0300D XMRE 42-0300XD XMRE 50-0300D XMRE 50-0300XD XMRE 75-0300D XMRE 75-0300XD For use with Type C Jacksockets & Jackscrews Hood Part No. For use with Fixed Jackscrews* A B C D E Dia. F Dia. 1.28 1.28 1.28 1.28 1.28 1.28 1.25 1.25 1.30 1.30 1.30 1.30 1.31 1.31 1.31 1.25 1.31 1.56 1.63 1.63 2 2 2.31 2.31 2.59 2.59 2.59 2.59 1.58 1.58 1.78 1.58 1.72 1.78 1.69 1.75 1.73 1.80 1.73 1.80 1.75 1.86 .44 .50 .63 .50 .64 .64 .83 .83 .83 .83 .83 .83 1.19 1.19 .59 .59 .61 .66 .59 .78 .66 1.06 .63 1.06 .63 1.06 .63 1 .31 .38 .44 .38 .38 .44 - .56 - .56 - .56 .88 .88 (If ordered separately) XAC 9-0300X XAC 14-0300X XAC 18-0300X XAC 20-0300X XMRE 26-0300 XMRE 26-0300X XMRE 34-0300 XMRE 34-0300X XMRE 42-0300 XMRE 42-0300X XMRE 50-0300 XMRE 50-0300X XMRE 75-0300 XMRE 75-0300X XAC 9-0500XJ XAC 14-0500XJ XAC 18-0500XJ XAC 20-0500XJ XMRE 26-0500J XMRE 26-0500XJ XMRE 34-0500J XMRE 34-0500XJ XMRE 42-0500J XMRE 42-0500XJ XMRE 50-0500J XMRE 50-0500XJ XMRE 75-0500J XMRE 75-0500XJ Cable Opening Dimensions Wt. Oz. (Inc. 2 Cable Clamps and Screws) 0.3 0.3 0.4 0.3 0.4 0.6 0.7 0.8 1.0 * For use with G, K, or N guides, eliminate letter "J" from part number Hoods - Side Cable Opening For use with Monojacks XMRE 34-0400D XMRE 34-0400XD XMRE 42-0400D XMRE 42-0400XD XMRE 50-0400D XMRE 50-0400XD XMRE 75-0400D XMRE 75-0400XD For use with Type C Jacksockets & Jackscrews Hood Part No. For use with Fixed Jackscrews* A B C D E Dia. F Dia. 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.25 1.25 1.30 1.30 1.30 1.30 1.31 1.31 1.31 1.31 1.25 1.25 1.31 1.31 1.56 1.56 1.63 1.63 2 2 2.31 2.31 2.59 2.59 2.59 2.59 1.63 1.61 1.69 1.55 1.75 1.81 2 1.86 2.06 2.13 2.42 2.50 2.73 2.81 3.02 3.09 3.02 3.14 .44 .44 .5 .5 .38 .38 .5 .5 .64 .64 .83 .83 .83 .83 .83 .83 1.19 1.19 .31 .59 .38 .59 .44 .69 .38 .66 .59 .78 .66 .81 .63 .84 .63 1.06 .63 1 - .31 - .38 - .44 - .38 .38 .44 - .56 .5 .56 .5 .56 .88 .88 (If ordered separately) XMRE 9-0400 XMRE 9-0400X XMRE 14 -0400 XMRE 14-0400X XMRE 18-0400 XMRE 18-0400X XMRE 20-0400 XMRE 20-0400X XMRE 26-0400 XMRE 26-0400X XMRE 34-0400 XMRE 34-0400X XMRE 42-0400 XMRE 42-0400X XMRE 50-0400 XMRE 50-0400X XMRE 75-0400 XMRE 75-0400X XMRE 9-0600J XMRE 9-0600XJ XMRE 14-0600J XMRE 14-0600XJ XMRE 18-0600J XMRE 18-0600XJ XMRE 20-0600J XMRE 20-0600XJ XMRE 26-0600J XMRE 26-0600XJ XMRE 34-0600J XMRE 34-0600XJ XMRE 42-0600J XMRE 42-0600XJ XMRE 50-0600J XMRE 50-0600XJ XMRE 75-0600J XMRE 75-0600XJ Cable Opening Dimensions Wt. Oz. (Inc. 2 Cable Clamps and Screws) 0.3 0.3 0.4 0.3 0.4 0.6 0.7 0.8 1.0 * For use with G, K, or N guides, eliminate letter "J" from part number Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 17 Rack & Panel External Miniature Rectangular, Removable Contacts XAC Series OUTLINE SHELLS - RECEPTACLES Dimensions are for reference only and are subject to change. Outline drawings on request. .03R .06R B C ..140 Dia. 4 Holes B C B C .06R .14R Mtg. Hole Style 9 F .421 R. .384 R. .120 Dia. B C .28 B C .20 R. ED ED ED ED A .156 Typ. ED .06R .06R .06R .06R .06R .312 Typ. .120 Dia. 2 Holes Polarizing Slot For All XAC Configurations .14R For XAC 9 to 26 .120 Dia. 6 Holes G .114 G For XAC 34, 42, and 50 .120 Dia. 4 Holes .117 .383 .766 .500 For XAC 66 For XAC 75 G .150 Dia. 6 Holes .875 For XAC 104 DIMENSIONS SHELLS - RECEPTACLES Important Note When Ordering Plug and Receptacle Shells Shell Part No. The shell part numbers given in the table show an asterisk (*) where the code letter for the desired polarizing position belongs - example: XMRE9-2*000 becomes XMRE92B000 when polarization in position "B" is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XMRE9-2000. XMRE 9-2*000 XMRE 14-2*000 XMRE 18-2*000 XMRE 20-2*000 XMRE 26-2*000 XMRE 34-2*000 XMRE 34-4*000 XMRE 42-2*000 XMRE 42-4*000 XMRE 50-2*000 XMRE 50-4*000 XMRA 66-2*000 XMRA 66-4*000 XMRE 75-2*000 XMRE 75-4*000 XMRA 104-2*000 XMRA 104-4*000 TYPICAL SHELLS FOR MONOJACKS STYLE No. 4000 Shells are .040 in. thick. Shells are aluminum, anodized for protection against corrosion. Either shell style - plug or receptacle - may be used to house the female insert, thus allowing the "live" socket contacts to be cable or panel mounted, as desired. Shells also provide a means by which connector polarization is accomplished - the receptacle shell is slotted for engaging a polarizing pin on the plug shell. Any of seven positions (A, B, C, D, E, F or G) may be specified for polarization; non-polarized shells have the slot and pin omitted. For Connector Size A B (If ordered separately) DIMENSIONS C D E F G Wt. Oz. .88 .81 .88 1.13 1.19 .66 .66 .66 .66 .66 - - - - - 0.15 0.16 0.17 0.19 0.23 .75 1.687 1.44 .66 .234 0.25 .89 .75 2.000 1.75 .66 .234 0.28 2.86 1.02 .75 2.282 2.03 .66 .234 0.30 2.42 1.27 1.13 1.969 1.72 .66 .250 0.28 2.86 1.38 1.11 2.282 2.03 .66 - 0.32 2.91 1.69 1.48 2.375 2.13 .66 .437 0.30 A B 1.45 1.39 1.45 1.70 1.77 .52 .58 .70 .58 .70 .38 .45 .58 .45 .58 1.000 .937 1.000 1.250 1.312 2.14 .89 2.45 C Typ. A B Dia. 4 Corner Holes 2 Slots A C Typ. 4 Slots C 34, 42, 50, 66, 75 .11 .120 .06R 104 .14 .150 .07R For XAC 34, 42, 50, 66, and 104 Configurations Winchester/Retconn B Dia. 4 Corner Holes For XAC 75 Configuration Receptacle Shell Style No. 2000 Shells are .040 in. thick. 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 18 Rack & Panel External Miniature Rectangular, Removable Contacts XAC SERIES OUTLINE SHELLS - PLUGS Dimensions are for reference only and are subject to change. Outline drawings on request. B C B C .06R .03R .140 Dia. 4 Holes B C .120 Dia. 4 Holes B C .06R .14R Mtg. Hole Style 9 B C F .508 DE DE DE .06R .06R DE DE .06R .06R .06R A .156 Typ. .312 Typ. .150 Dia. 6 Holes .421 R. G .875 .120 Dia. 4 Holes For XAC 104 .117 .383 .766 .20 R. .120 Dia. 6 Holes .372 R. G .500 For XAC 75 .120 Dia. 2 Holes For XAC 66 The shell part numbers given in the table shows an asterisk (*) where the code letter for the desired polarizing position belongs - example: XMRE9-1*000 becomes XMRE9-1B000 when polarization in position "B" is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XMRE9-1000. Shells are .040 in. thick. Stainless steel shells available for 66 and 104 sizes. Dimensions vary from those shown for aluminum shells. Check sales for availability and dimensions on all sizes. Shell Part No. (If ordered separately) XMRE 9-1*000 XMRE 14-1*000 XMRE 18-1*000 XMRE 20-1*000 XMRE 26-1*000 XMRE 34-1*000 XMRE 34-3*000 XMRE 42-1*000 XMRE 42-3*000 XMRE 50-1*000 XMRE 50-3*000 XMRA 66-1*000 XMRA 66-3*000 XMRE 75-1*000 XMRE 75-3*000 XMRA 104-1*000 XMRA 104-3*000 .14R For XAC 34, 42, and 50 DIMENSIONS Important Note When Ordering Plug Shells G .468 A B DIMENSIONS C D E 1.44 1.38 1.44 1.69 1.75 .5 .56 .69 .56 .69 .38 .45 .58 .45 .58 1.000 .937 1.000 1.250 1.312 2.13 .88 2.44 2.84 .120 Dia. 2 Holes For XAC 75 For XAC 9 to 26 F G Wt. Oz. .88 .81 .88 1.13 1.19 .63 .63 .63 .63 .63 - - - - - 0.14 0.15 0.16 0.18 0.22 .75 1.687 1.44 .66 .234 0.24 .88 .75 2.000 1.75 .66 .234 0.26 1 .75 2.282 2.03 .66 .234 0.28 2.41 1.25 1.13 1.969 1.72 .66 .250 0.28 2.84 1.36 1.11 2.282 2.03 .66 - 0.30 2.88 1.66 1.48 2.375 2.13 .66 .437 0.30 Polarizing Pin For All XAC Configurations TYPICAL SHELLS FOR MONOJACKS STYLE No. 3000 Shells are aluminum, anodized for protection against corrosion. Either shell style - plug or receptacle - may be used to house the female insert, thus allowing the "live" socket contacts to be cable or panel mounted, as desired. Shells also provide a means by which connector polarization is accomplished - the receptacle shell is slotted for engaging a polarizing pin on the plug shell. Any of seven positions (A, B, C, D, E, F or G) may be specified for polarization; non-polarized shells have the slot and pin omitted. For Connector Size A B 4 Slots B Dia. 4 Corner Holes A B Dia. 4 Corner Holes 2 Slots C Typ. A C 34, 42, 50, 66, 75 .11 .120 .06R 104 .14 .150 .07R Winchester/Retconn C Typ. For XAC 75 Configuration For XAC 34, 42, 50, 66, and 104 Configurations Plug Shell Style No. 1000 Shells are .040 in. thick. 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 19 Rack & Panel External Miniature Rectangular, Removable Contacts XAC SERIES ORDERING INFORMATION Omit steps not required XAC Step 1 Step 2 Series: XAC, XNAC Numerical contact identification on sizes 34, 50, and 104. No. of Contacts: 9, 14, 18, 20, 26, 34, 42, 50, 66, 75, and 104 See note 1 below Step 3 Pin or Socket Contacts: P - Pin S - Socket Step 4 Jackscrews (See bottom chart) 9 P M Step 5 Step 6 Shell Type: Polarization Position: ** 0 No shell A, B, C, D, ** 1 Plug shell, E, F or G. style 1*000. Omit letter ** 2 Receptacle when shell, style polarization 2*000. is not ** 3 Plug shell, required. monojack type, style 3*000. ** 4 Receptacle, monojack type, style 4*000. ** 7 Stainless Steel Plug shell, style 7*000. ** 8 Stainless Steel Receptacle shell, style 8*000. 1 Step 7 (See bottom chart) A 0 Step 8 Mounting Plate: 00- When no mounting plate is required *10- Mounting plate, style #0010. Note: See section XMRA/E RP/ 57. *Mounting plates are not used with "M", "C" or "D" jackscrews. 00 Step 9 Special Gaskets: Omit letter when gaskets are not required. ** G- Bulkhead gasket, style #0000G. Use only when mounting plate is specified. ** F- Face gasket, style #0000F. Use with male insert only. ** B- If both gasket #0000G and gasket #0000F are desired. ** ** Check plant for availability on all gaskets. ** Polarizing Position Request availability ** information ** Step 4 Guides ** G- Cylindrical guide with single spring member. Recommended for ground only. ** KCylindrical guide with four spring members. May be used for electrical contact. ** NCylindrical guide without spring member. Recommended for extra mechanical strength. Jackscrews and Jacksockets *** M- Polarized short turnable jackscrew and jacksocket. Cannot be used with hoods. *** C- Polarized long turnable jackscrew and jacksocket for use with hoods. *** D- Polarized one-piece mono-jackscrew and mono-jacksocket (no separate knob); to be used with hoods on sizes: 34, 42, 50, 66, 75, and 104. *** Polarized fixed jackscrew and jacksocket ***Fusable with or without hood; (no knob required). ** MW- Same as M but with knurled round knob with internal hex. ** MU- Same as M but with knurled round knob with screwdriver slot. ** MX- Same as M but with hex knob. ** CW- Same as C but with knurled round knob with internal hex. ** CU- Same as C but with knurled round knob with screwdriver slot. ** CX- Same as C but with hex knob. ** CZ- Same as C but with prybar knob. Step 7 Formed Hoods: 0- No Hood. 3- Hood, top opening, style #0300, for use with Type "C" or "D" jackscrews. 4- Hood, side opening, style #0400, for use with Type "C" or "D" jackscrews. 5- Hood, top opening, style #0500J, for use with "F" style jackscrews. 6- Hood, side opening, style #0600J, for use with "F" style jackscrews. Deep Drawn Hoods: 7- Hood, top opening, style #0700, for use with Type "C" or "D" jackscrews. 8- Hood, side opening, style #0800, for use with Type "C" or "D" jackscrews. 9- Hood, top opening, style #0900, for use with "F" jackscrews. 2- Hood, side opening, style #0200, for use with "F" jackscrews. Note: Addition of "X" to code # indicates cable opening larger than std. See hoods for cable opening size. Example: XAC20PC1A300 X ** Request availability information *** Material: Nickel Plated Brass standard Note: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 20