SCHOTTKY RECTIFIER 12 Amp
12CWQ10FN
Major Ratings and Characteristics
IF(AV) Rectangular 12 A
waveform
VRRM 100 V
IFSM @ tp = 5 μs sine 330 A
VF@
6 Apk, TJ
= 125°C 0.65 V
(per leg)
TJrange - 55 to 150 °C
Characteristics Values Units
Description/ Features
The 12CWQ10FN surface mount, center tap, Schottky rectifier
series has been designed for applications requiring low forward
drop and small foot prints on PC board. Typical applications are
in disk drives, switching power supplies, converters, free-wheeling
diodes, battery charging, and reverse battery protection.
Popular D-PAK outline
Center tap configuration
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term reliability
IF(AV) = 12Amp
VR = 100V
Case Styles
D-PAK (TO-252AA)
Anode
13
4
Anode
2
Base
Common
Cathode
Common
Cathode
Bulletin PD-20548 rev. I 05/06
Document Number: 93218
www.vishay.com
1
12CWQ10FN
Bulletin PD-20548 rev. I 05/06
VFM Max. Forward Voltage Drop 0.80 V @ 6A
(Per Leg) * See Fig. 1 (1) 0.95 V @ 12A
0.65 V @ 6A
0.78 V @ 12A
IRM Max. Reverse Leakage Current 1 mA TJ = 25 °C
(Per Leg) * See Fig. 2 (1) 4 mA TJ = 125 °C
VF(TO) Threshold Voltage 0.47 V TJ = TJ max.
rtForward Slope Resistance 20.68 mΩ
CTTyp. Junction Capacitance (Per Leg) 183 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance (Per Leg) 5.0 nH Measured lead to lead 5mm from package body
TJMax. Junction Temperature Range (*) -55 to 150 °C
Tstg Max. Storage Temperature Range -55 to 150 °C
RthJC Max. Thermal Resistance (Per Leg) 3.0 °C/W DC operation * See Fig. 4
Junction to Case (Per Device) 1. 5
wt Approximate Weight 0.3 (0.01) g (oz.)
Case Style D-Pak Similar to TO-252AA
Marking Device 12CWQ10FN
Thermal-Mechanical Specifications
TJ = 25 °C
TJ = 125 °C
Electrical Specifications
(1) Pulse Width < 300μs, Duty Cycle <2%
VR = rated VR
Part number 12CWQ10FN
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Voltage Ratings
100
Parameters 12CWQ... Units Conditions
Parameters 12CWQ... Units Conditions
IF(AV) Max. Average Forward (Per Leg) 6 A 50% duty cycle @ TC = 135°C, rectangular wave form
Current * See Fig. 5 (Per Device) 12
IFSM Max. Peak One Cycle Non-Repetitive 33 0 5 μs Sine or 3μs Rect. pulse
Surge Current * See Fig. 7(Per Leg) 110 10ms Sine or 6ms Rect. pulse
EAS Non-Repetit. Avalanche Energy (Per Leg) 6 m J T J = 25 °C, IAS
= 1 Amps, L = 12 mH
IAR Repetitive Avalanche Current(Per Leg) 1 A Current decaying linearly to zero in 1 μsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Absolute Maximum Ratings
Following any rated
load condition and with
rated VRRM applied
A
< thermal runaway condition for a diode on its own heatsink
(*) dPtot 1
dTj Rth( j-a)
Parameters 12CWQ... Units Conditions
Document Number: 93218
www.vishay.com
2
12CWQ10FN
Bulletin PD-20548 rev. I 05/06
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage (Per Leg)
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
Fig. 1 - Max. Forward Voltage Drop Characteristics
(Per Leg)
0.0001
0.001
0.01
0.1
1
10
100
0 102030405060708090100
R
R
125°C
100°C
75°C
50°C
25°C
Reverse Volta ge - V (V)
Re v e rse C u rr e n t - I ( m A )
T = 150°C
J
10
100
1000
020406080100
T = 2 5 ° C
J
R
T
Junction Capacitance - C (pF)
Reverse Voltage - V (V)
0.01
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1 1
thJC
t , Rec ta ngula r Pulse Dura tio n (Second s)
Single Pulse
( Th e rm a l Re si st a n c e )
1
Thermal Impedance Z (°C/W)
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
Notes:
1. Duty fact or D = t / t
2. Pea k T = P x Z + T
J
DM
thJC C
12
2
t
1
t
P
DM
1
10
100
1000
00.511.522.533.5
In st a n t a n e o u s Fo rw a rd C u r re n t - I ( A)
F
FM
Forwa rd Voltag e Drop - V (V)
T = 150°C
T = 125°C
T = 25°C
J
J
J
Document Number: 93218
www.vishay.com
3
12CWQ10FN
Bulletin PD-20548 rev. I 05/06
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics
(Per Leg)
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC
;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1
= 80% rated VR
120
125
130
135
140
145
150
0123456789
DC
Allowable Case Temperature - (°C)
F( A V )
se e note (2)
Sq ua re wave (D = 0.50)
80% Rated V applied
R
Average Forward Current - I (A)
0
1
2
3
4
5
6
0123456789
DC
Average Power Loss - (Watts)
F( A V )
RM S Li m i t
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
Average Forward Current - I (A)
100
1000
10 100 1000 10000
FSM
Non-Repetitive Surge Curre nt - I (A)
p
At Any Rated Load Condition
And With Rated V Ap plied
Fo llo wing Surg e
RRM
Square Wave Pulse Duration - t (microsec )
Document Number: 93218
www.vishay.com
4
12CWQ10FN
Bulletin PD-20548 rev. I 05/06
LOT CODE 8024
ASSEMBLED ON WW 02, 2000
INTERNATIONAL
ASSEMBLY
LOT CODE
LOGO
RECTIFIER
WEEK 02
YEAR 0 = 2000
DATE CODE
X = SITE ID
PART NUMBER
THIS IS A 12CWQ10FN
12CWQ10FN
Part Marking Information
Outline Table
Modified JEDEC outline TO-252AA
Dimensions in millimeters and (inches)
Document Number: 93218
www.vishay.com
5
12CWQ10FN
Bulletin PD-20548 rev. I 05/06
Tape & Reel Information
TR
FEED DIRECTION
4.1 (0.16)
3.9 (0.15)
2.1 (0.83)
1.9 (0.07)
12.1 (0.48)
1.65 (0.06)
1.85 (0.07)
1.65 (0.06)
7.4 (0.29)
2.6 (0.10)
1.5 (0.06)
7.6 (0.30)
11.9 (0.47)
1.85 (0.07)
TO-252AA Tape & Reel
When ordering, indicate the part
number, part orientation, and the
quantity. Quantities are in multiples
of 2,000 pieces per reel for TR and
multiples of 3,000 pieces per reel
for both TRL and TRR.
13 (0.52) DIA.
DIA. MAX.
375 (14.17) 50 (1.97) DIA.
22.4 (0.88)
0.35 (0.01)
16.3 (0.64)
15.7 (0.62)
2.75 (0.11)
2.55 (0.10)
0.25 (0.01)
6.8 (0.26)
7.0 (0.28)
TRR
FEED DIRECTION
4.1 (0.16)
3.9 (0.15)
2.1 (0.83)
1.9 (0.07)
8.1 (0.32)
1.85 (0.07)
1.65 (0.06)
1.85 (0.07)
1.65 (0.06)
7.4 (0.29)
2.6 (0.10)
1.5 (0.06)
7.6 (0.30)
7.9 (0.31)
0.35 (0.01)
16.3 (0.64)
15.7 (0.62)
2.75 (0.11)
2.55 (0.10)
0.25 (0.01)
10.4 (0.41)
10.6 (0.42)
DIA.
TRL
FEED DIRECTION
4.1 (0.16)
3.9 (0.15)
2.1 (0.83)
1.9 (0.07)
8.1 (0.32)
1.85 (0.07)
1.65 (0.06)
1.85 (0.07)
1.65 (0.06)
7.4 (0.29)
2.6 (0.10)
1.5 (0.06)
7.6 (0.30)
7.9 (0.31)
0.35 (0.01)
16.3 (0.64)
15.7 (0.62)
2.75 (0.11)
2.55 (0.10)
0.25 (0.01)
10.4 (0.41)
10.6 (0.42)
DIA.
DIA.
DIA.
DIA.
DIA.
Document Number: 93218
www.vishay.com
6
12CWQ10FN
Bulletin PD-20548 rev. I 05/06
Ordering Information Table
12 C W Q 10 FN TRL -
Device Code
15
2 4
36
1- Current Rating (12A)
2- Center Tap Configuration-
3- Package Identifier
4W = D-Pak
4- Schottky "Q" Series
5- Voltage Rating (10 = 100V)
6- FN = TO-252AA
7-y none = Tube (50 pieces)
y TR = Tape & Reel
y TRL = Tape & Reel (Left Oriented)
y TRR = Tape & Reel (Right Oriented)
8-y none = Standard Production
y PbF = Lead-Free
7 8
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
05/06
Data and specifications subject to change without notice.
This product has been designed and qualified for AEC Q101 Level.
Qualification Standards can be found on IR's Web site.
Document Number: 93218
www.vishay.com
7
Legal Disclaimer Notice
Vishay
Document Number: 99901 www.vishay.com
Revision: 12-Mar-07 1
Notice
The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of
International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the
products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below.
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or
anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN®
are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product
names noted herein may be trademarks of their respective owners.
