MC Energy Series BOOSTCAP(R) Ultracapacitors e > Series: MC Energy Round, Terminal Type Low Internal Resistance High Energy Availability Low Time Constant Features: 2.7 Volt Operating Voltage Over 1 million duty cycles Lowest cost available Low internal resistance High energy density Threaded terminal or weldable post versions > Applications: Renewable energy Industrial UPS Power quality Telecommunications Consumer electronics > Overview: The Energy-type ultracapacitor product line gives industrial customers a much wider range of choices to meet their energy storage and power delivery requirements. The cells are specifically engineered to provide costeffective solutions for UPS, telecommunications and other lighter duty industrial electronics applications. In addition to meeting or exceeding demanding industrial application requirements for both watt-hours of energy storage and watts of power delivery per kilogram, all of these products will perform reliably for more than one million discharge-recharge cycles. The proprietary architecture and material science of the BOOSTCAP(R) products enable continued leadership in controlling costs, flexibility in product offerings and allow application specific performance tailoring. The cells operate at 2.7 volts, enabling them to store more energy and deliver more power per unit volume than any other commercially available ultracapacitor products. MC Energy Series BOOSTCAP(R) Ultracapacitors | Page 1 | Doc. # 1009323 | Rev. 8 | MC Energy Series BOOSTCAP(R) Ultracapacitors > MC Energy Series Specifications: Item Performance Operating Temperature Range -40 C to +65 C Storage Temperature Range -40 C to +70 C Rated Voltage 2.7 V DC Capacitance Tolerance +20% Resistance Tolerance Max. Temperature Characteristics Capacitance Change Within 5% of initial measured value at 25 C ( at -40 C) Internal Resistance Within 150% of initial measured value at 25 C (at -40 C) After 1500 hours application of rated voltage at 65 C Endurance Shelf Life Capacitance Change Within 20% of initial specified value Internal Resistance Within 60% of initial specified value After 1500 hours storage at 65 C without load shall meet specification for endurance After 10 years at rated voltage and 25 C Life Test Cycle Test Vibration Standard > Within 30% of initial specified value Internal Resistance Within 150% of initial specified value Capacitors cycled between specified voltage and half rated voltage under constant current at 25 C (1 million) Capacitance Change Within 30% of initial specified value Internal Resistance Within 150% of initial specified value SAEJ2380 MC Energy Product Specifications: Capacitance (F) ESR, DC (mohm) ESR, 1khz (mohm) Ic (mA) BCAP0650 E270 650 1.15 0.80 1.5 BCAP1200 E270 1200 0.79 0.56 2.7 BCAP1500 E270 1500 0.63 0.43 3.0 BCAP2000 E270 2000 0.46 0.35 4.2 BCAP3000 E270 3000 0.37 0.30 5.2 Part Number > Capacitance Change MC Energy Product Properties: Rth (C/W) Isc (A) Emax (Wh/kg) Pmax (W/kg) Pd (W/kg) BCAP0650 E270 6.5 3500 3.29 11,300 3,800 BCAP1200 E270 5.3 3750 4.05 10,800 3,600 BCAP1500 E270 4.5 3900 4.75 13,200 4,300 BCAP2000 E270 3.8 4300 5.06 13,000 4,700 BCAP3000 E270 3.2 4800 5.52 11,000 4,200 Maxwell Part No. MC Energy Series BOOSTCAP(R) Ultracapacitors | Page 2 | Doc. # 1009323 | Rev. 8 | MC Energy Series BOOSTCAP(R) Ultracapacitors > Dimensions: H L H 25 D2 O 22.4 .125 Vol (I) Part Number Post Version M12 x 1.75 Mass (kg) M12 x 1.75 Size (mm) L H D1 D2 (0.5mm) (0.2mm) (0.7mm) BCAP0650 E270 T04 BCAP1200 E270 T04 BCAP1500 E270 T04 BCAP2000 E270 T04 0.211 0.294 0.325 0.373 0.20 0.30 0.32 0.40 51.5 0.5 74.0 0.3 85.0 0.3 102.0 0.3 14.0 14.0 14.0 14.0 60.4 60.4 60.4 60.4 60.7 60.7 60.7 60.7 BCAP3000 E270 T04 0.475 0.55 138.0 0.3 14.0 60.4 60.7 H 2x O 14 0.013 D1 L H 25 D2 O 22.4 .125 Part Number BCAP0650 E270 T05 BCAP1200 E270 T05 BCAP1500 E270 T05 BCAP2000 E270 T05 BCAP3000 E270 T05 Vol (I) 0.150 0.233 0.264 0.312 0.414 Weldable Version O 14 0.013 Mass (kg) 0.20 0.30 0.32 0.40 0.55 O 14 0.013 D1 Size (mm) L 51.5 0.5 74.0 0.3 85.0 0.3 102.0 0.3 138.0 0.3 H D1 D2 (0.125mm) (0.2mm) (0.7mm) 3.18 3.18 3.18 3.18 3.18 60.4 60.4 60.4 60.4 60.4 60.7 60.7 60.7 60.7 60.7 Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. Worldwide Headquarters European Office Maxwell Technologies 9244 Balboa Avenue * San Diego, 92123 CA, USA PHONE: +(1) 858 503 3300 FAX: +(1) 858 503 3301 EMAIL: info@maxwell.com Maxwell Technologies SA CH-1728 Rossens * Switzerland PHONE: +41 (0) 26 411 85 00 FAX: +41 (0) 26 411 85 05 EMAIL: info@maxwell.com MC Energy Series BOOSTCAP(R) Ultracapacitors www.maxwell.com | Page 3 | Doc. # 1009323 | Rev. 8 | MC Energy Series BOOSTCAP(R) Ultracapacitors > Mounting Requirements: Do not reverse polarity. Maximum torque for M12 screw terminals is 10Nm. Cells are designed to be connected into series or parallel strings. Clean terminals so each are free of external contaminants and oxidation before mounting. Do not mount cells in excessive axial tension or compression. Do not apply bending torque to terminals of cells or on cell body during module assembly. Avoid module configurations that apply static or dynamic bending forces on the terminals or body of the cell. When mounting cells horizontally support the cell body along its length in multiple locations. > Markings: Capacitors are marked with the following information - Rated capacitance and rated voltage as well as energy/power type indication in the product naming. Serial number, name of manufacturer, positive and negative terminal, warning marking. > Additional Technical Information: Capacitance and ESR, DC measured per document 1007239 Ic= Leakage current after 72 hours, 25C Rth = Thermal resistance Emax = CV 2 1/2 3600 x mass lsc = short circuit current (maximum peak current) V2 Pmax = 4R (1khz) mass 0.12V 2 Pd = R (DC) mass U.S. PATENT NOs. 6,631,074, 6,643,119, 6,804,108, 6,813,139, 6,842,330, 7,090,946, 7,295,423, OTHER PATENTS PENDING Disclaimer of Warranty/Limitation of Liability for Uses in Life Support Devices or Critical Systems Maxwell Technologies, Inc. and its Affiliates ("Maxwell") provide no warranties of any kind either express or implied, including (without limitation) the implied warranties of merchantability and fitness, for uses of its products as components in life support devices or critical systems. "Life support devices" are devices or systems, which (a) are intended for surgical implant into a living body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with the instructions provided in the labeling can be reasonably expected to result in bodily injury to the user. An example of a life support device includes, but is not limited to, a heart pacemaker. A "critical system" is any system whose failure to perform can affect the safety or effectiveness of a higher level system, or cause bodily or property injury by loss of control of the higher level device or system. An example of a critical system includes, but is not limited to, aircraft avionics. Maxwell will not be liable to you for any loss or damages, either actual or consequential, indirect, punitive, special, or incidental, arising out of or relating to these terms. Worldwide Headquarters European Office Maxwell Technologies 9244 Balboa Avenue * San Diego, 92123 CA, USA PHONE: +(1) 858 503 3300 FAX: +(1) 858 503 3301 EMAIL: info@maxwell.com Maxwell Technologies SA CH-1728 Rossens * Switzerland PHONE: +41 (0) 26 411 85 00 FAX: +41 (0) 26 411 85 05 EMAIL: info@maxwell.com MC Energy Series BOOSTCAP(R) Ultracapacitors www.maxwell.com | Page 4 | Doc. # 1009323 | Rev. 8 |