Slotted Optical Switch OPB847, OPB848 Features: * Non-contact switching * Apertured for high resolution Product Photo Here * Hermetically sealed components Description: The OPB847 and OPB848 consists of a gallium aluminum arsenide LED and a silicon phototransistor, which is soldered into a printed PCBoard and mounted in a high-temperature plastic housing on opposite sides of a 0.100 inch (2.540 mm) wide slot. Both device types have a .025 (0.635mm) inch by .060 inch (1.524 mm) aperture in front of the phototransistor for high resolution positioning sensing. Phototransistor switching takes place when an opaque object passes through the slot. Applications: * * * * * Non-contact interruptive object sensing Assembly line automation LED Peak Part Number Wavelength Sensor Slot Width / Aperture Lead Length / Depth Emitter/Sensor Spacing OPB847 Machine automation 890 nm Equipment security Transistor 0.100" / 0.250" 0.025" / 0.025" 0.425" / 0.300" OPB848 Machine safety 1 4 2 3 Pin # Description 1 Anode 2 Cathode 3 Emitter 4 Collector [ MILLIMETERS] DIMENSIONS ARE IN: INCHES RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 7/09 Page 1 of 3 Slotted Optical Switch OPB847, OPB848 Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Operating and Storage Temperature Range -40 C to +85 C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] 240 C Input Diode Forward DC Current 50 mA Reverse Voltage Power Dissipation 2.0 V (2) 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 7V Power Dissipation (2) 100 mW Electrical Characteristics (TA = 25 C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 1.00 1.35 1.70 1.20 1.55 1.90 1.80 1.20 1.60 - 0.10 100 A VR = 2 V Input Diode (4) Forward Voltage VF Reverse Current IR IF = 20 mA V IF = 20 mA, TA = -55 C IF = 20 mA, TA = 100 C Output Phototransistor V(BR)CEO Collector-Emitter Breakdown Voltage 30 110 - V IC = 100 A, IF = 0 V(BR)ECO Emitter-Collector Breakdown Voltage 5 10 - V IE = 100 A, IF = 0 - 0.20 100 nA VCE = 10 V, IF = 0 - 10 100 A VCE = 10 V, IF = 0, TA = 100 C ICEO Notes: (1) (2) (3) (4) Collector-Emitter Dark Current Duration can be extended to 10 seconds maximum when flow soldering. Derate linearly 1.00 mW/ C above 25 C. Methanol and isopropanol are recommended as cleaning agents. Measurement is taken during the last 500 s of a single 1.0 ms test pulse. Heating due to increased pulse rate or pulse width can cause change in measurement results. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 7/09 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Slotted Optical Switch OPB847, OPB848 Electrical Characteristics (TA = 25 C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 4.0 1.0 - - mA VCE = 10 V, IF = 20 mA VCE = 10 V, IF = 20 mA 0.30 0.30 0.40 0.40 V IC = 2 mA, IF = 20 mA IC = 500 A, IF = 20 mA s VCC = 10 V, IF = 20 mA, RL = 1000 Combined IC(ON) VCE(SAT) On-State Collector Current (1) OPB847 OPB848 Collector-Emitter Saturation Voltage OPB847 OPB848 tr Output Rise Time OPB847 OPB848 12 8 20 15 tf Output Fall Time OPB847 OPB848 12 8 20 15 Notes: (1) Measurement is taken during the last 500 s of a single 1.0 ms test pulse. Heating due to increased pulse rate or pulse width can cause change in measurement results. OPB847 - Flag Next to Sensor 1.20 1.00 1.00 Typical I C(ON) Response (mA) Typical I C(ON) Response (mA) OPB847 - Flag Next to Emitter 1.20 0.80 0.60 0.40 0.80 0.60 0.40 Right to Left Right to Left Left to Right Top to Bottom 0.20 0.20 0.00 0.00 0.00 Left to Right Top to Bottom 0.05 0.10 0.15 0.20 0.00 0.25 Displacement Distance (inches) 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPB847 - Flag in Middle of Slot 1.20 Typical I C(ON) Response (mA) 1.00 0.80 0.60 0.40 Right to Left Left to Right Top to Bottom 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 7/09 Page 3 of 3