PVZ2A202A01B00 - MuRata Manufacturing Co., Ltd.

Cat.No.R50E-13

Murata

Manufacturing Co., Ltd.

Trimmer Potentiometers

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

CONTENTS
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Recycled Paper
1
2
3
4
5
6
7
8
9
Part Numbering 2
Selection Guide of Trimmer Potentiometers 4
SMD Open Type 2mm Size PVZ2 Series 5
PVZ2 Series Notice 7
SMD Open Type 3mm Size PVZ3/PVS3/PVA3 Series   9
PVZ3/PVS3/PVA3 Series Notice 16
SMD Sealed Type 2mm Size PVF2 Series 19
PVF2 Series Notice 21
SMD Sealed Type 3mm Size PVG3 Series  23
PVG3 Series Notice 26
SMD Sealed Type 4mm Size PVM4 Series 28
PVM4 Series Notice 31
SMD Sealed Type Multi-turns PVG5/PV01 Series 33
PVG5/PV01 Series Notice 39
Lead Sealed Type Single-turn PVC6/PV32/PV34 Series 41
PVC6/PV32/PV34 Series Notice 52
Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series 54
PV12/PV37/PV23/PV22/PV36 Series Notice 71
Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series 73
PVS1 Series Notice 75
SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods
77
SMD Sealed Type/Lead Sealed Type Specifications and Test Methods 79
Angle Sensing Potentiometer Specifications and Test Methods 82
Packaging 83
Recommended Adjustment Tools/Qualified Standards 88
1
2
3
4
5
6
7
8
9
• The RoHS compliance means that we judge from EU Directive 2002/95/EC the products do not contain lead, cadmium, mercury, hexavalent 
chromium, PBB and PBDE,  except exemptions stated in EU Directive 2002/95/EC annex and impurities existing in natural world.
• This statement does not insure the complaince of any of the listed parts with any laws or legal imperatives developed by any EU members 
individually with regards to the RoHS Directive.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. 
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note R50E13.pdf 04.6.11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

2

o Part Numbering

Standard Type (Resistance Change

Characteristics : Linear)

Standard Type (Resistance Change

Characteristics : Log curve)

Standard Type (Resistance Change

Characteristics : Log curve)

Standard Type (Resistance Change

Characteristics : Log-log curve)

Standard Type (Resistance Change

Characteristics : Log-log curve)

qProduct ID

Trimmer Potentiometers

PV Trimmer Potentiometers

Product ID

(Part Number)

wSeries

eAdjustment Direction /Lead Type

Code Series Code Adjustment Direction/

Lead Type

Z2 SMD Open 2mm Size A

K

Top

Rear

Z3

S3

G3

A3

F2

M4

01

C6

G5

SMD Open 3mm Size

SMD Sealed 4mm Size

SMD Sealed 6mm Square

12-turns

32

Lead Sealed 6mm Round

Single-turn

34

Lead Sealed 9mm Square

Single-turn

12

Lead Sealed 7mm Round

4-turns

Lead Sealed 6mm Square

Single-turn

SMD Sealed 5mm Square

11-turns

SMD Sealed 3mm Size

SMD Sealed type 2mm Size

SMD Open 3mm Size

Stopper Low-profile

A

H

P

W

X

A

D

E

G

H

M

Q

H

P

R

N

T

S

F

P

H

X

W

H

P

T

S

G

K

A

Top

Side

Top

Side

Top, Triangle

Side, Triangle

Top, Inline

Side, Inline

Top, Triangle

Top, Inline

Side, Triangle

Top, Triangle

Side, Triangle

Side, Inline

Top, Triangle

Side, Triangle

Top, J-hook

Top, Gull-wing

Rear

Top

KRear

RRear

23

36

37

Lead Sealed 19mm

Rectangular 15-turns

Lead Sealed 10mm Square

25-turns

Lead Sealed 6mm Square

12-turns

P

Y

W

Y

P

X

Z

W

Y

P

X

Z

Side, Triangle

Top, Inline

Top, Triangle

Side, Triangle

Side, Inline

Side, Triangle

Top, Triangle

Top, Inline

Side, Triangle

Side, Inline

tIndividual Specification

A01

C01

A04

C01

E01

D01

C31

C04

A11

A41

A81

A51

A91

Code Series Individual Specification Code

Standard Type

Ultra-thin Type

High-heat Resistance Type (for Top Adjustment)

High-heat Resistance Type (for Rear Adjustment)

High-liability Type

Radial Taping



PVZ2

PVZ3

PVM4

PV36/PV37

PVC6

PVF2

rTotal Resistance

Expressed by three figures. The unit is ohm. The first and second

figures are significant digits, and the third figure expresses the

number of zeros which follow the two figures.

100

102

104

Ex.)

10ohm

1000ohm

100000ohm (=100kohm)

Code Total Resistance

yPackaging

Ammo Pack

Bulk

Magazine

Reel

Code Packaging

YSide, Triangle

SSide, Inline

LSide

Lead Sealed

31mm Rectangular

22-turns

22

A00

B00

M00*

R00

* M12 for PV36P Type and M15 for PV36W/Y/X/Z Type.

y

R00

e

A

t

A01

r

103

PV

qw

Z3

PVZ2/PVZ3/PVS3/

PVA3/PV32/PV12

PVG3/PVM4/PVG5/PV01/

PVC6/PV34/PV22/PV23/

PV36/PV37

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

3

qProduct ID

Angle Sensing Potentiometers

(Part Number)

wSeries

eTerminal Shape

tIndividual Specification Code

rTotal Resistance

Expressed by three figures. The unit is ohm. The first and second

figures are significant digits, and the third figure expresses the

number of zeros which follow the two figures.

Ex.)

yPackaging

y

R00

e

A

t

A01

r

103

PV

qw

S1

Product ID

PV Trimmer Potentiometers

(Rotary Position Sensor)

Code Series

S1 Dust-proof Type 12mm Size

Code Terminal Shape

ASMD Type

LLead Type

Code Total Resistance

103 10000 ohm (=10k ohm)

Code Individual Specification Code

A01 SMD Type Standard

A03 Lead Type Standard

Code Packaging

B00 Bulk

R00 Reel

T00 Tray

qProduct ID

∗ PVS1 Series will be changed to new part number since Oct. 1, 2004. Details is as follows.

(Part Number)

wSeries

eTerminal Shape

tRotor Hole Shape/Rotor Hole Size

rTotal Resistance

Expressed by three figures. The unit is ohm. The first and second

figures are significant digits, and the third figure expresses the

number of zeros which follow the two figures.

Ex.)

uPackaging

u

R00

e

A

y

A01

r

103

SV

q

AE

t

w

01

Product ID

SV Rotary Position Sensor

Code Series

01 Carbon Rotary Position Sensor

Code Terminal Shape

ASMD Type

LLead Type

Code Total Resistance

103 10000 ohm (=10k ohm)

Code Rotor Hole Shape/Rotor Hole Size

AD D Hole/3.5mm Dia.

AE D Hole/4.0mm Dia.

CE T Hole/4.0mm Dia.

yIndividual Specification Code

Code Individual Specification Code

A01 SMD Type Standard

A03 Lead Type Standard

Code Packaging

B00 Bulk

R00 Reel

T00 Tray

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

4

PVA3

PVM4

PVG5

PV12H/P

PV37W/Y

PV12T/S

PV37P/X/Z

PV23P/Y

PV36W/Y PV36P/X/Z

for A utomatic Adjustment

with Rotational Stop

PVS3

Low Height

(0.85mm max.)

PVZ2A_A04

(1.0mm max.)

PVZ2A_A01

Rear Adjustment

PVZ2K

with Rotational Stop

PVF2

for A utomatic Adjustment

with Rotational Stop

PVG3A

with Rotational Stop

PVG3G

Rear Adjustment

with Rotational Stop

PVG3K

with Rotational Stop

PVC6A/D/M

with Rotational Stop

PVC6E/G/H/Q

for A utomatic Adjustment

PVZ3A

Rear Adjustment

PVZ3K

Rear Adjustment

Low profile (1.5mm max.)

PVZ3R

3mm size

Single Turn

2mm size

Single Turn

2mm size

Single Turn

3mm size

Single Turn

3mm size

Single Turn

4mm size

Single Turn

5mm size

11 Turns

6mm size Single Turn

7mm size

4 Turns

6mm size

12 Turns

6mm size

Single Turn

7mm size

4 Turns

6mm size

12 Turns

19mm size

15 Turns

10mm size

25 Turns

10mm size

25 Turns

Start

Mounting Method

Construction Adjustment

Surface Mount PCB Insertion

Sealed Construction

Top Side

Resistive Element Resistive Element

Cermet Resistive Element

SealedOpen

Carbon Cermet Carbon Cermet

Selection Guide of Trimmer Potentiometers

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

5

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

SMD Open Type 2mm Size PVZ2 Series

■ Features

1. Ultra-small and thin external dimensions of

2.1(W)x2.7(L)x0.85 max. (T)mm.

(PVZ2A_A04 Series)

2. Au plated termination achieves a high density

P.C.B. mounting.

3. Cross-shaped driver slot allows for in-process

automatic adjustment and it provides superior

adjustability.

4. Two-piece parts construction achieves low cost and

excellent quality.

5. Special resin substrate allows high peak temperature

for reflow soldering.

■ Applications

1. Pick-up module 2. LCD

3. Cellular-phone 4. PHS

5. Pager 6. DVC

7. Digital camera 8. Portable audio, etc.

2.1 ∗2

0.5

0.4

0.45±0.1

0.8 2.4 Dia.

1.3

2.2

2.7±0.3

#2

0.7

#1 #3

∗1

∗1 Driver Plate Rotation Area :

Please do not place any components

more than 0.7mm in height within this area.

∗2 PVZ2A_A01 : 0.9±0.1

PVZ2A_A04 : 0.8±0.05

0.55 0.55

0.50.5

4

1

Soldering Part

in mm

(

Tolerance : ±0.2

)

#2

#1 #3

CLOCKWISE

PVZ2A

2.1 0.9+0.1

-

0.2

0.8

#2

#3

0.65

1.3

2.2

5.4

(1.0)

0.45±0.1

#1

0.65 0.6

2.4 Dia.

*1

∗1. Driver Plate Rotation Area :

Please do not place any components

more than 0.7mm in height within this area.

Soldering

Part

in mm

(

Tolerance : ±0.2

)

#2

#1 #3

CLOCKWISE

PVZ2K

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVZ2p501A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 500ohm ±30% ±500ppm/°C

PVZ2p102A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 1k ohm ±30% ±500ppm/°C

PVZ2p202A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 2k ohm ±30% ±500ppm/°C

PVZ2p302A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 3k ohm ±30% ±500ppm/°C

PVZ2p502A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 5k ohm ±30% ±500ppm/°C

PVZ2p103A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 10k ohm ±30% ±500ppm/°C

PVZ2p203A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 20k ohm ±30% ±500ppm/°C

PVZ2p303A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 30k ohm ±30% ±500ppm/°C

PVZ2p503A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 50k ohm ±30% ±500ppm/°C

PVZ2p104A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 100k ohm ±30% ±500ppm/°C

PVZ2p204A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 200k ohm ±30% ±500ppm/°C

PVZ2p304A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 300k ohm ±30% ±500ppm/°C

PVZ2p504A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 500k ohm ±30% ±500ppm/°C

PVZ2p105A01 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 1M ohm ±30% ±500ppm/°C

PVZ2p501A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 500ohm ±30% ±500ppm/°C

PVZ2p102A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 1k ohm ±30% ±500ppm/°C

PVZ2p202A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 2k ohm ±30% ±500ppm/°C

PVZ2p302A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 3k ohm ±30% ±500ppm/°C

PVZ2p502A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 5k ohm ±30% ±500ppm/°C

PVZ2p103A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 10k ohm ±30% ±500ppm/°C

PVZ2p203A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 20k ohm ±30% ±500ppm/°C

PVZ2p303A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 30k ohm ±30% ±500ppm/°C

PVZ2p503A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 50k ohm ±30% ±500ppm/°C

PVZ2p104A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 100k ohm ±30% ±500ppm/°C

PVZ2p204A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 200k ohm ±30% ±500ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

6

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PVZ2p304A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 300k ohm ±30% ±500ppm/°C

PVZ2p504A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 500k ohm ±30% ±500ppm/°C

PVZ2p105A04 0.1W(50°C) Reflow/Soldering Iron 1(240°±10°) 1M ohm ±30% ±500ppm/°C

The blank column is filled with the code of adjustment direction A (top) or K (rear).

■ Construction

PVZ2A

■ Standard Land Pattern

PVZ2A

0.9

0.6 0.60.7

1.55 1.55

0.85 0.85

in mm

(

Tolerance : ±0.1

)

■ Construction

PVZ2K

Driver Plate

Wiper

Resistive

Element

Resin Substrate

#2-Terminal

#3-Terminal

#1-Terminal

■ Standard Land Pattern

PVZ2K

0.9

3.4 Dia.

0.70.60.7

2.9 2.9

0.7

in mm

(

Tolerance : ±0.1

)

■ Characteristics Res. Change : +10, -2%

Res. Change : R

<

50kohm···+2, -10%

50kohm<R···+2, -15%

Res. Change : ±10%

Res. Change : R

<

50kohm···+2, -10%

50kohm<R···+2, -15%

Res. Change : ±5%

±500ppm/˚C

Res. Change : ±10% (10 cycles)

Humidity Exposure

High Temperature

Exposure

Humidity Load Life

Load Life

Temperature Cycle

Temperature Coefficient

of Resistance

Rotational Life

=

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVZ2 Series Notice

7

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

4. If the trimmer potentiometer is used in DC and high

humidity conditions, please connect wiper (#2) for

plus and resistive element (#1 or #3) for minus.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Reflow soldering and Soldering Iron are

available. Cannot be soldered using the flow

soldering method. If you use the flow soldering

method, the trimmer potentiometer may not

function.

(2) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(3) Standard soldering condition

(a) Reflow soldering :

Refer to the standard temperature profile.

(b) Soldering iron:

>Temperature of tip 360 deg. C max.

>Soldering time 3 sec. max.

>Diameter 1mm max.

>Wattage of iron 30W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature, the

trimmer potentiometer may deviate from the

specified characteristics.

(4) Apply the appropriate amount of solder paste.

The thickness of solder paste should be printed

from 100 micro m to 150 micro m and the

dimension of land pattern used should be Murata's

standard land pattern at reflow soldering.

Insufficient amounts of solder can lead to

insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

(5) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

2. Mounting

(1) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(2) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(3) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 1.5-1.8mm dia. and inner dimension

1.3mm dia.

3. Cleaning

(1) In case there is flux on the resistive element,

clean sufficiently with cleaning solvents and

completely remove all residual flux.

(2) Isopropyl-alcohol and Ethyl-alcohol are

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVZ2 Series Notice

8

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

applicable solvents for cleaning. If you use any

other types of solvents, please evaluate performance by your product.

■ Reflow Soldering Standard Profile

230

200

100

0

60-120 sec. 30 sec. max.

(Melting zone)

Time

Temperature (°C)

For reflow soldering

Pre-heating (in the air) Soldering

Gradual Cooling

(in the air)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdriver below.

* Recommended screwdriver for manual adjustment

PVZ2A_A01=Murata P/N : KMDR090

PVZ2A_A04=Murata P/N : KMDR150

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. Please use within the effective rotational angle.

The potentiometer does not have a mechanical stop

for over rotation. In cases out of effective

rotational angle, the trimmer potentiometer may

not function.

4. When using a lock paint to fix slot position,

please consult with a Murata factory representative

prior to using to prevent corrosion and contact

intermittence.

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

9

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

SMD Open Type 3mm Size PVZ3/PVS3/PVA3 Series

PVZ3 Series

■ Features

1. Excellent solderability characteristics are

achieved via special plating techniques on each

termination.

2. Specially designed substrate prevents wicking of

flux onto the top of the part body.

3. Funnel shaped adjustment slot allows for in-process

automatic adjustment.

4. High-heat resistance type is available

(PVZ3A_C01/PVZ3K_E01/PVZ3R_E01).

5. Enlarged bottom termination enhance soldering

strength while reducing the necessary land area

required promoting high-density PCB mounting.

6. Flat surface is provided for smooth pick and place

(PVZ3K only).

7. The standard position of driver plate is adjusted

at the center normally, but another position is

also available.

8. This product meets Pb-free.

■ Applications

1. Optical pick up 2. Cordless telephones

3. CD players 4. FDD

5. Motor 6. CD-ROMs

7. Car stereos 8. TFT-LCD TV sets

9. Headphone stereos

#2

#1 #3

CLOCKWISE

#1

#2

#3

3.1

1.0

0.75 1.0 0.75

2.4±0.1

3.2

3.6

0.5±0.1

1.15 Dia.

2.2 Dia.

3.0 Dia.

1.85±0.1

0.25±0.1 0.1max.

0.70.7

in mm

(

Tolerance : ±0.3

)

PVZ3A

#1#3

3.1 1.85±0.1

2.1

0.25±0.1

3.2

0.5±0.1

5.4

4.4

2.4±0.1

#2

0.85

1.1

0.9

0.85

1.15 Dia.

3.0 Dia.

2.2 Dia.

Soldering part

#2 (Wiper Contact)

#1 #3

CIRCUIT

CLOCKWISE

(

in mm

)

Tolerance : ±0.3

PVZ3K

#1#3

3.1 1.4±0.1 0.5±0.1

3.2

0.5±0.1

0.50.5

5.8

2.4±0.1

#2

0.85

1.1

0.9

0.85

1.15 Dia.

3.0 Dia.

2.2 Dia.

Soldering part

#2 (Wiper Contact)

#1 #3

CIRCUIT

CLOCKWISE

(

in mm

)

Tolerance : ±0.3

PVZ3R

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVZ3A201p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 200ohm ±30% ±500ppm/°C

PVZ3A301p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 300ohm ±30% ±500ppm/°C

PVZ3A501p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 500ohm ±30% ±500ppm/°C

PVZ3A102p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 1k ohm ±30% ±500ppm/°C

PVZ3A202p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 2k ohm ±30% ±500ppm/°C

PVZ3A302p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 3k ohm ±30% ±500ppm/°C

PVZ3A502p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 5k ohm ±30% ±500ppm/°C

PVZ3A103p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 10k ohm ±30% ±500ppm/°C

PVZ3A203p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 20k ohm ±30% ±500ppm/°C

PVZ3A303p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 30k ohm ±30% ±500ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

10

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PVZ3A503p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 50k ohm ±30% ±500ppm/°C

PVZ3A104p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 100k ohm ±30% ±500ppm/°C

PVZ3A204p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 200k ohm ±30% ±500ppm/°C

PVZ3A304p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 300k ohm ±30% ±500ppm/°C

PVZ3A504p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 500k ohm ±30% ±500ppm/°C

PVZ3A105p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 1M ohm ±30% ±500ppm/°C

PVZ3A205p0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 2M ohm ±30% ±500ppm/°C

PVZ3K201E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 200ohm ±30% ±500ppm/°C

PVZ3K301E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 300ohm ±30% ±500ppm/°C

PVZ3K501E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 500ohm ±30% ±500ppm/°C

PVZ3K102E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 1k ohm ±30% ±500ppm/°C

PVZ3K202E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 2k ohm ±30% ±500ppm/°C

PVZ3K302E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 3k ohm ±30% ±500ppm/°C

PVZ3K502E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 5k ohm ±30% ±500ppm/°C

PVZ3K103E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 10k ohm ±30% ±500ppm/°C

PVZ3K203E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 20k ohm ±30% ±500ppm/°C

PVZ3K303E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 30k ohm ±30% ±500ppm/°C

PVZ3K503E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 50k ohm ±30% ±500ppm/°C

PVZ3K104E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 100k ohm ±30% ±500ppm/°C

PVZ3K204E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 200k ohm ±30% ±500ppm/°C

PVZ3K304E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 300k ohm ±30% ±500ppm/°C

PVZ3K504E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 500k ohm ±30% ±500ppm/°C

PVZ3K105E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 1M ohm ±30% ±500ppm/°C

PVZ3K205E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 2M ohm ±30% ±500ppm/°C

PVZ3R201E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 200ohm ±30% ±500ppm/°C

PVZ3R301E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 300ohm ±30% ±500ppm/°C

PVZ3R501E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 500ohm ±30% ±500ppm/°C

PVZ3R102E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 1k ohm ±30% ±500ppm/°C

PVZ3R202E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 2k ohm ±30% ±500ppm/°C

PVZ3R302E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 3k ohm ±30% ±500ppm/°C

PVZ3R502E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 5k ohm ±30% ±500ppm/°C

PVZ3R103E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 10k ohm ±30% ±500ppm/°C

PVZ3R203E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 20k ohm ±30% ±500ppm/°C

PVZ3R303E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 30k ohm ±30% ±500ppm/°C

PVZ3R503E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 50k ohm ±30% ±500ppm/°C

PVZ3R104E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 100k ohm ±30% ±500ppm/°C

PVZ3R204E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 200k ohm ±30% ±500ppm/°C

PVZ3R304E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 300k ohm ±30% ±500ppm/°C

PVZ3R504E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 500k ohm ±30% ±500ppm/°C

PVZ3R105E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 1M ohm ±30% ±500ppm/°C

PVZ3R205E01 0.1W(50°C) Reflow/Soldering Iron 1(230°±10°) 2M ohm ±30% ±500ppm/°C

The blank column is filled with the code of individual specification A01 (standard type) and C01 (high-heat resistance type).

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

11

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Construction

PVZ3A

■ Standard Land Pattern

PVZ3A

1.1

0.9

1.91.9

0.9

1.0 0.7 1.0 in mm

(

Tolerance : ±0.1

)

■ Construction

PVZ3K Driver Plate

Wiper

Resistive Element

(Carbon)

Resin Substrate

#2-Terminal

#3-Terminal

#1-Terminal

■ Standard Land Pattern

PVZ3K

1.5

1.04.01.0

0.5

3.0

3.0 Dia

in mm

(

Tolerance : ±0.1

)

■ Construction

PVZ3R

Driver Plate

Wiper

Resistive Element

(Carbon)

Resin Substrate

#2-Terminal

#3-Terminal

#1-Terminal

■ Standard Land Pattern

PVZ3R

1.25

4.0 Dia.

1.25

3.0

1.5

0.70.7

3.13.1

in mm

(

Tolerance : ±0.1

)

■ Characteristics Res. Change : +10, -2%

Res. Change : R

<

100kohm···+2, -10%

100kohm<R···+2, -15%

Res. Change : ±10%

Res. Change : R

<

100kohm···+2, -10%

100kohm<R···+2, -15%

Res. Change : ±5%

±500ppm/˚C

Res. Change : ±10% (10 cycles)

Humidity Exposure

High Temperature

Exposure

Humidity Load Life

Load Life

Temperature Cycle

Temperature Coefficient

of Resistance

Rotational Life

=

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

12

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PVS3 Series

■ Features

1. Funnel shaped slot allows for in-process automatic

adjustment and it provides superior adjustability.

2. Easy insertion and operation of adjustment

screwdriver

3. Low profile of 1.5mm height with stopper

4. Plated termination achieves high resistance to

solder leaching.

5. Screwdrivers for adjustment are available on the

market.

■ Applications

1. Camcorders 2. Video disk players

3. TFT-LCD TV sets 4. Headphone stereos

5. Cordless telephones 6. Micro-motors

7. Optical cameras

1

2

3.9

1.0

2.3±0.1

3.0

1.25

1.5±0.1

3.0 Dia.

1.2 Dia.

0.5±0.1

1.1 #3

#1

#2

0.3±0.1

0.85

1.5

0.7 1.1 0.7

0.81.1

1.75

(0.3)

#2 (Wiper Contact)

#1#3

CLOCKWISE

CIRCUIT

∗1.Driver Plate Rotation Area:

Please do not place any components

more than 0.7mm in height within

this area.

Soldering part

4.1Dia.

in mm

(

Tolerance : ±0.3

)

∗1

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVS3A101A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 100ohm ±25% ±250ppm/°C

PVS3A201A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 200ohm ±25% ±250ppm/°C

PVS3A301A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 300ohm ±25% ±250ppm/°C

PVS3A501A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 500ohm ±25% ±250ppm/°C

PVS3A102A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 1k ohm ±25% ±250ppm/°C

PVS3A202A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 2k ohm ±25% ±250ppm/°C

PVS3A302A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 3k ohm ±25% ±250ppm/°C

PVS3A502A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 5k ohm ±25% ±250ppm/°C

PVS3A103A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 10k ohm ±25% ±250ppm/°C

PVS3A203A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 20k ohm ±25% ±250ppm/°C

PVS3A303A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 30k ohm ±25% ±250ppm/°C

PVS3A503A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 50k ohm ±25% ±250ppm/°C

PVS3A104A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 100k ohm ±25% ±250ppm/°C

PVS3A204A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 200k ohm ±25% ±250ppm/°C

PVS3A304A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 300k ohm ±25% ±250ppm/°C

PVS3A504A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 500k ohm ±25% ±250ppm/°C

PVS3A105A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 1M ohm ±25% ±250ppm/°C

PVS3A205A01 0.1W(70°C) Reflow/Soldering Iron 1(270°±10°) 2M ohm ±25% ±250ppm/°C

■ Construction

Driver Plate

Wiper

Stopper /

#2 Terminal

Resistive

Element

Ceramic

Substrate

#3 Terminal

#1 Terminal

Stopper

■ Standard Land Pattern

1.6

1.5

2.4 2.2

0.9

1.1 0.8 1.1 in mm

(

Tolerance : ±0.1

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

13

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Characteristics Res. Change : ±3%

Res. Change : ±3%

±250ppm/˚C

Res. Change : ±10% (10 cycles)

Humidity Exposure

High Temperature

Exposure

Humidity Load Life

Load Life

Temperature Cycle

Temperature Coefficient

of Resistance

Rotational Life

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

14

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PVA3 Series

■ Features

1. Funnel shaped slot allows for in-process automatic

adjustment and it provides superior adjustability.

2. Easy insertion and operation of adjustment

screwdriver

3. Plated termination achieves high resistance to

solder leaching.

4. Screwdrivers for adjustment are available on the

market.

5. Recommended for both reflow and flow soldering

method. (Need cleaning for flow soldering method)

■ Applications

1. Camcorders 2. Video disk players

3. TFT-LCD TV sets 4. Headphone stereos

5. Cordless telephones 6. Micro-motors

7. Optical cameras

#2

#1 #3

CLOCKWISE

#1

#2

#3

3.0

2.4±0.1

0.5±0.1

3.5

1.2 Dia.

0.7 1.1 0.7

3.0 Dia.

2.2 Dia. 1.85±0.1

0.3±0.1

1

4

0.7

90°

0.65

1.5

1.11.75

(0.3)

0.6

0.7

in mm

(

Tolerance : ±0.3

)

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVA3A101A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 100ohm ±25% ±250ppm/°C

PVA3A201A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 200ohm ±25% ±250ppm/°C

PVA3A301A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 300ohm ±25% ±250ppm/°C

PVA3A501A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 500ohm ±25% ±250ppm/°C

PVA3A102A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 1k ohm ±25% ±250ppm/°C

PVA3A202A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 2k ohm ±25% ±250ppm/°C

PVA3A302A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 3k ohm ±25% ±250ppm/°C

PVA3A502A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 5k ohm ±25% ±250ppm/°C

PVA3A103A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 10k ohm ±25% ±250ppm/°C

PVA3A203A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 20k ohm ±25% ±250ppm/°C

PVA3A303A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 30k ohm ±25% ±250ppm/°C

PVA3A503A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 50k ohm ±25% ±250ppm/°C

PVA3A104A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 100k ohm ±25% ±250ppm/°C

PVA3A204A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 200k ohm ±25% ±250ppm/°C

PVA3A304A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 300k ohm ±25% ±250ppm/°C

PVA3A504A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 500k ohm ±25% ±250ppm/°C

PVA3A105A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 1M ohm ±25% ±250ppm/°C

PVA3A205A01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(270°±10°) 2M ohm ±25% ±250ppm/°C

■ Construction ■ Standard Land Pattern

1.6

1.5

2.4 2.2

0.9

1.1 0.8 1.1 in mm

(

Tolerance : ±0.1

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

15

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Characteristics Res. Change : ±3%

Res. Change : ±3%

±250ppm/˚C

Res. Change : ±10% (10 cycles)

Humidity Exposure

High Temperature

Exposure

Humidity Load Life

Load Life

Temperature Cycle

Temperature Coefficient

of Resistance

Rotational Life

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVZ3/PVS3/PVA3 Series Notice

16

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

4. If the trimmer potentiometer is used in DC and high

humidity conditions, please connect wiper (#2) for

plus and resistive element (#1 or #3) for minus.

(PVZ3 Series only)

■ Notice (Soldering and Mounting)

1. Soldering

(1) Standard soldering condition

(a) Reflow soldering :

Refer to the standard temperature profile.

(b) Soldering iron:

*PVZ3A_A01 series

>Temperature of tip 260 deg. C max.

>Soldering time 3 sec. max.

>Diameter 2mm max.

>Wattage of iron 30W max.

*PVZ3A_C01, PVZ3K_E01, PVZ3R_E01 series

*PVS3, PVA3 series

>Temperature of tip 360 deg. C max.

>Soldering time 3 sec. max.

>Diameter 2mm max.

>Wattage of iron 30W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

(2) Flow soldering is available for PVA3 series.

For PVZ3 and PVS3, do not use flow

soldering method (dipping).

If you use the flow soldering method, the

trimmer potentiometer may not function.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

(4) Apply the appropriate amount of solder paste.

The thickness of solder paste should be printed

from 150 micro m to 200 micro m (PVZ3 series

should be printed from 100 micro m to 150 micro m)

and the dimension of land pattern used should be

Murata's standard land pattern at reflow

soldering. Insufficient amounts of solder can

lead to insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

2. Mounting

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(2) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVZ3/PVS3/PVA3 Series Notice

17

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

trimmer potentiometer from breakage.

(4) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 2.5-2.8mm dia. and inner dimension

2mm dia.

3. Cleaning

(1) In case there is flux on the resistive element,

clean sufficiently with cleaning solvents and

completely remove all residual flux.

(2) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please evaluate

performance by your product.

■ Flow Soldering Standard Profile

PVA3 Series Only

250

200

100

060-120 sec. 5 sec. max. Time

Temperature (°C)

For flow soldering

Pre-heating (in the air) Soldering Gradual Cooling

(in the air)

■ Reflow Soldering Standard Profile

PVA3/PVS3/PVZ3_A01 Series

230

200

100

0

60-120 sec. 30 sec. max.

(Melting zone)

Time

Temperature (°C)

For reflow soldering

Pre-heating (in the air) Soldering

Gradual Cooling

(in the air)

PVZ3_C01/E01 Series

For refllow soldering

Pre-heating (in the air)

60-120 sec. 30-40 sec. Time

Gradual cooling

(in the air)

Soldering

260

220

180

150

100

Temperature (°C)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdriver for manual adjustment

VESSEL MFG. : NO.9000+1.7x30

(Murata P/N : KMDR080)

TORAY MFG. : SA-2225

(Murata P/N : KMDR070)

* Recommended screwdriver for automatic

adjustment

TORAY MFG. : JB-2225

(Murata P/N : KMBT070)

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. For PVZ3 and PVA3 series, please use within the

effective rotational angle.

The potentiometer does not have a mechanical stop

for over rotation. In cases out of effective

rotational angle, the trimmer potentiometer may

not function.

4. When using a lock paint to fix slot position,

please consult with a Murata factory representative

prior to using to prevent corrosion and contact

intermittence.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVZ3/PVS3/PVA3 Series Notice

18

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

19

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

SMD Sealed Type 2mm Size PVF2 Series

■ Features

1. Ultra-compact size of "2x2x2.3mm"

2. A sealed structure prevents liquids (water,

cleaning liquid, sweat, etc.) from entering.

3. As for the resistance change characteristics, both

a log curve type and linear type are available.

4. A rotation service life of 100 cycles is quaranteed.

5. Can be automatically mounted using a chip placer,

as well as mounted using reflow soldering.

■ Applications

1. Hearing aids

2. Ultra-compact sensors or the like

3. Applications requiring ultra-compactness, and a

sealed structure

Marking 2.00

#2

#1 #3

1.6dia.

2.00

0.30

2.15max.

2.30±0.15

0.70±0.15

0.30±0.15

0.50

0.30 0.50

0.30

0.50

#2 (Wiper contact)

#1 #3

Clockwise

CIRCUIT in mm

(

Tolerance : ±0.10

)

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVF2A501A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 500ohm ±30% ±500ppm/°C

PVF2A102A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 1k ohm ±30% ±500ppm/°C

PVF2A202A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 2k ohm ±30% ±500ppm/°C

PVF2A502A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 5k ohm ±30% ±500ppm/°C

PVF2A103A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 10k ohm ±30% ±500ppm/°C

PVF2A203A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 20k ohm ±30% ±500ppm/°C

PVF2A503A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 50k ohm ±30% ±500ppm/°C

PVF2A104A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 100k ohm ±30% ±500ppm/°C

PVF2A204A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 200k ohm ±30% ±500ppm/°C

PVF2A504A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 500k ohm ±30% ±500ppm/°C

PVF2A105A11 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 1M ohm ±30% ±500ppm/°C

PVF2A102A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 1k ohm ±30% ±500ppm/°C

PVF2A202A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 2k ohm ±30% ±500ppm/°C

PVF2A502A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 5k ohm ±30% ±500ppm/°C

PVF2A103A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 10k ohm ±30% ±500ppm/°C

PVF2A203A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 20k ohm ±30% ±500ppm/°C

PVF2A503A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 50k ohm ±30% ±500ppm/°C

PVF2A104A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 100k ohm ±30% ±500ppm/°C

PVF2A204A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 200k ohm ±30% ±500ppm/°C

PVF2A504A41 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 500k ohm ±30% ±500ppm/°C

PVF2A102A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 1k ohm ±30% ±500ppm/°C

PVF2A202A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 2k ohm ±30% ±500ppm/°C

PVF2A502A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 5k ohm ±30% ±500ppm/°C

PVF2A103A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 10k ohm ±30% ±500ppm/°C

PVF2A203A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 20k ohm ±30% ±500ppm/°C

PVF2A503A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 50k ohm ±30% ±500ppm/°C

PVF2A104A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 100k ohm ±30% ±500ppm/°C

PVF2A204A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 200k ohm ±30% ±500ppm/°C

PVF2A504A51 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 500k ohm ±30% ±500ppm/°C

PVF2A102A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 1k ohm ±30% ±500ppm/°C

PVF2A202A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 2k ohm ±30% ±500ppm/°C

PVF2A502A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 5k ohm ±30% ±500ppm/°C

PVF2A103A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 10k ohm ±30% ±500ppm/°C

PVF2A203A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 20k ohm ±30% ±500ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

20

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PVF2A503A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 50k ohm ±30% ±500ppm/°C

PVF2A104A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 100k ohm ±30% ±500ppm/°C

PVF2A204A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 200k ohm ±30% ±500ppm/°C

PVF2A504A81 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 500k ohm ±30% ±500ppm/°C

PVF2A102A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 1k ohm ±30% ±500ppm/°C

PVF2A202A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 2k ohm ±30% ±500ppm/°C

PVF2A502A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 5k ohm ±30% ±500ppm/°C

PVF2A103A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 10k ohm ±30% ±500ppm/°C

PVF2A203A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 20k ohm ±30% ±500ppm/°C

PVF2A503A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 50k ohm ±30% ±500ppm/°C

PVF2A104A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 100k ohm ±30% ±500ppm/°C

PVF2A204A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 200k ohm ±30% ±500ppm/°C

PVF2A504A91 0.001W(50°C) Reflow/Soldering Iron 1(210°±10°) 500k ohm ±30% ±500ppm/°C

The last three digits express the individual specification codes for Resistant Curve. Please refer to Resistance Curve on the following page for characteristics.

■ Construction

O-ring

Rotor

Terminal

Shaft

Case

Substrate

Wiper

Resistive Element

■ Standard Land Pattern

0.60

0.900.90

2.20

0.60 0.60

0.40

in mm

(

Tolerance : ±0.10

)

■ Characteristics

Linear-log. curve (Measured from terminal 1 to 2)

100

90

80

70

60

50

40

30

20

10

00

#1 20 40 60 80 100

#3

Percent clockwise rotation

Percent resistance

A11

A81

A41

Linear-log. log. curve (Measured from terminal 2 to 3)

100

90

80

70

60

50

40

30

20

10

00

#1 20 40 60 80 100

#3

Percent clockwise rotation

Percent resistance

A11

A91

A51

∆TR ±5%

∆TR ±15, -2%

∆V.S.S. ±5%

∆TR +2, -10%

∆TR ±3%

∆TR ±10%

Temperature Cycle

Humidity

Vibration

Shock (100G)

Temperature Load Life

Low Temperature Exposure

Rotational Life (100 cycles) ∆TR: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

■ Resistance Curve

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVF2 Series Notice

21

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

4. If the trimmer potentiometer is used in DC and high

humidity conditions, please connect wiper (#2) for

plus and resistive element (#1 or #3) for minus.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Standard solder iron condition

(a) Reflow soldering:

Refer to the standard temperature profile.

(b) Sodering iron:

>Temperature of tip 260 deg. C max.

>Soldering time 3 sec. max.

>Diameter 1mm dia. max.

>Wattage of iron 30W max.

Before using other soldering conditions than

those listed above, please consult with a Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

(2) Use our standard land dimension. Excessive land

area causes displacement due to the effect of

the surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

(4) Cannot be soldered using the flow soldering

method. If you use the flow soldering method,

the trimmer potentiometer may not function.

2. Mounting

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of

the surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(2) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

>Power: 600W (67 liter) max.

>Frequency: 28kHz

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVF2 Series Notice

22

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

cleaning compatibility usually depends on the

jig construction and/or the cleaning condition

such as the depth of immersion, please check

the cleaning equipment to determine the suitable

conditions.

If the trimmer potentiometer is cleaned by

other conditions, the trimmer potentiometer may

be damaged.

■ Reflow Soldering Standard Profile

230

200

100

0

60-120 sec. 30 sec. max.

(Melting zone)

Time

Temperature (°C)

For reflow soldering

Pre-heating (in the air) Soldering

Gradual Cooling

(in the air)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot.

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. The rotational torque at the position of the

adjustment range should not exceed the stop

strength.

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

23

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

SMD Sealed Type 3mm Size PVG3 Series

■ Features

1. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

2. Driver plate with cross-slot is suitable for

automatic adjustment.

3. Rotor with large diameter and deep groove improves

driver insertion.

4. J-hook, Gull wing terminal shape. Rear and through

hole terminal shape.

5. 3mm and 4mm land pattern can be used without change.

(Gull wing is suitable for 4mm size land pattern.)

6. Heat resistance performance enables high

temperature peak re-flow soldering.

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Small sensors 2. Optical Transceiver Module

3. Copier 4. Printer

5. Compact Power Supply 6. Wireless Radio module

1.00±0.15

0.75±0.15

3.4

2.7

3.6 2.2 Dia.

3.6

2.3

0.45

0.4 Depth

0.6

#1

#2

#3

2.0

0.1 Min.

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVG3A

1.00±0.15

0.75±0.15

3.4

2.7

4.5 2.2 Dia.

3.6

2.3

0.45

0.4 Depth

2.0

#1

#2

#3

0.1 Min.

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVG3G

3.6

2.82.8

5.6

3.4

2.2Dia.

(2.5)

2.0

1.1

0.8±0.2 0.5

#2

#1#3

0.55 Depth 0.5

0.5 0.5

0.1 min.0.1 min.

2.3

#2

#1 #3

CLOCKWISE

in mm

(

Tolerance : ±0.3

)

PVG3K

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVG3p100C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 10ohm ±20% ±150ppm/°C

PVG3p200C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10) 20ohm ±20% ±150ppm/°C

PVG3p500C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 50ohm ±20% ±150ppm/°C

PVG3p101C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 100ohm ±20% ±150ppm/°C

PVG3p201C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 200ohm ±20% ±150ppm/°C

PVG3p501C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 500ohm ±20% ±150ppm/°C

PVG3p102C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 1k ohm ±20% ±150ppm/°C

PVG3p202C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 2k ohm ±20% ±150ppm/°C

PVG3p502C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 5k ohm ±20% ±150ppm/°C

PVG3p103C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 10k ohm ±20% ±150ppm/°C

PVG3p203C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 20k ohm ±20% ±150ppm/°C

PVG3p503C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 50k ohm ±20% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

24

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PVG3p104C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 100k ohm ±20% ±150ppm/°C

PVG3p204C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 200k ohm ±20% ±150ppm/°C

PVG3p504C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 500k ohm ±20% ±150ppm/°C

PVG3p105C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 1M ohm ±20% ±150ppm/°C

PVG3p205C01 0.25W(70°C) Reflow/Soldering Iron 1(210°±10°) 2M ohm ±20% ±150ppm/°C

The blank column is filled with the code of adjustment direction and lead type A (top, J-hook), G (top, gull-wing), or K (rear).

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PVG3p100A01

PVG3p200A01

PVG3p500A01

PVG3p101A01

PVG3p201A01

PVG3p501A01

PVG3p102A01

PVG3p202A01

PVG3p502A01

PVG3p103A01

PVG3p203A01

PVG3p503A01

PVG3p104A01

PVG3p204A01

PVG3p504A01

PVG3p105A01

PVG3p205A01

0.25(70°C)

Reflow/Soldering Iron

1(210°±10°)

10 ohm±20%

20 ohm±20%

50 ohm±20%

100 ohm±20%

200 ohm±20%

500 ohm±20%

1k ohm±20%

2k ohm±20%

5k ohm±20%

10k ohm±20%

20k ohm±20%

50k ohm±20%

100k ohm±20%

200k ohm±20%

500k ohm±20%

1M ohm±20%

2M ohm±20%

±250

±100

Non Standard

Product

(Cd included)

■ Construction

PVG3A/PVG3G

M

2

Cover Rotor

#2-Terminal

#1-Terminal

#3-Terminal

Ceramic

Substrate

Wiper

Case

Resistive

Element

O-Ring

PVG3K

M

2

Cover

Rotor

#2-Terminal

#1-Terminal

Ceramic

Substrate

Wiper

Case

Resistive

Element

O-Ring

#3-Terminal

■ Standard Land Pattern

PVG3A

2.1

0.9

1.1 1.11.2

1.4

in mm

(

Tolerance : ±0.1

)

PVG3G

.2.5.2.5

1.31.3

1.1 1.11.2

1.4

in mm

(

Tolerance : ±0.1

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

25

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Standard Land Pattern

PVG3K

1.2 1.21.1

1.5

3.2 dia.

1.01.0

3.1 3.1

in mm

(

Tolerance : ±0.1

)

■ Characteristics ∆TR ±2%

∆V.S.S ±1%

∆TR ±2%

∆V.S.S ±1%

IR 10Mohm min.

∆TR ±1%

∆V.S.S ±1%

∆TR ±1%

∆V.S.S ±1%

∆TR ±3% or 3ohm max., whichever is greater

∆V.S.S ±1%

∆TR ±2%

∆V.S.S ±2%

∆TR ±3%

∆V.S.S ±2%

∆TR RV100ohm ... ±3% or 2ohm max., whichever is greater

RG100kohm ... +0/-10%

∆TR : Total Resistance Change

∆V.S.S : Voltage Setting Stability

IR : Insulation ResistanceR

R : Standard Total Resistance

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (50cycles)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVG3 Series Notice

26

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Standard soldering condition

(a) Reflow soldering :

Refer to the standard temperature profile.

(b) Soldering iron

Temperature of tip : 400 deg. C max.

Soldering time : 3 sec. max.

Diameter of tip : 2mm dia. max.

Wattage of iron : 30W max.

Before using other soldering conditions more

than those listed above, please consult with a

Murata factory representative prior to using.

If the soldering conditions are not

suitable, e.g., excessive time and/or excessive

temperature, the trimmer potentiometer may

deviate from the specified characteristics.

(2) Cannot be soldered using the flow soldering

method. If you use the flow soldering method,

the trimmer potentiometer may not function.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

(4) Apply the appropriate amount of solder paste.

If the amount of solder paste applied to the

land is insufficient, the required adhesive

strength cannot be obtained. If an excessive

amount of solder paste is applied, solder

bridging or flux overflow to the resistive

element surface can occur.

2. Mounting

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(2) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(4) In chip placers, the size of the cylindrical

pick-up nozzle should be outer dimension

2.5-3.0mm dia. and inner dimension

2.0-2.5mm dia..

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) Less than 3 minutes of total cleaning time by

dipping, vapor and ultra-sonic method.

(3) In case of ultra-sonic cleaning method, cleaning

conditions should be as follows.

(a) Power: 600W (67lit.) max.

(b) Frequency: 28kHz

(c) Temperature: Ambient temperature

Due to ultra-sonic cleaning equipment's peculiar

self-resonance point and that cleaning

compatibility usually depends on the jig

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVG3 Series Notice

27

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

construction and/or the cleaning condition such

as the depth of immersion, please check the

cleaning equipment to determine the suitable

conditions. If the condition is not suitable,

the trimmer potentiometer may deviate from

specified characteristics.

■ Reflow Soldering Standard Profile

Pre-heating in air Soldering Gradual cooling

in air

0

100

150

200

230

260

Temperature (°C)

60-120 sec. 40 sec. max.

(Melting zone)

Time

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot.

* Recommended screwdriver for manual adjustment

TORAY INDUSTRIES, INC. : SA-2225

(Murata P/N : KMDR070)

* Recommended screwdriver bit for automatic

adjustment

TORAY INDUSTRIES, INC. : JB-2225

(Mutata P/N : KMBT070)

We can supply the screwdrivers above.

If you place order, please specify the Murata P/N.

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence.

3. When adjusting with an adjustment tool, the applied

force to the adjustment screw should not exceed

4.9N (Ref.; 500gf). If excessive force is applied,

the trimmer potentiometer may not function due to

damage.

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

28

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

SMD Sealed Type 4mm Size PVM4 Series

■ Features

1. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

2. Available for flow and reflow soldering method

while maintaining unique sealed construction.

3. Simple construction by 3-piece parts achieves high

reliability.

4. Large diameter slot of rotor improves driver

insertion.

5. Available for cleaning after soldering

6. High grade version is available (PVM4AxxxD01).

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Security 2. OA, FA equipments

3. Measuring equipments 4. Professional cameras

5. Encorders 6. Sensors

#2

#1 #3

CLOCKWISE

#1

#2

#3

4.0

2.7±0.1

(2.4)4.7

2.0±0.2

0.7

0.75

0.55±0.1

0.6

0.8

1.5

2.4

(0.3)

0.85 1.8 0.85

0.35±0.1 Depth

1.7

3.8 Dia.

1.5 Dia.

in mm

(

Tolerance : ±0.3

)

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVM4A101C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 100ohm ±25% ±250ppm/°C

PVM4A201C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 200ohm ±25% ±250ppm/°C

PVM4A301C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 300ohm ±25% ±250ppm/°C

PVM4A501C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 500ohm ±25% ±250ppm/°C

PVM4A102C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 1k ohm ±25% ±250ppm/°C

PVM4A202C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 2k ohm ±25% ±250ppm/°C

PVM4A302C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 3k ohm ±25% ±250ppm/°C

PVM4A502C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 5k ohm ±25% ±250ppm/°C

PVM4A103C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 10k ohm ±25% ±250ppm/°C

PVM4A203C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 20k ohm ±25% ±250ppm/°C

PVM4A303C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 30k ohm ±25% ±250ppm/°C

PVM4A503C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 50k ohm ±25% ±250ppm/°C

PVM4A104C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 100k ohm ±25% ±250ppm/°C

PVM4A204C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 200k ohm ±25% ±250ppm/°C

PVM4A304C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 300k ohm ±25% ±250ppm/°C

PVM4A504C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 500k ohm ±25% ±250ppm/°C

PVM4A105C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 1M ohm ±25% ±250ppm/°C

PVM4A205C01 0.1W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 2M ohm ±25% ±250ppm/°C

PVM4A101D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 100ohm ±20% ±100ppm/°C

PVM4A201D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 200ohm ±20% ±100ppm/°C

PVM4A301D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 300ohm ±20% ±100ppm/°C

PVM4A501D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 500ohm ±20% ±100ppm/°C

PVM4A102D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 1k ohm ±20% ±200ppm/°C

PVM4A202D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 2k ohm ±20% ±200ppm/°C

PVM4A302D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 3k ohm ±20% ±200ppm/°C

PVM4A502D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 5k ohm ±20% ±200ppm/°C

PVM4A103D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 10k ohm ±20% ±150ppm/°C

PVM4A203D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 20k ohm ±20% ±150ppm/°C

PVM4A303D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 30k ohm ±20% ±150ppm/°C

PVM4A503D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 50k ohm ±20% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

29

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PVM4A104D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 100k ohm ±20% ±150ppm/°C

PVM4A204D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 200k ohm ±20% ±150ppm/°C

PVM4A304D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 300k ohm ±20% ±150ppm/°C

PVM4A504D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 500k ohm ±20% ±150ppm/°C

PVM4A105D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 1M ohm ±20% ±150ppm/°C

PVM4A205D01 0.25W(70°C) Flow/Reflow/Soldering Iron 1(240°±10°) 2M ohm ±20% ±150ppm/°C

The last three digits express the individual specification codes. C01 for standard type and D01 for high-liability type.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PVM4A101A01

PVM4A201A01

PVM4A301A01

PVM4A501A01

PVM4A102A01

PVM4A202A01

PVM4A302A01

PVM4A502A01

PVM4A103A01

PVM4A203A01

PVM4A303A01

PVM4A503A01

PVM4A104A01

PVM4A204A01

PVM4A304A01

PVM4A504A01

PVM4A105A01

PVM4A205A01

PVM4A101B01

PVM4A201B01

PVM4A301B01

PVM4A501B01

PVM4A102B01

PVM4A202B01

PVM4A302B01

PVM4A502B01

PVM4A103B01

PVM4A203B01

PVM4A303B01

PVM4A503B01

PVM4A104B01

PVM4A204B01

PVM4A304B01

PVM4A504B01

PVM4A105B01

PVM4A205B01

0.1(70°C)

0.25(70°C)

Flow/Reflow/Soldering Iron

1(240°±10°)

100 ohm±25%

200 ohm±25%

300 ohm±25%

500 ohm±25%

1k ohm±25%

2k ohm±25%

3k ohm±25%

5k ohm±25%

10k ohm±25%

20k ohm±25%

30k ohm±25%

50k ohm±25%

100k ohm±25%

200k ohm±25%

300k ohm±25%

500k ohm±25%

1M ohm±25%

2M ohm±25%

100 ohm±20%

200 ohm±20%

300 ohm±20%

500 ohm±20%

1k ohm±20%

2k ohm±20%

3k ohm±20%

5k ohm±20%

10k ohm±20%

20k ohm±20%

30k ohm±20%

50k ohm±20%

100k ohm±20%

200k ohm±20%

300k ohm±20%

500k ohm±20%

1M ohm±20%

2M ohm±20%

±250

±150

±100

±150

Non Standard

Product

(Cd Free)

Non Standard

Product

(Cd included)

Non Standard

Product

(Cd Free)

Non Standard

Product

(Cd included)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

30

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Construction

Rotor

#1 Terminal

#3 Terminal

#2 Terminal

Wiper

Resistive

Element

Ceramic

Substrate

Rubber

■ Standard Land Pattern

1.7

1.8

3.2

1.2

3.2

1.1

1.6

1.1 in mm

(

Tolerance : ±0.1

)

■ Characteristics

Item PVM4ApppC01 PVM4ApppD01

Res. Change : ±3%Humidity Exposure Res. Change : ±2%

Res. Change : ±3%High Temperature Exposure Res. Change : ±2%

Res. Change : ±3%Humidity Load Life Res. Change : ±3%

Res. Change : ±3%Temperature Load Life Res. Change : ±3%

Res. Change : ±3%Temperature Cycle Res. Change : ±2%

Res. Change : ±10% (20 cycles)Rotational Life Res. Change : ±5% (100 cycles)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVM4 Series Notice

31

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Can be soldered by reflow soldering method, flow

soldering method, and soldering iron. (In case

of flow soldering, it is necessary to clean

after soldering.)

(2) Use our standard land dimension. Excessive land

area causes displacement due to the effect of

the surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(3) Standard soldering condition

(a) Reflow and flow soldering :

Refer to the standard temperature profile.

(b) Soldering iron:

>Temperature of tip 400 deg.C max.

>Soldering time 5 sec. max.

>Diameter 2mm dia. max.

>Wattage of iron 40W max.

Before using other soldering conditions than

those listed above, please consult with a Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

(4) Apply the appropriate amount of solder paste.

The thickness of solder paste should be printed

from 100 micro m to 150 micro m and the

dimension of land pattern used should be Murata's

standard land pattern at reflow soldering.

Insufficient amounts of solder can lead to

insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

(5) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

2. Mounting

(1) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

(2) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(3) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 4.0mm dia. and inner dimension 2.0mm

dia.

3. Cleaning

(1) Isopropyl alcohol and Ethyl alcohol are

available materials for cleaning.

For other materials, please consult with a Murata

factory representative prior to using.

(2) The following are the recommended cleaning

conditions for the potentiometer. If this part

is cleanied under any other conditions than

these listed below, the sealing construction may

be damaged.

(Condition)

Type1: Cold dipping/Max. 5 min.

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVM4 Series Notice

32

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

Type2: Hot dipping/Max. 2 min.

Type3: Ultra-sonic washing/Max. 1 min.

(20W/litre or below)

Type4: Hot dipping/Max. 1 min.+

Ultra-sonic washing/Max.1 min.

(20W/litre or below)

Type5: Hot dipping/Max. 1 min.+

Ultra-sonic washing/Max. 30 sec.+

(20W/litre or below)/(Preferably max. 30 sec.)

Vapor/Max.30 sec.

Due to ultra-sonic cleaning equipment's peculiar

self-resonance point and that cleaning compatibility

usually depends on the jig construction and/or the

cleaning condition such as the depth of immersion,

please check the cleaning equipment to determine

the suitable conditions.

If the condition is not suitable, the trimmer

potentiometer may deviate from specified

characteristics.

■ Flow Soldering Standard Profile

260

200

150

100

060 to 120 sec. 10 sec. max.

(Melting zone)

Time

Temperature (°C)

Pre-heating(in the air) Soldering Gradual Cooling

(in the air)

■ Reflow Soldering Standard Profile

260

200

180

150

100

0

60 to 120 sec.

150 to 180°C

30 to 50 sec.

(Melting zone)

Time

Temperature (°C)

Pre-heating(in the air) Soldering

Gradual Cooling

(in the air)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdriver below.

* Recommended screwdriver for manual adjustment

VESSEL MFG.: NO. 9000-2.6x30

(Murata P/N : KMDR120)

We can supply the screwdrivers above.

If you place order, please specify the Murata P/N.

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. Please use within the effective rotational angle.

The potentiometer does not have a mechanical stop

for over rotation. In cases out of effective

rotational angle, the trimmer potentiometer may

not function.

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

33

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

SMD Sealed Type Multi-turns PVG5/PV01 Series

PVG5 Series

■ Features

1. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

2. Available with reflow soldering method

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. Both Top and side adjustment directions

6. Ultra smaller volume (1/5-1/2) than leaded multi-turn

potentiometer.

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. OA equipment

3. Madical equipment 4. Power supply

5. Sensors

6. Base station for cellular phone

4.8

5.0

3.5

3.9

3-0.8

0.2

2.4

1.2

2.6

3-0.9

3-0.7

0.5

2.5

ADJ. Slot

DIA 1.5

Width 0.6

Depth 0.5 #2

#3 #1

#2

#1 #3

CLOCKWISE

Schematic

in mm

(

Tolerance : ±0.3

)

PVG5A

1.2

2.4

2.3

4.9

3.7

3-0.7

2.6

4.8

3-0.8

3-0.9

0.5

#2

#1 #3

CLOCKWISE

#1

#2 #3

Schematic

ADJ.Slot

DIA 1.5

Width 0.6

Depth 0.5

in mm

(

Tolerance : ±0.3

)

PVG5H

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVG5p100C01 0.25W(70°C) Reflow/Soldering Iron 11 10ohm ±10% ±150ppm/°C

PVG5p200C01 0.25W(70°C) Reflow/Soldering Iron 11 20ohm ±10% ±150ppm/°C

PVG5p500C01 0.25W(70°C) Reflow/Soldering Iron 11 50ohm ±10% ±150ppm/°C

PVG5p101C01 0.25W(70°C) Reflow/Soldering Iron 11 100ohm ±10% ±150ppm/°C

PVG5p201C01 0.25W(70°C) Reflow/Soldering Iron 11 200ohm ±10% ±150ppm/°C

PVG5p501C01 0.25W(70°C) Reflow/Soldering Iron 11 500ohm ±10% ±150ppm/°C

PVG5p102C01 0.25W(70°C) Reflow/Soldering Iron 11 1k ohm ±10% ±150ppm/°C

PVG5p202C01 0.25W(70°C) Reflow/Soldering Iron 11 2k ohm ±10% ±150ppm/°C

PVG5p502C01 0.25W(70°C) Reflow/Soldering Iron 11 5k ohm ±10% ±150ppm/°C

PVG5p103C01 0.25W(70°C) Reflow/Soldering Iron 11 10k ohm ±10% ±150ppm/°C

PVG5p203C01 0.25W(70°C) Reflow/Soldering Iron 11 20k ohm ±10% ±150ppm/°C

PVG5p503C01 0.25W(70°C) Reflow/Soldering Iron 11 50k ohm ±10% ±150ppm/°C

PVG5p104C01 0.25W(70°C) Reflow/Soldering Iron 11 100k ohm ±10% ±150ppm/°C

PVG5p204C01 0.25W(70°C) Reflow/Soldering Iron 11 200k ohm ±10% ±150ppm/°C

PVG5p504C01 0.25W(70°C) Reflow/Soldering Iron 11 500k ohm ±10% ±150ppm/°C

PVG5p105C01 0.25W(70°C) Reflow/Soldering Iron 11 1M ohm ±10% ±150ppm/°C

PVG5p205C01 0.25W(70°C) Reflow/Soldering Iron 11 2M ohm ±10% ±150ppm/°C

The blank column is filled with the code of adjustment direction A (top) or H (side).

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

34

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PVG5p100A01

PVG5p200A01

PVG5p500A01

PVG5p101A01

PVG5p201A01

PVG5p501A01

PVG5p102A01

PVG5p202A01

PVG5p502A01

PVG5p103A01

PVG5p203A01

PVG5p503A01

PVG5p104A01

PVG5p204A01

PVG5p504A01

PVG5p105A01

PVG5p205A01

0.25(70°C)

Reflow/Soldering Iron

11

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±200

±100

Non Standard

Product

(Cd included)

■ Construction

#2 Terminal

CaseGear

Adjustment Screw

Resistive ElementWiper

Ceramic Substrate#1, #3 Terminal

■ Standard Land Pattern

PVG5A

1.3

2.252.25

1.31.21.3

1.6 1.6

in mm

(

Tolerance : ±0.1

)

PVG5H

2.82.8

1.31.01.3

1.6

1.3

in mm

(

Tolerance : ±0.1

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

35

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 10Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3% or 3ohm max.,

whichever is greater

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±3% or 3ohm max.,

whichever is greater

Temperature Cycle

Humidity

Vibration

Shock

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (100 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

36

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV01 Series

■ Features

1. Small size (6.35x6.35x4.3mm)

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available with reflow soldering method

4. Available for ultrasonic cleaning after soldering

5. Clutch mechanism prevents excessive wiper rotation.

6. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. FAX

3. PPCs 4. Printers

5. Sensors

0.6±0.2

1.2

6.4

#2

#3#1

Clockwise

#2

1.1

4.0

6.7

1.8±0.2 DIA

1.0

0.6

3−1.0

#1 #3

2.5 2.5

3−0.4±0.1 Dia.

in mm

(

Tolerance : ±0.3

)

PV01P

0.6±0.2

1.2

6.4

#2

#3#1

Clockwise

#2

#1 #3

1.1

4.0

2.5 2.5

3−0.4±0.1 Dia.

6.7

1.8±0.2 Dia.

1.0

0.6

3−1.0

in mm

(

Tolerance : ±0.3

)

PV01W

6.4

#2

#3#1

Clockwise

#2

#1 #3

4.0

2.5 2.5

3−0.4±0.1 Dia.

6.7

1.0

0.6 3−1.0

1.1

0.6±0.2

1.8±0.2 Dia.

in mm

(

Tolerance : ±0.3

)

PV01X

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV01p100C01 0.25W(85°C) Reflow/Soldering Iron 12 10ohm ±10% ±150ppm/°C

PV01p200C01 0.25W(85°C) Reflow/Soldering Iron 12 20ohm ±10% ±150ppm/°C

PV01p500C01 0.25W(85°C) Reflow/Soldering Iron 12 50ohm ±10% ±150ppm/°C

PV01p101C01 0.25W(85°C) Reflow/Soldering Iron 12 100ohm ±10% ±150ppm/°C

PV01p201C01 0.25W(85°C) Reflow/Soldering Iron 12 200ohm ±10% ±150ppm/°C

PV01p501C01 0.25W(85°C) Reflow/Soldering Iron 12 500ohm ±10% ±150ppm/°C

PV01p102C01 0.25W(85°C) Reflow/Soldering Iron 12 1k ohm ±10% ±150ppm/°C

PV01p202C01 0.25W(85°C) Reflow/Soldering Iron 12 2k ohm ±10% ±150ppm/°C

PV01p502C01 0.25W(85°C) Reflow/Soldering Iron 12 5k ohm ±10% ±150ppm/°C

PV01p103C01 0.25W(85°C) Reflow/Soldering Iron 12 10k ohm ±10% ±150ppm/°C

PV01p203C01 0.25W(85°C) Reflow/Soldering Iron 12 20k ohm ±10% ±150ppm/°C

PV01p253C01 0.25W(85°C) Reflow/Soldering Iron 12 25k ohm ±10% ±150ppm/°C

PV01p503C01 0.25W(85°C) Reflow/Soldering Iron 12 50k ohm ±10% ±150ppm/°C

PV01p104C01 0.25W(85°C) Reflow/Soldering Iron 12 100k ohm ±10% ±150ppm/°C

PV01p204C01 0.25W(85°C) Reflow/Soldering Iron 12 200k ohm ±10% ±150ppm/°C

PV01p254C01 0.25W(85°C) Reflow/Soldering Iron 12 250k ohm ±10% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

37

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV01p504C01 0.25W(85°C) Reflow/Soldering Iron 12 500k ohm ±10% ±150ppm/°C

PV01p105C01 0.25W(85°C) Reflow/Soldering Iron 12 1M ohm ±10% ±150ppm/°C

The blank column is filled with the code of adjustment direction P (side), W (top) or X (side).

Magazine packaging is standard for PV01 series.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV01p100A01

PV01p200A01

PV01p500A01

PV01p101A01

PV01p201A01

PV01p501A01

PV01p102A01

PV01p202A01

PV01p502A01

PV01p103A01

PV01p203A01

PV01p253A01

PV01p503A01

PV01p104A01

PV01p204A01

PV01p254A01

PV01p504A01

PV01p105A01

0.25(85°C)

Refrow/Soldering Iron

12

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Gear Case

Terminal

Adjustment Screw

Alumina Substrate

Wiper

Cermet Resistive

Element

■ Standard Land Pattern

PV01P

in mm

(

Tolerance : ±0.1

)

1.6

1.6 1.6

1.81.8

3.4

4.854.85

PV01W/PV01X

1.6

1.6 1.6

1.81.8

3.4

3.83.8

in mm

(

Tolerance : ±0.1

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

38

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Characteristics ∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR RV100ohm ... ±3%

RG100ohm ... ±2%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

R : Standard Total Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVG5/PV01 Series Notice

39

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Standard soldering condition

(a) Reflow and flow soldering:

Refer to the standard temperature profile.

(b) Soldering iron:

>Temperature of tip 260 deg.C max.

>Soldering time 3 sec. max.

>Diameter 2mm dia. max.

>Wattage of iron 30W max.

Before using other soldering conditions than

those listed above, please consult with a Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer capacitor may deviate from the

specified characteristics.

(2) Cannot be soldered using the flow soldering

method. If you use the flow soldering method,

the trimmer potentiometer may not function.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

(4) Insufficient amounts of solder can lead to

insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

2. Mounting

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

surface tension of the solder. Insufficient land

area leads to insufficient soldering strength of

the chip.

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(4) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 4.0mm dia. and inner dimension 2.0mm

dia.

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

>Power: 600W (67 liter) max.

>Frequency: 28kHz

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

cleaning compatibility usually depends on the jig

construction and/or the cleaning condition such

as the depth of immersion, please check the

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVG5/PV01 Series Notice

40

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

cleaning equipment to determine the suitable

conditions.

If the trimmer potentiometer is cleaned by other

conditions, the trimmer potentiometer may be

damaged.

■ Reflow Soldering Standard Profile

230

200

100

0

60-120 sec. 30 sec. max.

(Melting zone)

Time

Temperature (°C)

For reflow soldering

Pre-heating (in the air) Soldering

Gradual Cooling

(in the air)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdrivers for manual adjustment

VESSEL MFG. : NO.9000-1.3x30

(Murata P/N : KMDR130)

ENGINEER INC. : DA-40

(Murata P/N : KMDR180)

We can supply the screwdrivers above.

If you place order, please specify Murata P/N.

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. When adjusting with a screwdriver, do not apply

excessive force (preferable 4.9N (Ref; 500gf) max.)

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

41

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

Lead Sealed Type Single-turn PVC6/PV32/PV34 Series

PVC6 Series

■ Features

1. Enlarged and colored rotor provides superior

adjustability.

2. Cone-shaped rotor improves driver insertion during

automatic adjustment.

3. Available for "Zero" plus adjustment tool (taper

head) use

4. Easy to see 11-scales adjustment positions.

5. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

6. Available for ultrasonic cleaning after soldering

7. During cutting process by the inserter machine, the

round shaped lead wire prevents clinch problems

and realizes longer life of cutter than flat shaped

lead wire.

8. Flammability: UL94V-0

9. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. DY 2. CRT display

3. Power supply 4. Professional cameras

5. CATV 6. FAX

7. Printers 8. OA Equipment

9. Sensors

6.9

5.27.0

2.52.5

3-0.5 Dia.

2.5

#3

#1

#2

3.2 Dia.

0.55W×3.2L×1.3D

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVC6A

6.9

5.27.0

2.52.5

3-0.5 Dia.

2.5

#3

#1

#2

3.2 Dia.

0.55W×3.2L×1.3D

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVC6D

8.0

6.9

6.0

6.5

2.52.5

#1

3-0.5 Dia.

#2 #3

4.62-5.5

7.5

0.75 2.5

3.2 Dia.

0.55W×3.2L×1.3D

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVC6E

6.9

5.27.0

2.52.5

3-0.5 Dia.

#3

#1

#2

3.2 Dia.

0.55W×3.2L×1.3D

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVC6M

8.0

6.9

6.0

6.5

2.52.5

#1

3-0.5 Dia.

#2 #3

4.65.5

2-7.5

0.75 2.5

3.2 Dia.

0.55W×3.2L×1.3D

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVC6H

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

42

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

8.0

6.9

6.0

6.5

2.52.5

#3

3-0.5 Dia.

#2 #1

4.65.5

2-7.5

0.75 2.5

3.2 Dia.

0.55W×3.2L×1.3D

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVC6G

8.0

6.9

6.0

6.5

2.52.5

#1

3-0.5 Dia.

#2 #3

4.6

3-5.5

3.25

3.2 Dia.

0.55W×3.2L×1.3D

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PVC6Q

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PVC6p100C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 10ohm ±10% ±100ppm/°C

PVC6p200C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 20ohm ±10% ±100ppm/°C

PVC6p250C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 25ohm ±10% ±100ppm/°C

PVC6p500C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 50ohm ±10% ±100ppm/°C

PVC6p101C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 100ohm ±10% ±100ppm/°C

PVC6p201C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 200ohm ±10% ±100ppm/°C

PVC6p251C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 250ohm ±10% ±100ppm/°C

PVC6p501C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 500ohm ±10% ±100ppm/°C

PVC6p102C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 1k ohm ±10% ±100ppm/°C

PVC6p202C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 2k ohm ±10% ±100ppm/°C

PVC6p252C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 2.5k ohm ±10% ±100ppm/°C

PVC6p502C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 5k ohm ±10% ±100ppm/°C

PVC6p103C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 10k ohm ±10% ±100ppm/°C

PVC6p203C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 20k ohm ±10% ±100ppm/°C

PVC6p253C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 25k ohm ±10% ±100ppm/°C

PVC6p503C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 50k ohm ±10% ±100ppm/°C

PVC6p104C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 100k ohm ±10% ±100ppm/°C

PVC6p204C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 200k ohm ±10% ±100ppm/°C

PVC6p254C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 250k ohm ±10% ±100ppm/°C

PVC6p504C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 500k ohm ±10% ±100ppm/°C

PVC6p105C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 1M ohm ±10% ±100ppm/°C

PVC6p205C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 2M ohm ±10% ±100ppm/°C

PVC6p505C01 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 5M ohm ±10% ±100ppm/°C

PVC6p100C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 10ohm ±10% ±100ppm/°C

PVC6p200C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 20ohm ±10% ±100ppm/°C

PVC6p250C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 25ohm ±10% ±100ppm/°C

PVC6p500C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 50ohm ±10% ±100ppm/°C

PVC6p101C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 100ohm ±10% ±100ppm/°C

PVC6p201C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 200ohm ±10% ±100ppm/°C

PVC6p251C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 250ohm ±10% ±100ppm/°C

PVC6p501C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 500ohm ±10% ±100ppm/°C

PVC6p102C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 1k ohm ±10% ±100ppm/°C

PVC6p202C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 2k ohm ±10% ±100ppm/°C

PVC6p252C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 2.5k ohm ±10% ±100ppm/°C

PVC6p502C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 5k ohm ±10% ±100ppm/°C

PVC6p103C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 10k ohm ±10% ±100ppm/°C

PVC6p203C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 20k ohm ±10% ±100ppm/°C

PVC6p253C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 25k ohm ±10% ±100ppm/°C

PVC6p503C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 50k ohm ±10% ±100ppm/°C

PVC6p104C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 100k ohm ±10% ±100ppm/°C

PVC6p204C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 200k ohm ±10% ±100ppm/°C

PVC6p254C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 250k ohm ±10% ±100ppm/°C

PVC6p504C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 500k ohm ±10% ±100ppm/°C

PVC6p105C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 1M ohm ±10% ±100ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

43

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PVC6p205C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 2M ohm ±10% ±100ppm/°C

PVC6p505C04 0.5W(70°C) Flow/Soldering Iron 1(240°±5°) 5M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (A, D, E, G, H, M and Q).

The order quantity should be an integral multiple of the "Minimum Quantity" .

The last three digits express the individual specification codes. C01 for standard type and C04 for radial taping type (PVC6M/PVC6Q series only).

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PVC6p100A01

PVC6p200A01

PVC6p250A01

PVC6p500A01

PVC6p101A01

PVC6p201A01

PVC6p251A01

PVC6p501A01

PVC6p102A01

PVC6p202A01

PVC6p252A01

PVC6p502A01

PVC6p103A01

PVC6p203A01

PVC6p253A01

PVC6p503A01

PVC6p104A01

PVC6p204A01

PVC6p254A01

PVC6p504A01

PVC6p105A01

PVC6p205A01

PVC6p505A01

PVC6p100A04

PVC6p200A04

PVC6p250A04

PVC6p500A04

PVC6p101A04

PVC6p201A04

PVC6p251A04

PVC6p501A04

PVC6p102A04

PVC6p202A04

PVC6p252A04

PVC6p502A04

PVC6p103A04

PVC6p203A04

PVC6p253A04

PVC6p503A04

PVC6p104A04

PVC6p204A04

PVC6p254A04

PVC6p504A04

PVC6p105A04

PVC6p205A04

PVC6p505A04

0.5(70°C)

Flow/Soldering Iron

1(240°±5°)

10 ohm±10%

20 ohm±10%

25 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

250 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

2.5k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

5M ohm±10%

10 ohm±10%

20 ohm±10%

25 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

250 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

2.5k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

5M ohm±10%

±100

Non Standard

Product

(Cd Free)

Non Standard

Product

(Cd included)

Non Standard

Product

(Cd Free)

Non Standard

Product

(Cd included)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

44

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Construction

Cover

Terminal

Ceramic

Substrate

Rotor

"O"-Ring

Wiper

Case

■ Mounting Holes

PVC6A/PVC6E

2.5 2.5

2.5

(2)

(1)

(3)

Tolerance:±0.1

in mm

PVC6D/PVC6H

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PVC6M/PVC6Q

2.5 2.5

(2)(1) (3)

Tolerance:±0.1

in mm

PVC6G

(3) (1)

(2)

2.5

Tolerance ±0.1

in mm

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

45

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±2%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±4%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

46

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV32 Series

■ Features

1. 6 standard terminal styles

2. Round shaped body enables smaller area mount than

same 6mm square potentiometer.

3. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

4. Available for ultrasonic cleaning after soldering

5. Flammability : UL94V-0

■ Applications

1. HDTVs 2. Professional cameras

3. CATV 4. FAX

5. Printers 6. Sensors

7. Power supply

#1#2 #3

0.6

2.8 Dia.

4.1±0.3

4.6±0.3

0.35 max.

8.0±1.0

0.4

CL

90°±6°

6.6±0.5 Dia.

2.5

1.0 Depth

3−0.5±0.1 Dia.

0.85 Dia. max.

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PV32H

0.6

2.8 Dia.

1.0 Depth

#2

#1 #3

CLOCKWISE

#1#2 #3

2.5

6.6±0.5 Dia.

7.0±1.0 5.5±0.3

6.0±0.3

0.2

3−0.5±0.1 Dia.

2.5 in mm

(

Tolerance : ±0.3

)

PV32R

0.6

2.8 DIA

1.0 Depth

#2

#1 #3

CLOCKWISE

#1#2 #3

2.5

6.6±0.5 DIA.

7.0±1.0

2.5

5.5±0.3

6.0±0.3

0.2

3−0.5±0.1 DIA.

2.5 in mm

(

Tolerance : ±0.3

)

PV32P

#2

#1 #3

CLOCKWISE

#1#2#3

6.9 5.9±0.4

5.0±1.0

2.5

0.6

1.0 Depth

6.0±1.0

4.7±0.3

8.0±0.3

0.2±0.1 2.8 Dia.

5.0

6.4±0.4

3−0.5±0.1 Dia.

2.5

1.0

in mm

(

Tolerance : ±0.3

)

PV32N

#2

#1 #3

CLOCKWISE

#1 #2 #3

6.9 5.9±0.4

6.5±1.0

2.5

0.6

1.0 Depth

8.0±1.0

4.7±0.3

8.0±0.3

0.2±0.1 2.8 Dia.

5.0

6.4±0.4

3−0.5±0.1 Dia.

2.5

1.0

in mm

(

Tolerance : ±0.3

)

PV32S

#2

#1 #3

CLOCKWISE

#1 #2 #3

6.9 5.9±0.4

5.5±1.0

2.5

0.6

1.0 Depth

8.0±1.0

4.7±0.3

8.0±0.3

0.2±0.1 2.8 Dia.

5.0

6.4±0.4

3−0.5±0.1 Dia.

2.5

1.0

in mm

(

Tolerance : ±0.3

)

PV32T

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV32p100A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 10ohm ±20% ±100ppm/°C

PV32p200A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 20ohm ±20% ±100ppm/°C

PV32p250A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 25ohm ±20% ±100ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

47

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV32p500A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 50ohm ±20% ±100ppm/°C

PV32p101A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 100ohm ±20% ±100ppm/°C

PV32p201A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 200ohm ±20% ±100ppm/°C

PV32p251A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 250ohm ±20% ±100ppm/°C

PV32p501A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 500ohm ±20% ±100ppm/°C

PV32p102A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 1k ohm ±20% ±100ppm/°C

PV32p202A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 2k ohm ±20% ±100ppm/°C

PV32p252A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 2.5k ohm ±20% ±100ppm/°C

PV32p502A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 5k ohm ±20% ±100ppm/°C

PV32p103A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 10k ohm ±20% ±100ppm/°C

PV32p203A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 20k ohm ±20% ±100ppm/°C

PV32p253A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 25k ohm ±20% ±100ppm/°C

PV32p503A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 50k ohm ±20% ±100ppm/°C

PV32p104A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 100k ohm ±20% ±100ppm/°C

PV32p204A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 200k ohm ±20% ±100ppm/°C

PV32p254A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 250k ohm ±20% ±100ppm/°C

PV32p504A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 500k ohm ±20% ±100ppm/°C

PV32p105A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 1M ohm ±20% ±100ppm/°C

PV32p205A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 2M ohm ±20% ±100ppm/°C

PV32p505A01 0.5W(70°C) Flow/Soldering Iron 1(230°±5°) 5M ohm ±20% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (H, P, R, N, S and T).

The order quantity should be an integral multiple of the "Minimum Quantity".

■ Construction

"O"-Ring

Resistive

Element

Rotor

Cover

Terminal

Wiper

Ceramic

Substrate

■ Mounting Holes

PV32H

(1) (3)

(2)

2.5

Tolerance:±0.1

in mm

PV32R

2.5 2.5

(2)(1) (3)

Tolerance:±0.1

in mm

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

48

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Mounting Holes

PV32P/PV32S

2.5 2.5

2.5

(2)

(1)

(3)

Tolerance:±0.1

in mm

PV32N

(3) (1)

(2)

2.5

Tolerance ±0.1

in mm

PV32T

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±2%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±4%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

49

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV34 Series

■ Features

1. 5 standard terminal styles

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Flammability : UL94V-0

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. HDTVs 2. Professional cameras

3. CATV 4. Printers

5. Sensors 6. Switching power supplies

#2

#1 #3

CLOCKWISE

#1

#2

#3

9.6

3−0.5±0.1 Dia.

3.8 Dia. 0.8

5.3 9.6

5.1

2.2±0.4

4.9

0.3

5.5±0.5

2.5 2.5

1.0 Depth

in mm

(

Tolerance : ±0.3

)

PV34F

#2

#1 #3

CLOCKWISE

#1 #2 #3

9.6

5.3

9.6

5.5±0.5

4.9

2.5 2.5

2.5

1.4±0.4

0.4

3.8 DIA.

0.8

1.0 Depth

3−0.5±0.1 DIA.

in mm

Tolerance ±0.3

(

PV34H

#2

#1 #3

CLOCKWISE

#1

#2

#3

9.6

3−0.5±0.1 Dia.

3.8 Dia. 0.8

5.3 9.6

2.5 4.8±0.4

4.9

0.3

5.5±0.5

2.5 2.5

1.0 Depth

in mm

(

Tolerance : ±0.3

)

PV34P

#1 #2 #3

9.6

5.3

9.6

5.5±0.5

4.9

2.5 2.5

2.4±0.4

0.4

3.8 Dia.

0.8

1.0 Depth

3−0.5±0.1 Dia.

in mm

(

Tolerance : ±0.3

)

#2

#1 #3

CLOCKWISE

PV34W

#2

#1 #3

CLOCKWISE

#1

#2#3

9.6

5.3

9.6

5.5±0.5

4.9

2.5 2.5

2.5

1.4±0.4

0.4

3.8 Dia.

0.8

1.0 Depth

3−0.5±0.1 Dia.

in mm

(

Tolerance : ±0.3

)

PV34X

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV34p100C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 10ohm ±10% ±150ppm/°C

PV34p200C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 20ohm ±10% ±150ppm/°C

PV34p500C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 50ohm ±10% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

50

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV34p101C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 100ohm ±10% ±150ppm/°C

PV34p201C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 200ohm ±10% ±100ppm/°C

PV34p501C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 500ohm ±10% ±100ppm/°C

PV34p102C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 1k ohm ±10% ±100ppm/°C

PV34p202C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 2k ohm ±10% ±100ppm/°C

PV34p502C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 5k ohm ±10% ±100ppm/°C

PV34p103C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 10k ohm ±10% ±100ppm/°C

PV34p203C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 20k ohm ±10% ±100ppm/°C

PV34p253C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 25k ohm ±10% ±100ppm/°C

PV34p503C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 50k ohm ±10% ±100ppm/°C

PV34p104C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 100k ohm ±10% ±100ppm/°C

PV34p204C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 200k ohm ±10% ±100ppm/°C

PV34p254C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 250k ohm ±10% ±100ppm/°C

PV34p504C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 500k ohm ±10% ±100ppm/°C

PV34p105C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 1M ohm ±10% ±100ppm/°C

PV34p205C01 0.5W(70°C) Flow/Soldering Iron 1(280°±15°) 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (F, H, P, X and W).

The order quantity should be an integral multiple of the "Minimum Quantity".

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV34p100A01

PV34p200A01

PV34p500A01

PV34p101A01

PV34p201A01

PV34p501A01

PV34p102A01

PV34p202A01

PV34p502A01

PV34p103A01

PV34p203A01

PV34p253A01

PV34p503A01

PV34p104A01

PV34p204A01

PV34p254A01

PV34p504A01

PV34p105A01

PV34p205A01

0.5(70°C)

Flow/Soldering Iron

1(280°±15°)

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Case

Rotor

"O"-Ring

Alumina Substrate

Terminal

Wiper

Cermet Resistive

Element

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

51

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Mounting Holes

PV34F

2.5

5.1

(2)

(3)(1)

2.5

Tolerance:±0.1

in mm

PV34H/PV34P

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PV34W

2.5 2.5

(2)(1) (3)

Tolerance:±0.1

in mm

PV34X

(3) (1)

(2)

2.5

Tolerance ±0.1

in mm

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±2%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR RV100kohm ... ±3%

RG100kohm ... ±5%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

R : Standard Total Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVC6/PV32/PV34 Series Notice

52

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Standard soldering condition

(a) Flow soldering :

>Pre-heating temp. 80-100 deg. C

>Soldering temp. 260 deg. C max.

>Soldering time 3 sec. max.

(b) Soldering iron :

>Temperature of tip 300 deg. C max.

>Soldering time 3 sec. max.

>Wattage of iron 40W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

(2) To minimize mechanical stress when adjusting,

the trimmer potentiometer should be mounted onto

PCB without gap.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

2. Mounting

(1) Use PCB hole to meet the pin of the trimmer

potentiometer. If the trimmer potentiometer

installs into insufficient PCB hole, the

trimmer potentimeter may be damaged by

mechanical stress.

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

>Power: 600W (67 liter) max.

>Frequency: 28kHz

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

cleaning compatibility usually depends on the jig

construction and/or the cleaning condition such

as the depth of immersion, please check the

cleaning equipment to determine the suitable

conditions.

If the trimmer potentiometer is cleaned by

other conditions, the trimmer potentiometer may

be damaged.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVC6/PV32/PV34 Series Notice

53

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdriver for manual adjustment

VESSEL MFG. : NO.9000+0x30

(Murata P/N : KMDR150)

TORAY INDUSTRIES, INC. : SA-2225

(Murata P/N : KMDR070)

ENGINEER INC. : DA-40

(Murata P/N : KMDR180)

* Recommended screwdriver bit for automatic

adjustment

VESSEL MFG. : NO.CA-10

(Murata P/N : KMBT090)

TORAY INDUSTRIES, INC. : JB-2225

(Murata P/N : KMBT070)

We can supply the screwdrivers avobe.

If you place an order, please specify the

Murata P/N.

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. When adjusting with an adjustment tool, the applied

force to the adjustment screw should not exceed

4.9N (Ref.; 500gf). If excessive force is applied,

the trimmer potentiometer may not function due to

damage.

4. The rotational torque at the position of the

adjustment range should not exceed the stop

strength.

5. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

54

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series

PV12 Series

■ Features

1. The unique inner gear system recognizes the

position of the center of the shaft of the

potentiometer.

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

■ Applications

1. HDTVs 2. Professional cameras

3. CATV 4. FAX

5. Printers 6. Sensors

7. Switching power supplies

#2

#1 #3

CLOCKWISE

#1

#2

#3

0.6±0.1

0.7±0.1 Depth

2.5±0.1

7.6±0.1 Dia.

6.6±0.1 7.0±1.0

0.5

3−0.5±0.1 Dia.

0.4±0.1

90°±6°

2.5±0.2

in mm

(

Tolerance : ±0.3

)

PV12H

#2

#1 #3

CLOCKWISE

#1

#2

#3

0.6±0.1

0.7±0.1 Depth

2.5±0.1

7.6±0.1 Dia.

6.6±0.1 7.0±1.0

0.5

3−0.5±0.1 Dia.

2.5

2.5 2.5

in mm

(

Tolerance : ±0.3

)

PV12P

#2

#1 #3

CLOCKWISE

#1 #2 #3

7.6±0.3

0.6±0.1

9.0±0.3

5.1±0.3

7.7±0.3

6.3±0.3

3−0.5±0.1 Dia.

7.0±1.0 0.5 2.5±0.1

3.6

2.5

2.5 2.5

0.7±0.1 Depth

in mm

(

Tolerance : ±0.3

)

PV12S

#2

#1 #3

CLOCKWISE

#1 #2 #3

7.6±0.3

0.6±0.1

9.0±0.3

5.1±0.3

7.7±0.3

6.3±0.3

3−0.5±0.1 Dia.

7.0±1.0 0.5 2.5±0.1

3.6

2.5

2.5 2.5

0.7±0.1 Depth

in mm

(

Tolerance : ±0.3

)

PV12T

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV12p100A01 0.5W(70°C) Flow/Soldering Iron 4 10ohm ±10% ±100ppm/°C

PV12p200A01 0.5W(70°C) Flow/Soldering Iron 4 20ohm ±10% ±100ppm/°C

PV12p500A01 0.5W(70°C) Flow/Soldering Iron 4 50ohm ±10% ±100ppm/°C

PV12p101A01 0.5W(70°C) Flow/Soldering Iron 4 100ohm ±10% ±100ppm/°C

PV12p201A01 0.5W(70°C) Flow/Soldering Iron 4 200ohm ±10% ±100ppm/°C

PV12p501A01 0.5W(70°C) Flow/Soldering Iron 4 500ohm ±10% ±100ppm/°C

PV12p102A01 0.5W(70°C) Flow/Soldering Iron 4 1k ohm ±10% ±100ppm/°C

PV12p202A01 0.5W(70°C) Flow/Soldering Iron 4 2k ohm ±10% ±100ppm/°C

PV12p502A01 0.5W(70°C) Flow/Soldering Iron 4 5k ohm ±10% ±100ppm/°C

PV12p103A01 0.5W(70°C) Flow/Soldering Iron 4 10k ohm ±10% ±100ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

55

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV12p203A01 0.5W(70°C) Flow/Soldering Iron 4 20k ohm ±10% ±100ppm/°C

PV12p503A01 0.5W(70°C) Flow/Soldering Iron 4 50k ohm ±10% ±100ppm/°C

PV12p104A01 0.5W(70°C) Flow/Soldering Iron 4 100k ohm ±10% ±100ppm/°C

PV12p204A01 0.5W(70°C) Flow/Soldering Iron 4 200k ohm ±10% ±100ppm/°C

PV12p504A01 0.5W(70°C) Flow/Soldering Iron 4 500k ohm ±10% ±100ppm/°C

PV12p105A01 0.5W(70°C) Flow/Soldering Iron 4 1M ohm ±10% ±100ppm/°C

PV12p205A01 0.5W(70°C) Flow/Soldering Iron 4 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (H, P, T and S).

The order quantity should be an integral multiple of the "Minimum Quantity".

■ Construction

Gear

Rotor

Terminal

Wiper

Insert

"O"-Ring

Case

Shaft

Ceramic Resistive

Element

Alumina Substrate

■ Mounting Holes

PV12H

(1) (3)

(2)

2.5

Tolerance:±0.1

in mm

PV12P/PV12S

2.5 2.5

2.5

(2)

(1)

(3)

Tolerance:±0.1

in mm

PV12T

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

56

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±2%

∆TR ±3%

∆V.S.S. ±1.5%

∆TR ±3%

∆V.S.S. ±1.5%

∆TR ±3%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

57

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV37 Series

■ Features

1. Smaller volume (about one-third) than 25-turns

potentiometer

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. 5 standard terminal styles

6. Both Top and side adjustment directions

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. OA equipment

3. Medical equipment 4. Power supply

5. Base station for cellular phone

#2

#1 #3

CLOCKWISE

#1 #2 #3

6.4

2.5

0.7

2.5

6.7

1.8±0.2 Dia.

1.2

1.1

5.0±1.0 4.0

3−0.4±0.1 Dia.

0.6±0.2

1.0

0.6

2.5

Marking

in mm

(

Tolerance : ±0.3

)

PV37P

#1#2#3

6.4 1.2

2.5

0.7

2.5

6.7

1.8±0.2 Dia.

1.1

5.0±1.0

3−0.4±0.1 Dia.

0.6±0.2

1.0

0.6

2.5

4.0

#2

#1 #3

CLOCKWISE

Marking

in mm

(

Tolerance : ±0.3

)

PV37W

#2

#1 #3

CLOCKWISE

#1#2#3

6.4

Marking

1.1

2.5

0.7

2.5

6.7

1.8±0.2 Dia.

1.1

5.0±1.0

3−0.4±0.1 Dia.

0.6±0.2

1.0

0.6

2.5

4.0

in mm

(

Tolerance : ±0.3

)

PV37X

6.4

6.75.0±1.0

1.2

3−0.4±0.1 Dia.

1.8±0.2 Dia.

0.6±0.2

#1#2#3

2.5 2.5

4.0

2.0

1.1

1.0

0.6

#2

#1 #3

CLOCKWISE

Marking

in mm

(

Tolerance : ±0.3

)

PV37Y

6.4

6.7

5.0±1.0

3−0.4±0.1 Dia.

1.8±0.2 Dia.

0.6±0.2

#1#2#32.5 2.5

4.0

2.0

1.1

0.6

1.0

#2

#1 #3

CLOCKWISE

Marking

in mm

(

Tolerance : ±0.3

)

PV37Z

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV37p100C01 0.25W(85°C) Flow/Soldering Iron 12 10ohm ±10% ±150ppm/°C

PV37p200C01 0.25W(85°C) Flow/Soldering Iron 12 20ohm ±10% ±150ppm/°C

PV37p500C01 0.25W(85°C) Flow/Soldering Iron 12 50ohm ±10% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

58

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV37p101C01 0.25W(85°C) Flow/Soldering Iron 12 100ohm ±10% ±150ppm/°C

PV37p201C01 0.25W(85°C) Flow/Soldering Iron 12 200ohm ±10% ±150ppm/°C

PV37p501C01 0.25W(85°C) Flow/Soldering Iron 12 500ohm ±10% ±150ppm/°C

PV37p102C01 0.25W(85°C) Flow/Soldering Iron 12 1k ohm ±10% ±150ppm/°C

PV37p202C01 0.25W(85°C) Flow/Soldering Iron 12 2k ohm ±10% ±150ppm/°C

PV37p502C01 0.25W(85°C) Flow/Soldering Iron 12 5k ohm ±10% ±150ppm/°C

PV37p103C01 0.25W(85°C) Flow/Soldering Iron 12 10k ohm ±10% ±150ppm/°C

PV37p203C01 0.25W(85°C) Flow/Soldering Iron 12 20k ohm ±10% ±150ppm/°C

PV37p253C01 0.25W(85°C) Flow/Soldering Iron 12 25k ohm ±10% ±150ppm/°C

PV37p503C01 0.25W(85°C) Flow/Soldering Iron 12 50k ohm ±10% ±150ppm/°C

PV37p104C01 0.25W(85°C) Flow/Soldering Iron 12 100k ohm ±10% ±150ppm/°C

PV37p204C01 0.25W(85°C) Flow/Soldering Iron 12 200k ohm ±10% ±150ppm/°C

PV37p254C01 0.25W(85°C) Flow/Soldering Iron 12 250k ohm ±10% ±150ppm/°C

PV37p504C01 0.25W(85°C) Flow/Soldering Iron 12 500k ohm ±10% ±150ppm/°C

PV37p105C01 0.25W(85°C) Flow/Soldering Iron 12 1M ohm ±10% ±150ppm/°C

PV37p205C01 0.25W(85°C) Flow/Soldering Iron 12 2M ohm ±10% ±150ppm/°C

PV37p100C31 0.25W(85°C) Flow/Soldering Iron 12 10ohm ±10% ±150ppm/°C

PV37p200C31 0.25W(85°C) Flow/Soldering Iron 12 20ohm ±10% ±150ppm/°C

PV37p500C31 0.25W(85°C) Flow/Soldering Iron 12 50ohm ±10% ±150ppm/°C

PV37p101C31 0.25W(85°C) Flow/Soldering Iron 12 100ohm ±10% ±150ppm/°C

PV37p201C31 0.25W(85°C) Flow/Soldering Iron 12 200ohm ±10% ±150ppm/°C

PV37p501C31 0.25W(85°C) Flow/Soldering Iron 12 500ohm ±10% ±150ppm/°C

PV37p102C31 0.25W(85°C) Flow/Soldering Iron 12 1k ohm ±10% ±150ppm/°C

PV37p202C31 0.25W(85°C) Flow/Soldering Iron 12 2k ohm ±10% ±150ppm/°C

PV37p502C31 0.25W(85°C) Flow/Soldering Iron 12 5k ohm ±10% ±150ppm/°C

PV37p103C31 0.25W(85°C) Flow/Soldering Iron 12 10k ohm ±10% ±150ppm/°C

PV37p203C31 0.25W(85°C) Flow/Soldering Iron 12 20k ohm ±10% ±150ppm/°C

PV37p253C31 0.25W(85°C) Flow/Soldering Iron 12 25k ohm ±10% ±150ppm/°C

PV37p503C31 0.25W(85°C) Flow/Soldering Iron 12 50k ohm ±10% ±150ppm/°C

PV37p104C31 0.25W(85°C) Flow/Soldering Iron 12 100k ohm ±10% ±150ppm/°C

PV37p204C31 0.25W(85°C) Flow/Soldering Iron 12 200k ohm ±10% ±150ppm/°C

PV37p254C31 0.25W(85°C) Flow/Soldering Iron 12 250k ohm ±10% ±150ppm/°C

PV37p504C31 0.25W(85°C) Flow/Soldering Iron 12 500k ohm ±10% ±150ppm/°C

PV37p105C31 0.25W(85°C) Flow/Soldering Iron 12 1M ohm ±10% ±150ppm/°C

PV37p205C31 0.25W(85°C) Flow/Soldering Iron 12 2M ohm ±10% ±150ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).

The order quantity should be an integral multiple of the "Minimum Quantity".

The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV37Y/PV37Z series only).

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

59

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV37p100A01

PV37p200A01

PV37p500A01

PV37p101A01

PV37p201A01

PV37p501A01

PV37p102A01

PV37p202A01

PV37p502A01

PV37p103A01

PV37p203A01

PV37p253A01

PV37p503A01

PV37p104A01

PV37p204A01

PV37p254A01

PV37p504A01

PV37p105A01

PV37p205A01

PV37p100A31

PV37p200A31

PV37p500A31

PV37p101A31

PV37p201A31

PV37p501A31

PV37p102A31

PV37p202A31

PV37p502A31

PV37p103A31

PV37p203A31

PV37p253A31

PV37p503A31

PV37p104A31

PV37p204A31

PV37p254A31

PV37p504A31

PV37p105A31

PV37p205A31

0.25(85°C)

Flow/Soldering Iron

12

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Gear Case

Terminal

Alumina Substrate

Wiper

Cermet Resistive

Element

Adjustment Screw

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

60

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Mounting Holes

PV37P

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PV37W/PV37X

(3) (1)

(2)

2.5

Tolerance ±0.1

in mm

PV37Y/PV37Z

2.5 2.5

(2)(3) (1)

Tolerance:±0.1

in mm

■ Characteristics ∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR RV100ohm ... ±3%

RG100ohm ... ±2%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

R : Standard Total Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

61

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV23 Series

■ Features

1. Small size (4.6x6.4x19.1mm) and high power rating

(0.75W at 70deg.C)

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. FAX

3. Copier 4. Printers

5. Sensors

#2

#1 #3

CLOCKWISE

#1 #2 #3

19.1

1.5

0.8

0.6

2.35 Dia.

4.6

4.9

6.4

5.0±1.0

12.7 3.3

5.1

2.5

3−0.5±0.1 Dia.

0.3

in mm

(

Tolerance : ±0.3

)

PV23P

#3#1

#2

#1 #3

CLOCKWISE

#2

19.1

1.5

0.8

0.6

2.35 Dia.

4.6

4.9

6.4

5.0±1.0

17.8 0.6

7.6

2.5

3−0.5±0.1 Dia.

0.3

in mm

(

Tolerance : ±0.3

)

PV23Y

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV23p100C01 0.75W(70°C) Flow/Soldering Iron 15 10ohm ±10% ±150ppm/°C

PV23p200C01 0.75W(70°C) Flow/Soldering Iron 15 20ohm ±10% ±150ppm/°C

PV23p500C01 0.75W(70°C) Flow/Soldering Iron 15 50ohm ±10% ±150ppm/°C

PV23p101C01 0.75W(70°C) Flow/Soldering Iron 15 100ohm ±10% ±150ppm/°C

PV23p201C01 0.75W(70°C) Flow/Soldering Iron 15 200ohm ±10% ±100ppm/°C

PV23p501C01 0.75W(70°C) Flow/Soldering Iron 15 500ohm ±10% ±100ppm/°C

PV23p102C01 0.75W(70°C) Flow/Soldering Iron 15 1k ohm ±10% ±100ppm/°C

PV23p202C01 0.75W(70°C) Flow/Soldering Iron 15 2k ohm ±10% ±100ppm/°C

PV23p502C01 0.75W(70°C) Flow/Soldering Iron 15 5k ohm ±10% ±100ppm/°C

PV23p103C01 0.75W(70°C) Flow/Soldering Iron 15 10k ohm ±10% ±100ppm/°C

PV23p203C01 0.75W(70°C) Flow/Soldering Iron 15 20k ohm ±10% ±100ppm/°C

PV23p503C01 0.75W(70°C) Flow/Soldering Iron 15 50k ohm ±10% ±100ppm/°C

PV23p104C01 0.75W(70°C) Flow/Soldering Iron 15 100k ohm ±10% ±100ppm/°C

PV23p204C01 0.75W(70°C) Flow/Soldering Iron 15 200k ohm ±10% ±100ppm/°C

PV23p504C01 0.75W(70°C) Flow/Soldering Iron 15 500k ohm ±10% ±100ppm/°C

PV23p105C01 0.75W(70°C) Flow/Soldering Iron 15 1M ohm ±10% ±100ppm/°C

PV23p205C01 0.75W(70°C) Flow/Soldering Iron 15 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P and Y).

The order quantity should be an integral multiple of the "Minimum Quantity".

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

62

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV23p100A01

PV23p200A01

PV23p500A01

PV23p101A01

PV23p201A01

PV23p501A01

PV23p102A01

PV23p202A01

PV23p502A01

PV23p103A01

PV23p203A01

PV23p503A01

PV23p104A01

PV23p204A01

PV23p504A01

PV23p105A01

PV23p205A01

0.75(70°C)

Flow/Soldering Iron

15

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Alumina Substrate

Wiper

Post

Case

Terminal

Cermet

Resistive

Element

Adjustment

Screw

■ Mounting Holes

PV23P

12.7

5.1

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PV23Y

17.8

7.6

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

63

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±3%

Temperature Cycle

Humidity

Vibration (20G)

Shock (50G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

64

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV22 Series

■ Features

1. High power rating (1W at 70 deg.C)

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. FAX

3. Copier 4. Printers

5. Sensors

#2

#1 #3

CLOCKWISE

#1(Yellow)

#2

(Red)

#3(Green)

31.8

25.4±0.2 3.2±0.2

1.7

3.0±0.2 Dia.

0.8±0.2

152 min.

6.0

4.7±0.2

5.0

1.9

8.0±0.4

Insulated standard wire

4.6

0.6±0.2

6.0

0.6±0.2

Mounting holes 2−2.5±0.2 Dia.

in mm

(

Tolerance : ±0.3

)

PV22L

#2

#1 #3

CLOCKWISE

#1#2 #3

31.8

25.4±0.2 3.2±0.2

1.7

3.0±0.2 Dia.

0.8±0.2

6.0

4.7±0.2

5.0

1.9

4.6

0.6±0.2

6.0

Mounting holes 2−2.5±0.2 Dia.

3−0.7±0.1 Dia.

17.8 6.6

22.9

8.0±0.4

7.0±1.0

in mm

(

Tolerance : ±0.3

)

PV22S

#2

#1 #3

CLOCKWISE

#1 #2 #3

31.8

25.4±0.2 3.2±0.2

1.7

3.0±0.2 Dia.

0.8±0.2

6.0

4.7±0.2

5.0

1.9

8.0±0.4

4.6

0.6±0.2

6.0

Mounting holes 2−2.5±0.2 Dia.

3−0.7±0.1 Dia.

17.8

6.6

7.6

7.0±1.0

2.5

in mm

(

Tolerance : ±0.3

)

PV22Y

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV22p100C01 1.0W(70°C) Flow/Soldering Iron 22 10ohm ±10% ±100ppm/°C

PV22p200C01 1.0W(70°C) Flow/Soldering Iron 22 20ohm ±10% ±100ppm/°C

PV22p500C01 1.0W(70°C) Flow/Soldering Iron 22 50ohm ±10% ±100ppm/°C

PV22p101C01 1.0W(70°C) Flow/Soldering Iron 22 100ohm ±10% ±100ppm/°C

PV22p201C01 1.0W(70°C) Flow/Soldering Iron 22 200ohm ±10% ±100ppm/°C

PV22p501C01 1.0W(70°C) Flow/Soldering Iron 22 500ohm ±10% ±100ppm/°C

PV22p102C01 1.0W(70°C) Flow/Soldering Iron 22 1k ohm ±10% ±100ppm/°C

PV22p202C01 1.0W(70°C) Flow/Soldering Iron 22 2k ohm ±10% ±100ppm/°C

PV22p502C01 1.0W(70°C) Flow/Soldering Iron 22 5k ohm ±10% ±100ppm/°C

PV22p103C01 1.0W(70°C) Flow/Soldering Iron 22 10k ohm ±10% ±100ppm/°C

PV22p203C01 1.0W(70°C) Flow/Soldering Iron 22 20k ohm ±10% ±100ppm/°C

PV22p503C01 1.0W(70°C) Flow/Soldering Iron 22 50k ohm ±10% ±100ppm/°C

PV22p104C01 1.0W(70°C) Flow/Soldering Iron 22 100k ohm ±10% ±100ppm/°C

PV22p204C01 1.0W(70°C) Flow/Soldering Iron 22 200k ohm ±10% ±100ppm/°C

PV22p504C01 1.0W(70°C) Flow/Soldering Iron 22 500k ohm ±10% ±100ppm/°C

PV22p105C01 1.0W(70°C) Flow/Soldering Iron 22 1M ohm ±10% ±100ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

65

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV22p205C01 1.0W(70°C) Flow/Soldering Iron 22 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 150 °C

The blank column is filled with the code of adjustment direction and lead type (L, S and Y).

The order quantity should be an integral multiple of the "Minimum Quantity".

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV22p100A01

PV22p200A01

PV22p500A01

PV22p101A01

PV22p201A01

PV22p501A01

PV22p102A01

PV22p202A01

PV22p502A01

PV22p103A01

PV22p203A01

PV22p503A01

PV22p104A01

PV22p204A01

PV22p504A01

PV22p105A01

PV22p205A01

1.0(70°C)

Flow/Soldering Iron

22

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Case

Adjustment

Screw Post

Wiper

Alumina

Substrate

Terminal

Cermet

Resistive

Element

■ Mounting Holes

PV22S

17.8

22.9

(2) (1) (3)

Tolerance:±0.1

in mm

PV22Y

17.8

7.6

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

66

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

Temperature Cycle

Humidity

Vibration (20G)

Shock (50G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

67

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV36 Series

■ Features

1. High resolution 25-turns enables precision

adjustment easily.

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. 5 standard terminal styles

6. Both Top and side adjustment directions.

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. OA equipment

3. Medical equipment 4. Power supply

5. Base station for cellular phone

2.5 2.5

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

#1 #2

9.6

#3

1.3

1.2

3-0.5±0.1 Dia.

6.0±1.0 5.0

Marking

0.7

1.3

10.0

2.55.2

0.5

2.0 Dia.

0.6

PV36P

2.5 2.5

2.5

#1#2#3

9.6

1.3

10.0

0.5

3-0.5±0.1 Dia.

6.0±1.0

2.0 Dia.

0.6

1.2

1.3

0.7

Marking

5.0

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

PV36W

#1#2#3

1.3

5.0

9.6

10.0

0.5

2.0 Dia.

0.6

1.3

0.7

3-0.5±0.1 Dia.

6.0±1.0

2.5 2.5

2.5

1.2 Marking

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

PV36X

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

2.5 2.5

2.51.2

#1

#2#3

9.6

10.0

0.5

3-0.5±0.1 Dia.

6.0±1.0

2.0 Dia.

0.6

1.3

0.7

1.2

Marking

5.0

1.3

PV36Y

1.3

9.6

2.0 Dia.

0.6

1.3

0.7

1.2 Marking

10.0

0.5

6.0±1.0

#1#2#3

3-0.5±0.1 Dia.

2.5 2.5

Clockwise

(in mm)

(Tolerance : ±0.3)

5.0

2.51.2

#2

#3#1

(Wiper)

PV36Z

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV36p100C01 0.5W(70°C) Flow/Soldering Iron 25 10ohm ±10% ±150ppm/°C

PV36p200C01 0.5W(70°C) Flow/Soldering Iron 25 20ohm ±10% ±150ppm/°C

PV36p500C01 0.5W(70°C) Flow/Soldering Iron 25 50ohm ±10% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

68

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV36p101C01 0.5W(70°C) Flow/Soldering Iron 25 100ohm ±10% ±150ppm/°C

PV36p201C01 0.5W(70°C) Flow/Soldering Iron 25 200ohm ±10% ±100ppm/°C

PV36p501C01 0.5W(70°C) Flow/Soldering Iron 25 500ohm ±10% ±100ppm/°C

PV36p102C01 0.5W(70°C) Flow/Soldering Iron 25 1k ohm ±10% ±100ppm/°C

PV36p202C01 0.5W(70°C) Flow/Soldering Iron 25 2k ohm ±10% ±100ppm/°C

PV36p502C01 0.5W(70°C) Flow/Soldering Iron 25 5k ohm ±10% ±100ppm/°C

PV36p103C01 0.5W(70°C) Flow/Soldering Iron 25 10k ohm ±10% ±100ppm/°C

PV36p203C01 0.5W(70°C) Flow/Soldering Iron 25 20k ohm ±10% ±100ppm/°C

PV36p253C01 0.5W(70°C) Flow/Soldering Iron 25 25k ohm ±10% ±100ppm/°C

PV36p503C01 0.5W(70°C) Flow/Soldering Iron 25 50k ohm ±10% ±100ppm/°C

PV36p104C01 0.5W(70°C) Flow/Soldering Iron 25 100k ohm ±10% ±100ppm/°C

PV36p204C01 0.5W(70°C) Flow/Soldering Iron 25 200k ohm ±10% ±100ppm/°C

PV36p254C01 0.5W(70°C) Flow/Soldering Iron 25 250k ohm ±10% ±100ppm/°C

PV36p504C01 0.5W(70°C) Flow/Soldering Iron 25 500k ohm ±10% ±100ppm/°C

PV36p105C01 0.5W(70°C) Flow/Soldering Iron 25 1M ohm ±10% ±100ppm/°C

PV36p205C01 0.5W(70°C) Flow/Soldering Iron 25 2M ohm ±10% ±100ppm/°C

PV36p100C31 0.5W(70°C) Flow/Soldering Iron 25 10ohm ±10% ±150ppm/°C

PV36p200C31 0.5W(70°C) Flow/Soldering Iron 25 20ohm ±10% ±150ppm/°C

PV36p500C31 0.5W(70°C) Flow/Soldering Iron 25 50ohm ±10% ±150ppm/°C

PV36p101C31 0.5W(70°C) Flow/Soldering Iron 25 100ohm ±10% ±150ppm/°C

PV36p201C31 0.5W(70°C) Flow/Soldering Iron 25 200ohm ±10% ±100ppm/°C

PV36p501C31 0.5W(70°C) Flow/Soldering Iron 25 500ohm ±10% ±100ppm/°C

PV36p102C31 0.5W(70°C) Flow/Soldering Iron 25 1k ohm ±10% ±100ppm/°C

PV36p202C31 0.5W(70°C) Flow/Soldering Iron 25 2k ohm ±10% ±100ppm/°C

PV36p502C31 0.5W(70°C) Flow/Soldering Iron 25 5k ohm ±10% ±100ppm/°C

PV36p103C31 0.5W(70°C) Flow/Soldering Iron 25 10k ohm ±10% ±100ppm/°C

PV36p203C31 0.5W(70°C) Flow/Soldering Iron 25 20k ohm ±10% ±100ppm/°C

PV36p253C31 0.5W(70°C) Flow/Soldering Iron 25 25k ohm ±10% ±100ppm/°C

PV36p503C31 0.5W(70°C) Flow/Soldering Iron 25 50k ohm ±10% ±100ppm/°C

PV36p104C31 0.5W(70°C) Flow/Soldering Iron 25 100k ohm ±10% ±100ppm/°C

PV36p204C31 0.5W(70°C) Flow/Soldering Iron 25 200k ohm ±10% ±100ppm/°C

PV36p254C31 0.5W(70°C) Flow/Soldering Iron 25 250k ohm ±10% ±100ppm/°C

PV36p504C31 0.5W(70°C) Flow/Soldering Iron 25 500k ohm ±10% ±100ppm/°C

PV36p105C31 0.5W(70°C) Flow/Soldering Iron 25 1M ohm ±10% ±100ppm/°C

PV36p205C31 0.5W(70°C) Flow/Soldering Iron 25 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).

The order quantity should be an integral multiple of the "Minimum Quantity".

The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV36W/PV36X series only).

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

69

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV36p100A01

PV36p200A01

PV36p500A01

PV36p101A01

PV36p201A01

PV36p501A01

PV36p102A01

PV36p202A01

PV36p502A01

PV36p103A01

PV36p203A01

PV36p253A01

PV36p503A01

PV36p104A01

PV36p204A01

PV36p254A01

PV36p504A01

PV36p105A01

PV36p205A01

PV36p100A31

PV36p200A31

PV36p500A31

PV36p101A31

PV36p201A31

PV36p501A31

PV36p102A31

PV36p202A31

PV36p502A31

PV36p103A31

PV36p203A31

PV36p253A31

PV36p503A31

PV36p104A31

PV36p204A31

PV36p254A31

PV36p504A31

PV36p105A31

PV36p205A31

0.5(70°C)

Flow/Soldering Iron

25

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Adjustment Screw

Case

Alumina Substrate

Terminal

Wiper

Cermet Resistive Element

Gear

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

70

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Mounting Holes

PV36P

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PV36W/X

2.5 2.5

(2)(3) (1)

Tolerance:±0.1

in mm

PV36Y/Z

(3) (1)

(2)

2.5

Tolerance ±0.1

in mm

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR

RV1kohm, RU500kohm ... ±5%

1kohmFRF500kohm ... ±3%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

R : Standard Total Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PV12/PV37/PV23/PV22/PV36 Series Notice

71

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Standard soldering condition

(a) Flow soldering :

>Pre-heating temp. 80-100 deg. C

>Soldering temp. 260 deg. C max.

>Soldering time 3 sec. max.

(b) Soldering iron :

>Temperature of tip 300 deg. C max.

>Soldering time 3 sec. max.

>Wattage of iron 40W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

(2) To minimize mechanical stress when adjusting,

the trimmer potentiometer should be mounted onto

PCB without gap.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

2. Mounting

(1) Use PCB hole to meet the pin of the trimmer

potentiometer. If the trimmer potentiometer

installs into insufficient PCB hole, the

trimmer potentimeter may be damaged by

mechanical stress.

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

>Power: 600W (67 liter) max.

>Frequency: 28kHz

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

cleaning compatibility usually depends on the jig

construction and/or the cleaning condition such

as the depth of immersion, please check the

cleaning equipment to determine the suitable

conditions.

If the trimmer potentiometer is cleaned by

other conditions, the trimmer potentiometer may

be damaged.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PV12/PV37/PV23/PV22/PV36 Series Notice

72

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdriver for manual adjustment

ENGINEER INC. : DA-40

(Murata P/N : KMDR180)

We can supply the screwdrivers above.

If you place order, please specify the Murata P/N.

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. When adjusting with an adjustment tool, the applied

force to the adjustment screw should not exceed

4.9N (Ref.; 500gf). If excessive force is applied,

the trimmer potentiometer may not function due to

damage.

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

73

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series

■ Features

1. Dust-proof construction protects the interior from

dust, which maintains stable characteristics.

2. Compliant to high peak temperature lead free

soldering.

3. Excellent resistance materials and high reliability

wiper achieves 1M cycles.

4. D formation thru-hole rotor enables selection of

any kind of gear shape.

5. Leaded terminal type is available.

6. Ultra-thin size (2.1mm height)

7. Au plated terminals without Lead.

■ Applications

1. Animal robot

2. Switch for automotive

3. Motor drive unit

4. Radio control equipment

5. Electric motor-driven bicycle

6.5

12.0

#2

#1 #3

11.0

C1.0

#2

50°

5.5

2-R0.05rib

2.1 0.6

C0.2 max.

C0.15 max.

0.5 rib

1.0

0.2

R0.2

1.5±0.1

5.5

8.214.9

5.0

4-1.6 Dia.

4.5

7.5

4-0.8±0.1

8.5±0.1

5.0

4.0 -0 Dia.

+0.1

5.0 -0.1Dia.

+0

3.0 -0

+0.1

2-1.00 -0.10 Dia.

+0.05

(D formation

thru-hole length)

(in mm)

(Tolerance: ±0.3)

PVS1A

6.5

12.0

#2

#1 #3

11.0

C1.0

#2

2.0

50°

5.5

2-R0.05rib

2.9

0.8 3.5

0.5 rib

1.0

0.2

R0.2

1.5±0.1

4.0 -0 Dia.

+0.1

3.0 -0

+0.1

4-1.0 Dia.

0.20±0.03

4-1.6 Dia. 6.9 5.4

(D formation

thru-hole length)

(in mm)

(Tolerance: ±0.3)

5.0

3.0

7.5

4-0.8±0.2

5.0

2.52.5

Mounting Face

PVS1L

Part Number Total Resistance Value

(k ohm) Linearity

(%) Effective Rotational Angle TCR Rotational Life

PVS1A103A01

(SV01A103AEA01) 10 ±30% ±2 333.3° (Ref.) ±500ppm/°C 1M cycles

PVS1L103A03

(SV01L103AEA11) 10 ±30% ±2 333.3° (Ref.) ±500ppm/°C 1M cycles

PVS1 series will be changed to new part number "SV01" since Oct. 1, 2004.

■ Construction

PVS1A

#3 Terminal

#2 Terminal

#1 Terminal

Wiper

Resistive Element

Resin Substrate

Rotor

#2 Terminal

Cover

PVS1L

Wiper

Resistive Element

Resin Substrate

Rotor

#2 Terminal

Cover

#3 Terminal

#2 Terminal

#1 Terminal

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

74

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Standard Land Pattern

PVS1A

7.2

5.2

6.7

8.7

4-1.8

5.0

(8.5)

(5.5)

(1.1)

(in mm)

(Tolerance: ±0.1)

(5.8 Dia.)

■ Standard Mounting Holes

PVS1L

2.52.5

5.0

5.57.0

4-1.0 Dia.

+0.1

-0

(in mm)

(Tolerance : ±0.1)

■ Characteristics ∆TR ±20%

Linearity ±3%

∆TR ±20%

Linearity ±3%

∆TR ±10%

Linearity ±3%

∆TR ±10%

Linearity ±3%

∆TR ±20%

Linearity ±3%

∆TR +5/-30%

Linearity ±3%

∆TR ±20%

Linearity ±3%

∆TR ±20%

Linearity ±3%

∆TR: Total Resistance Change

Temperature Cycle

(Thermal Shock)

Humidity

Vibration

Shock (20G)

Humidity Load Life

High Temperature

Exposure

Low Temperature

Exposure

Rotational Life

(1M cycles)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVS1 Series Notice

75

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. Do not use the rotary position sensor under the

following environmental conditions. If you use

the rotary position sensor in an environment other

these listed below, please consult with Murata

factory representative prior to using.

(1) Corrosive gasses atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Water, Oil, Medical liquid, Organic

solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Soldering and Mounting)-PVS1A Type

1. Soldering

(1) PVS1A series can be soldered by reflow soldering

method and soldering iron. Do not use flow

soldering method (dipping).

(2) The dimension of land pattern used should be

Murata's standard land pattern at reflow

soldering. Excessive land area may cause

displacement due to the effect of the surface

tension of the solder. Insufficient land area

may cause insufficient soldering strength on PCB.

(3) Standard soldering condition

(a) Reflow soldering : Refer to the standard

temperature profile.

(b) Soldering iron:

>Temperature of tip 360 deg. C max.

>Soldering time 3 sec. max./1 terminal

>Diameter 3mm max.

>Wattage of iron 30W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the rotary position sensor may deviate from the

specified characteristics.

(4) The amount of solder is critical. Insufficient

amounts of solder can lead to insufficient

soldering strength on PCB. Excessive amounts of

solder may cause bridging between the

terminals.

(5) The soldering iron should not come in contact

with the cover of the rotary position sensor. If

such contact does occur, the rotary position

sensor may be damaged.

2. Mounting

(1) Do not apply excessive force (preferable 9.8N

(Ref.; 1kgf) max.), when the rotary position

sensor is mounted to the PCB.

(2) Do not warp and/or bend PCB to prevent the rotary

position sensor from breakage.

3. Cleaning

Cannot be cleaned because of open construction.

■ Notice (Soldering and Mounting)-PVS1L Type

1. Soldering

(1) PVS1L series can be soldered by flow soldering

method and soldering iron. Do not use reflow

soldering method.

(2) Standard soldering condition

(a) Flow soldering

>Pre-haeting temp.: 80-100 deg. C

>Soldering temp. : 260 deg. C max.

>Soldering time : 3 sec. max.

(b) Soldering iron

>Temperature of tip: 360 deg. C max.

>Soldering time : 3 sec. max./1 terminal

>Diameter : 3mm max.

>Wattage of iron : 30W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the rotary position sensor may deviate from the

specified characteristics.

(3) The amount of solder is critical.

(4) The soldering iron should not come in contact

with the cover of the rotary position sensor. If

such contact does occur, the rotary position

sensor may be damaged.

2. Mounting

(1) Use PCB hole to meet the pin of the rotary

position sensor. If the rotary position sensor

is installed into insufficient PCB hole, the

rotary position sensor may be damaged by

mechanical stress.

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the rotary position

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PVS1 Series Notice

76

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

sensor is mounted to the PCB.

3. Cleaning Cannot be cleaned because of open construction.

■ Reflow Soldering Standard Profile

Pre-heating in air Soldering Gradual cooling

in air

0

100

150

200

230

260

Temperature (°C)

60-120 sec. 40 sec. max.

(Melting zone)

Time

■ Notice (Handling)

Uncontrolled mechanical force except usual rotation on

the hollow rotor of product, may cause big change of

electrical characteristic, big increase of rotational

torque or mechanical damage of product.

Therefore, please pay your attention on the following

points for your design.

1. The fixing method of product must be soldering by

the terminals of product. And please don't fix by

screw cramping of supporting board which might

cause mechanical deformation of product.

2. Your connecting shaft must be sustained by your

bearing and any uncontrolled force should not

apply on the hollow rotor of product.

■ Notice (Other)

1. Please make sure the connecting impedance is not to

be less than 10M ohm. The rotary position sensor

is designed to connect the output terminal and A/D

port of the microprocessor directly. Therefore,

connecting impedance presupposes certain M ohm and

the contact resistance is set high.

2. To minimize the processing error and noise

influence which occur in rare cases, when data is

installed through the product, please note the

following items and program your software.

(1) Data install should be done plural times and

applied the mean value.

(2) Data considered as error should be invalid.

(3) If suspicious data is found, the data should be

re-installed.

3. Before using rotary position sensor, please test

after assembly in your particular mass production

system.

4. MURATA cannot guarantee rotary position sensor

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

No.

Item Test Methods

Total Resistance1

Measure total resistance between the resistance element and terminals (terminals #1 and #3) with the contact arm

positioned against a stop. The positioning of the contact arm and terminal should be the same for subsequent total

resistance measurements on the same device.

Use the test voltage specified in Table-1 for total resistance measurements. This voltage should be used whenever a

subsequent total resistance measurement is made.

Specifications and Test Methods

Residual Resistance2

Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance

between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-

wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-

minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not

exceeded.

Contact Resistance3

4

1

Total Resistance,

Nominal (ohm)

10VRV100

100FRV1k

1kFRV10k

10kFRV100k

100kFR

1.0

Maximum Test

Voltage (V)

Rx

#1

#2

#3

Proofread

Resistence AC

Amplifier

Oscilloscope

Rx : Trimmer Potentiometer

Oscilloscope bandwidth :100Hz to 50kHz

Constant Current

Source

(Test current

shown in Table 2)

Figure 1: CRV measuring circuit

Table 1: Total resistance test voltage

3.0

10.0

30.0

100.0

Contact resistance variation should be measured with the measuring circuit shown below, or its equivalent. The

operating wiper should be rotated in both directions through 90% of the actual effective-electrical travel for a total of

6 cycles.

The rate of rotation of the operating wiper should be such that the wiper completes 1 count in determining whether or

not a contact resistance variation is observed at least twice in the same location. The test current should follow the

value given in Table-2 unless otherwise limited by the power rating.

Standard Total

Resistance R (ohm)

100VRF10k

10kVRF100k

100kVR

10mA max.

Test Current

Table 2: Test current for CRV

1mA max.

100µA max.

Humidity Exposure The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 40±2°C and 90 - 95% without loading for 500±12 hours.

The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.

5High Temperature

Exposure

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 70±2°C without loading for 500±12 hours. The resistance value should be

measured after keeping the potentiometer in a room for 1.5±1/6 hours.

6Humidity Load Life

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 40±2°C and 90 - 95% with loading the 1/2 rated voltage between #1 and

#2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12hours.

The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.

7 Load Life

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 70±2°C (50±2°C for PVZ) with loading the 1/2 rated voltage between #1

and #2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12 hours. The resistance value should be

measured after keeping the potentiometer in a room for 1.5±1/6 hours.

The tests and measurements should be conducted under the condition of 15 to 35°C of temperature, 25 to 75% of relative humidity and 86 to 106 kpa of

atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned

conditions, the tests and measurements should be conducted under the condition of 25±2°C of temperature and, 45 to 55% of relative humidity and 86 to

106 kpa of atmospheric pressure.

8 Temperature Cycle

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be subjected to Table 3,Table 4 temperature for 5 cycles. The resistance value should be measured

after keeping the potentiometer in a room for 1.5±10 minutes.

Sequence

Temp. (°C) -25±3

1

Table 3: PVZ

Time (min.) +25±2

23

+85±3 +25±2

4

30±3 10max.

Sequence

Temp. (°C) -55±3

1

Table 4: PVA3/PVS3/PVM4A---C01

Time (min.) 30±3 +25±2

2

10max.

3

+125±3 +25±2

4

30±3 10max.

Continued on the following page.

10max.30±3

SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods

77

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Specifications and Test Methods

The trimmer potentiometer should be subjected to each of the following temperatures (see Table 5, Table 6) for 30

to 45 minutes. The resistance value should be measured in the chamber.

TCR= Z106(ppm/°C)

T1: Reference temperature in degrees celsius

T2: Test temperature in degrees celsius

R1: Resistance at reference temperature in ohm

R2: Resistance at test temperature in ohm

R2– R1

R1(T2– T1)

The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per

minute, for 10 cycles continuously. The resistance value should be measured after keeping the potentiometer in a

room for 10±5 minutes.

Sequence

Temp. (°C) +25±2

1*

Table 5: PVZ

-25±3

23*

+25±2 +85±3

4

No.

Item Test Methods

Temperature Coefficient of

Resistance

Rotational Life

9

10

Sequence

Temp. (°C) +25±2

1

Table 6: PVA3/PVS3/PVM4A---C01

-55±3

23*

+25±2 +125±3

4

Continued from the preceding page.

Note*: Norm temp.

SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods

78

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

No.

Item Test Methods

Total Resistance1

Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned

against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance

measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements.

This voltage should be used for all subsequent total resistance measurements.

Specifications and Test Methods

Residual Resistance2

Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance

between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-

wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-

minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not

exceeded.

Contact Resistance

Variation

3

4

1

5

Rx

#

1

#

2

#

3

Constant Current Source

(Test current shown in Table2) Proofread

Resistance AC

Amplifier

Oscilloscope

Oscilloscope bandwidth :100Hz to 50kHz

Rx : Trimmer Potentiometer

Figure 1: CRV measuring circuit

Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The

adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational

angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a

contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points

where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the

adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum

to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by

power rating.

Standard Total Resistance

R (ohm)

RV100

100FRF500

500VRF1k

1kVRF2k

2kVRF50k

50kVRF200k

200kVRF1M

1MVRF2M

2MVR

20mA

Test Current

Table 2: Test current for CRV

10mA

4mA

Temperature Coefficient of

Resistance

The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45 min-

utes. Temperature coefficient of resistance should be applied to the following formula.

TCR= Z106(ppm/°C)

T1: Reference temperature in degrees celsius

T2: Test temperature in degrees celsius

R1: Resistance at reference temperature ohm

R2: Resistance at test temperature in ohm

R2– R1

R1(T2– T1)

Voltage Setting

Stability

The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An

adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1

and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the

following formula.

Voltage setting stability=

(

–

)

Z100 (%)

e : Before test

(The voltage between terminal #1 and terminal #2)

e': After test

(The voltage between terminal #1 and terminal #2)

E: The voltage between terminal #1 and terminal #3

e

E

e'

E

The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification

for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts).

2mA

1mA

200µA

100µA

50µA

30µA

e#2

#1 #3

E

Figure 2

Total Resistance,

Nominal (ohm)

10VRV100

100FRV1k

1kFRV10k

10kFRV100k

100kFR

1.0

Maximum Test

Voltage (V)

Table 1: Total resistance test voltage

3.0

10.0

30.0

100.0

Sequence

Temperature (°C) +25

1*

Table 3: Test temperatures

-15

23

Min. operating

Temperature +25

4*

Note*: Reference temperature

+65

56

Max. operating

Temperature

Continued on the following page.

SMD Sealed Type/Lead Sealed Type Specifications and Test Methods

79

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

No.

Item Test Methods

Temperature Cycle6

The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer

should be removed from the chamber, and maintained at a temperature of 25±5°C for 1~2 hours.

Specifications and Test Methods

Humidity7

1) PVC6, PV12, PV32, PV34 PVM4A---D01 series

The trimmer potentiometer should be placed in a chamber at a temperature of 40±2°C and a humidity of 90~95%

without loading for 250±8 hours (500±12 hours for PVM4A---D01 series). The trimmer potentiometer should be

removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours.

2) PVF2 series

The trimmer potentiometer should be placed in a chamber at 60±2°C and 90~95% without loading for 1000±12

hours. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C

for 5±1/6 hours

2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37 series

The trimmer potentiometer should be subjected Figure-3 the programmed humidity environment for 10 cycle. The trim-

mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1.5±1/2

hours.

1

Vibration8

1) PV-- series

The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete frequen-

cy range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the three

axis direction for a total of 12 sweeps.

2) PVF2 series

The trimmer potentiometer should be subjected to vibration at 0.3 inch amplitude. The frequency should be varied

uniformly between the approximate limits of 10Hz and 55Hz. This motion should be applied for period of 2 hours in

each of 3 mutually perpendicular directions (total of 6 hours).

Sequence

Temp.

(°C)

PV-- series

PV22 series

PVF2 series

1

Table 4: One cycle of temperature cycle.

-55±3

-25±3

2

+25±2

Time (min.) 30 5 max.

3

+125±3

+150±3

+60±3

30

4

+25±2

5 max.

Continued from the preceding page.

INITIAL CONDITIONING

IN A DRY OVEN

24 HOURS

INITIAL MEASUREMENTS

AS SPECIFIED IN 3.2 CIRCULATION OF CONDITIONING AIR SHOULD

BE AT A MINIMUM CUBIC RATE PER MINUTE

EQUIVALENT TO 5 TIMES THE VOLUME OF

THE CHAMBER

22 23 242120191817161514131211109876543210

70

65

60

55

50

45

40

35

30

25

20

15

10

5

-5

-10

0

ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3

PRIOR TO FIRST CYCLE

UNLESS OTHERWISE

SPECIFIED STEP 7STEP 6STEP 5STEP 4STEP 3STEP 2STEP 1

UNLESS OTHERWISE SPECIFIED

TEMPERATURE TOLERANCE IS,

±2°C AT ALL POINTS WITHIN THE

CHAMBER EXCEPT THE IMMEDIATE

VICINITY OF THE SPECIMENS AND

THE CHAMBER SURFACES STEP 7a

STEPS 7a AND 7b PERFORMED DURING ANY

5 OF THE FIRST 9 CYCLES. HUMIDITY

UNCONTROLLED DURING STEPS 7a AND 7b

ONLY

VOLTAGE APPLIED AS SPECIFIED IN 3.5

STEP 7b

END OF FINAL CYCLE

MEASUREMENTS AS

SPECIFIED IN 3.6

+10°C

-2°C

HUMIDITY

UNCONTROLLED

RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.

HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED

TO RADIANT HEAT FROM CHAMBER-CONDITIONING

PROCESSES

90-98%RH 80-98%RH 90-98%RH 80-98%RH 90-98%RH

TEMPERATURE (DEGREES CELSIUS)

MIL-STD-202 METHOD 106

Figure 3

Shock9

1) PV-- series

The trimmer potentiometer should be shocked at the 100G (50G for PV22 and PV23 series) level and should be

subjected to 4 shocks in each of the three axis directions for a total of 12 shocks.

2) PVM4A---D01 series

The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the

six axis directions for a total of 18 shocks.

Temperature Road Life10

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently

between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of

1000±12 hours, at a temperature of 70±2°C (85±2°C for PV01 and PV37 series, 50±2°C for PVF2 series). The trim-

mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours.

High Temperature Exposure

(Except for PVF2)

11 The trimmer potentiometer should be placed in a chamber at a temperature of 125±3°C (150±3°C for PV22 series)

250±8 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a

temperature of 25±5°C for 1 to 2 hours.

Low Temperature Exposure

(Except for PVF2 and

PVM4A---D01)

12

The trimmer potentiometer should be placed in a chamber at a temperature of -55±3°C for 1 hours without loading.

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes.

The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for

approximately 24 hours.

Continued on the following page.

SMD Sealed Type/Lead Sealed Type Specifications and Test Methods

80

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Specifications and Test Methods

Resistor 1

End Terminal End Terminal Resistor 2 End TerminalEnd Terminal

DC supply

Figure 4

No.

Item Test Methods

Low Temperature Operation

(Only for PVF2 and

PVM4A---D01)

13 The trimmer potentiometer should be placed in a chamber at a temperature of -25±3°C (-55±3°C for PVM4A---

D01 series) 48±4 hours without loading. The trimmer potentiometer should be removed from the chamber, and main-

tained at a temperature of 25±5°C for 1-2 hours

Continued from the preceding page.

Rotational Life14

1)PV-- series

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit

shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of effec-

tive-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maxi-

mum for total of 200 cycles.

2) PVG3, PVG5 series

The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical rotation-

al angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50

(100 for PVG5) cycles, without loading.

3) PVF2, PVM4A---D01 series

The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per

minute, for 100 cycles continuously.

SMD Sealed Type/Lead Sealed Type Specifications and Test Methods

81

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

No. Item Test Methods

Independent linearity should vary no more than ±2% within ±160° to 50% voltage ratio.

Taper : linear, 100%/333.3° Measured with the circuit as below (Figure 1).

Linearity1

The rotary position sensor should be subjected to each of the following temperatures (see Table 1) for 30-45 minutes.

Temperature coefficient of resistance should be applied to the following formula.

TCR= Z106(ppm/°C)

t1: Reference temperature in degrees celsius

t2: Test temperature in degrees celsius

R1: Resistance at reference temperature in ohm

R2: Resistance at test temperature in ohm

Note * : Reference temperature

R2– R1

R1(t2– t1)

Temperature

Coefficient of

Resistance

2

Guarantee limit for linearity

100%

50%

100% / 333.3°

-160°0°+160°

0%

CCW CW

Rotational angle (°)

Output voltage ratio (%)

V (1-2)

V (1-3) X100

GND (#1)

Connection Impedance : 1M ohm min.

DC5V (#3)

Output (#2)

Figure-1

Sequence

Temperature (°C) +25

*1 -40

2+25

*3 +85

4

The rotary position sensor should be subjected to Table 2 temperature for 5 cycles.

Then, the rotary position sensor should be kept in the dry box for 24 +8/-0 hrs.

Temperature

Cycle

(Thermal Shock)

3

The rotary position sensor should be stored in a chamber at temperature of +60±2°C and relative Humidity of 90-95% for 250±8

hrs. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.

Humidity4

The rotary position sensor should be tested under the condition of the amplitude of 1.5mm, the frequency range from 10 to 55Hz

(should be traversed in approximately one minute) and 2 hours in each of 3 mutually perpendicular directions (total 6 hours).

Then, the rotary position sensor should be kept in the dry box for 1-2 hrs.

Vibration5

The rotary position sensor should be tested under the condition of the peak acceleration 20G max. in half-sine wave and 5 shocks

in each of 3 mutually perpendicular directions (total 15 shocks). Then, the rotary position sensor should be kept in the dry box for

1-2 hrs.

Shock6

Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of

the rotary position sensor, 1.5 hours on and 0.5 hours off, for 96±4 hours in total in a chamber at a temperature of +40±2°C and

relative humidity of 90-95%. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-

0 hours.

Humidity Load

Life

7

The rotary position sensor should be stored in a chamber at the temperature of +85±3°C without loading for 250±8 hours. After

removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.

High Temp.

Exposure

8

The rotary position sensor should be stored in a chamber at the temperature of -40±3°C without loading for 168±4 hours. After

removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.

Low Temp.

Exposure

9

The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of one cycle for

6 seconds for 1 Million cycles under the condition of +25±2°C of temperature without loading.

Rotational Life10

Sequence

Temperature (°C)

Time (min.) -40±3

30

1+25±2

5 max.

2+85±3

30

3+25±2

5 max.

4

Table-1 Test temperatures

Table 2: One cycle of temperature cycle

Angle Sensing Potentiometer Specifications and Test Methods

82

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Packaging

83

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Minimum Quantity

Part Number Minimum Quantity (pcs.)

PVZ2A

PVZ2K

PVZ3A

PVZ3K/R

PVS3

PVA3

PVG3A/G

PVG3K

PVM4

PVF2A

PVG5A

PVG5H

PV01W

PV01P

PV01X

PVC6A/D/G/H/E

PVC6M/Q

PV34

PV32

PV23/12

PV22

PV36W

PV36Y

PV36X

PV36Z/P

PV37Y/Z

PV37W/X/P

PVS1A

PVS1L

3000

2000

1500

2500

2000

1000

500

250

500

—

ø180mm reel

12000

—

8000

—

8000

—

3000

—

1000

—

ø330mm reel

—

1000

—

1000

—

1000

—

1000

—

Ammo Pack

—

50

—

50

40

—

Magazine

1000

500

—

500

100

50

—

50

100

50

30

50

—

Bulk

—

1000

Tray

■ Dimensions of Reel

2.0±0.5

21.0±0.8 dia.

13.0±0.5 dia.

50 dia.min.

2.0±0.5 (PVG5A—1.0±0.5)

* 10.0±1.5 ( 8mm Width) — PVZ2A, PVZ3A, PVS3, PVA3, PVF2

14.0±1.5 (12mm Width) — PVG5H, PVG3, PVZ2K, PVZ3K, PVZ3R, PVM4

17.0±1.5 (16mm Width) — PVG5A

178±2 dia.

(in mm)

*

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Packaging

84

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Dimensions of Reel

PVS1

2.0±0.5

13.0±0.5 Dia.

21.0±0.8 Dia.

328±2 Dia.

80 min.

2.0±0.5

25.5±1.0

(in mm)

■ Dimensions of Plastic Tape

Part Number

PVZ2A

PVZ2K

PVZ3A/PVA3

PVZ3K

PVZ3R

PVS3

PVF2

2.4±0.1

3.3±0.2

2.3±0.2

(in mm)

A

3.1±0.1

5.7±0.1

3.8±0.2

5.8±0.2

6.5±0.2

4.1±0.2

2.3±0.2

B

8.0±0.2

12.0±0.1

8.0±0.2

12.0±0.2

8.0±0.2

C

3.5±0.1

5.5±0.1

3.5±0.1

5.5±0.1

3.5±0.1

D

1.1±0.1

1.95±0.1

2.3±0.1

2.1±0.1

1.6±0.1

2.3±0.1

I

0.2±0.1

0.3±0.1

0.2±0.1

0.3±0.1

0.2±0.1

0.3±0.1

J

a

a'

4.0

±

0.1

2.0±0.1

4.0

±

0.1

1.5 dia.

+0.1

–0

1.75±0.1

DC

A

B

JI

Across a – a'

Tape feeding direction

• The side containing terminals #1 and #3 faces the plastic tape pilot holes.

PVZ2 / PVZ3 / PVA3 / PVS3 / PVF2

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Packaging

85

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Dimensions of Plastic Tape

Part Number

PVG3A

PVG3G

PVM4

PVG5H

4.0±0.1

4.5±0.2

5.4±0.2

A

4.0±0.1

4.9±0.1

5.5±0.2

5.8±0.2

B

2.1±0.1

2.15±0.1

4.0±0.1

I

0.3±0.1

0.4±0.1

J

(in mm)

• The side containing terminals #1 and #3 faces the plastic tape pilot holes

(except PVG3).

PVG3A / PVG3G / PVM4 / PVG5H

JI

Across a – a'

12.0±0.2

5.5

±

0.1

1.75±0.1

2.0±0.1

8.0±0.1

a

B

A

Tape feeding direction

a'

4.0±0.1 1.5 dia.

+0.1

–0

Part Number

PVG5A 4.3±0.2

A

5.4±0.2

B

5.4±0.1

I

0.4±0.1

J

(in mm)

PVG5A

JI

Across a – a'

16.0±0.3

7.5

±

0.1 1.75

±

0.1

Tape feeding direction

2.0±0.1

12.0±0.2

a

B

A

a'

4.0±0.1

1.5 dia.

+0.1

–0

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Packaging

86

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Dimensions of Plastic Tape

PVG3K

(in mm)

4.0±0.1

2.8±0.1

4.0±0.1

2.0±0.1 0.3±0.1

8.0±0.1

1.5 dia.

+0.1

-0

12.0±0.2

6.2±0.1

5.5±0.1

1.75±0.10

Tape feeding direction

Across a-a'

a

a'

PVS1

a2.0±0.05

a'

Tape feeding direction

4.0

16.0

11.4

11.5

24.0

16.3

1.75

(in mm)

(Tolerance: ±0.1)

Across a-a'

0.4±0.05

3.5

1.5 -0 Dia.

+0.1

■ Dimensions of Radial Taping

PVC6M

0±2

6.35±0.70 12.7±0.3

#2

#3 #1

2.5 2.5

4.0±0.1 Dia.

#1 #2 #3

5.2

6.9

A A'

B B'

12.7±1.0

0.7±0.2

Across A-A'

Across B-B'

6.0min.

9.0±0.5

18.0±0.5

3-0.5 Dia.

6.9

0.55W×3.2L×1.3D

3.2 Dia.

in mm

(

Tolerance : ±0.3

)

2.5±0.5 2.5±0.5

18.5- 0.5

+1.0

PVC6Q

8.0

3.25

A A'

B'B

2.5±0.52.5±0.5

0±2

6.35±0.70

12.7±0.3 4.0±0.1 Dia.

#1 #2 #3

18.5- 0.5

+1.0

12.7±1.0

0.7±0.2

Across A-A'

Across B-B'

6.0min.

9.0±0.5

18.0±0.5

3-0.5 Dia.

6.9

0.55W×3.2L×1.3D

3.2 Dia.

in mm

(

Tolerance : ±0.3

)

PV37Y

12.7±1.0 0±2.0

6.4

6.7

2.5±0.5

12.7±0.3

6.35±0.70

3−0.4±0.1 Dia

18.0±0.5

9.0±0.5

2.5±0.5

0.7±0.2

Across A-A'

A A'

in mm

(

Tolerance : ±0.3

)

18.5- 0.5

+1.0

4.0±0.1 Dia.

B B'

#3 #2 #1

6.0min

Across B-B'

2.0

2.52.5

4.0

PV37Z

12.7±1.0 0±2.0

6.4

6.7

2.5±0.5

12.7±0.3

6.35±0.70

3−0.4±0.1 Dia

18.0±0.5

9.0±0.5

2.5±0.5

0.7±0.2

Across A-A'

A A'

in mm

(

Tolerance : ±0.3

)

18.5- 0.5

+1.0

4.0±0.1 Dia.

B B'

#3 #2 #1

6.0min

Across B-B'

2.0

2.52.5

4.0

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Packaging

87

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Dimensions of Radial Taping

PV36W

18.5- 0.5

+1.0

12.7±1.0 0±2.0

9.6

10.0

2.5±0.5

12.7±0.3

6.35±0.70

3−0.5±0.1 Dia

18.0±0.5

9.0±0.5

2.5±0.5

0.7±0.2

Across A-A'

A A'

in mm

(

Tolerance : ±0.3

)

4.0±0.1 Dia.

B B'

#3#2#1

6.0min

Across B-B'

2.5

PV36X

12.7±1.0 0±2.0

9.6

10.0

2.5±0.5

12.7±0.3

6.35±0.70

3−0.5±0.1 Dia

18.0±0.5

9.0±0.5

2.5±0.5

0.7±0.2

Across A-A'

A A'

6.0min

in mm

(

Tolerance : ±0.3

)

18.5- 0.5

+1.0

4.0±0.1 Dia.

#3 #2 #1

B B'

Across B-B'

2.5

■ Dimensions of Ammo Pack

3T

1T

330 max.

46 max.

305 max.

(in mm)

■ Dimensions of Magazine Packaging

9.8±0.5

15.3±0.5

9.0±0.5

18.8±0.5

370

+0

–1.0

(in mm)

PV01 PVC6

7.3±0.5

21.1±0.5

508

+0

–1.0

11.5±0.5

18.0±0.5

508

+0

–1.0

PV36W/Y/X/Z PV36P

413

+0

–1.0

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Recommended Adjustment Tools/Qualified Standards

88

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Recommended Adjustment Tools

PVZ2

PVZ2A_A04

PVZ3

PVA3

PVS3

PVG3

PVM4

PVG5

PVC6

others

MURATA MFG.

VESSEL MFG.

TORAY INDUSTRIES, INC.

VESSEL MFG.

TORAY INDUSTRIES, INC.

VESSEL MFG.

ENGINEER INC.

VESSEL MFG.

TORAY INDUSTRIES, INC.

VESSEL MFG.

ENGINEER INC.

Manufacturers

Trimmer Potentiometer Series

KMDR090

No.9000+0Z30

No.9000+1.7Z30

SA-2225

No.9000+1.7Z30

SA-2225

No.9000–2.6Z30

No.9000–1.3Z30

DA-54

No.9000+0Z30

SA-2225

No.9000–1.8Z30

DA-40

DA-55

Model Number

KMDR090

KMDR150

KMDR080

KMDR070

KMDR080

KMDR070

KMDR120

KMDR130

KMDR150

KMDR070

KMDR110

KMDR180

MURATA Model Number

– Minus (round edge)

+ Cross

– Minus (round edge)

+ Cross

– Minus (round edge)

– Minus

+ Cross

– Minus (round edge)

– Minus

– Minus (both ends)

– Minus

Blade

Trimmer Potentiometer Series

PVC6

PVZ3

PVA3

PVS3

PVG3 TORAY INDUSTRIES, INC.

VESSEL MFG.

TORAY INDUSTRIES, INC.

Manufacturers

JB-2225

No.CA-10

JB-2225

Model Number

KMBT070

KMBT090

KMBT070

MURATA Model Number

– Minus (round edge)

+ Cross

– Minus (round edge)

Blade

For Automatic Adjustment

■ Qualified Standards

MURATA FACTORY

Sabae Murata Mfg.Co.,Ltd.

Qualified Date

August 14, 1997

Standard

UNDERWRITERS LABORATORIES INC.

Qualified Number

A5704

Wuxi Murata Electronis Co.,Ltd. May 12, 1999 UNDERWRITERS LABORATORIES INC. A7924

The products listed here have been produced by the QS9000 and ISO9001 certified factory.

∗ No ODCs (Ozone Depleting Chemicals) are used on all Murata's trimmer potentiometers.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Head Office

2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division

3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan

Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp

http://www.murata.com/

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Note:

1. Export Control

<

For customers outside Japan

>

Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive

weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.

<

For customers in Japan

>

For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required

for export.

2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially

high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use

in applications other than those specified in this catalog.

qAircraft equipment wAerospace equipment

eUndersea equipment rPower plant equipment

tMedical equipment yTransportation equipment (vehicles, trains, ships, etc.)

uTraffic signal equipment iDisaster prevention / crime prevention equipment

oData-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above

3. Product specifications in this catalog are as of April 2004. They are subject to change or our products in it may be discontinued without advance notice. Please

check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product

engineers.

4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or

transact the approval sheet for product specifications before ordering.

6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect

of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or

contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned

above under licenses without our consent.

7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.