Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 SIP Resistor Network R-NETWORK Murata Manufacturing Co., Ltd. Cat.No.N16E-9 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 CONTENTS 1 Part Numbering 2 SIP Resistor Network Features / Applications 3 1 Standard Resistor Network RGLD Series 4 2 Shrink Pitch Resistor Network RGLE Series 6 3 High-Power Isolated Resistor Network RGSD Series 8 4 R/2R Ladder Resistor Network RGSD Series 10 5 Custom Resistor Network Series 12 2 3 4 Performance and Test Method 14 Packaging 15 Minimum Quantitiy 15 !Caution / Notice 16 ISO9000 Certifications 17 5 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. o Part Numbering N16E9.pdf 01.11.26 structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein. ( The ) If you have any questions about details, inquire at your usual Murata sales office or distributor. R Network (Global Part Number) X, Y, L Circuit RG LD w q Z, M Circuit RG LD w q Custom Circuit RG LD w q 8 X e r 8 J T2 t y o J 104 J u i T2 M 103 e r 8 103 t y A o 1234 e r !0 qProduct ID yResistance Tolerance Z, M Circuit : RA L Circuit : Impedance Tolerance ( Product ID RG Code R Networks wStructure Code Structure LD Terminal Pitch : 2.54mm, Height : 5.0mm max. LE Terminal Pitch : 1.78mm, Height : 5.0mm max. SD Terminal Pitch : 2.54mm, Height : 6.5mm max. HD Terminal Pitch : 2.54mm, Height : 9.0mm max. Resistance Tolerance J 5% G 2%(22 min.) uNominal Resistance (Z, M Circuit : RB) Expressed by three figures. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) Code eNumber of Element Code Number of Element 8 1 or 2 digits shows the number of element. Nominal Resistance 150 15 104 100k If RA and RB values are the same, u and i remain blanks, and the corresponding code is omitted. rCircuit iResistance Tolerance (Z, M Circuit : RB) Code Circuit X Pull-up, Pull-down Circuit Code Y Isolated Circuit J 5% Z Double Terminator Circuit G 2%(22 min.) M Divider Circuit L R/2R Ladder Circuit A Custom Circuit tNominal Resistance Z, M Circuit : RA L Circuit : Output Impedance ( Expressed by three figures. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) 2 Code Nominal Resistance 150 15 103 10k Resistance Tolerance oPackaging ) ) Code Packaging T1 All-Pin Taping T2 3pins Taping !0Design No. Code Design No. 1234 Expressed by four figures Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 SIP Resistor Network Features/Applications These high quality SIP resistor networks are designed using Murata's years of experience in thick film resistor technology. Their reliability is assured by a massproduction system that puts quality first. !Features 1. Various Types Murata's R-networks are designed to meet a wide variaty of resistor needs. Three types are available : standard low profile (approximately the same height as ICs, 5mm max.), middle profile, and high profile. Series Name Pin Pitch 2.54mm 1.78mm Remarks 9.0mm max. RGHD - Custom Series 6.5mm max. RGSD - Custom Series 5.0mm max. RGLD RGLE Standard Series Height 3. Compact Design Compact design allows these resistors to be used in applications requiring high density insertion. An added feature of the 2.54mm pitch types enables insertion along rows and lines of holes with the same pitch. 4. Automatic Insertion To meet demands to decrease assembly and labor costs, Murata offers two taping types. This allows the products to be automatically inserted in the same way as general radial taping parts. Please note that some automatic insertion machines are not supported. 2. Standard Circuits Murata offers the circuits shown below in the standard series; they are frequently used in digital circuits and equipment. Also, Murata produces various custom products to fully meet the customer's needs. Standard Circuits Type Code X Type Y Type M Type Z Type R2 R1 Circuit L Type (RGSD) R2 R R R R1 2R 2R 2R 2R 2R !Applications " Home Electronics Color TVs, VCRs, audio equipment, home appliances containing microcomputers (air-conditioners, fan-heaters, washing machines, refrigerators, microwave ovens, etc.). " Industrial Equipment Computer and peripheral devices, office supplies (printers, word-processors, plain paper copiers, electric typewriters, etc.) Communication equipment (telephones, digital exchanges, communication systems, etc.) Programmable controllers, Measuring equipment, Car electronics and other types of equipment. 3 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 SIP Resistor Network 1 Standard Resistor Network RGLD Series !Features 1. The popular RGLD series has standard low profile dimensions equivalent to those of an IC (height : 5.0mm max. ; pitch : 2.54mm). 2. Available in tape packaging to meet assembly cost reduction demands. 3. Products of this series are used in standard digital circuits. !Standard Circuits Isolated Double Terminator Divider X Type Y Type Z Type M Type R2 R1 R2 Rn Rn R3 R1 n R2 Circuit 1 1 2 3 4 2 3 2n-1 2n 1 2 3 n n 2 +1 2 +2 1 2 3 4 Rn 5 n n+1 n+1 R 1 = R 2= . . . . . . = R n Number of Elements (Pins) 4 n R2 R2 n R 2 +2 R1 Rn n R 2 +1 R2 R1 n R 2 +2 Pull up, Pull down Type Code n R 2 +1 Circuit Type n RA = R1 = R2 = . . . . . . = R 2 n n . . . RB = R 2 +1= R 2 +2 = = Rn R1 = R2= . . . . . . = Rn n=3 to 12 (4 to 13) n=3 to 7 (6 to 14) n=8 to 18 (even number) (6 to 11) n RA = R1 = R2 = . . . . . . = R 2 n n . . . RB = R 2 +1= R 2 +2 = = Rn n=6 to 12 (even number) (7 to 13) * Products with other circuits and other element numbers are also available as custom parts. !Rating Power Rating Each Resistor *1 RGLD n X Type RGLD n Y Type RGLD n M Type RGLD n Z Type 1/8W 1/8W 1/8W 1/8W 1/8WZNumber of elements (n) 1/8WZNumber of elements (n) 1/8WZNumber of elements (n) 1/8WZNumber of elements (n) Z0.6 Total Rated Power Rated voltage (V) = Power rating (W) ZNominal resistance value () Rated Voltage *2 Standard Resistance E-12 series*3 Resistance Range 10() to 1M J : T5%, G : T2% (22min.) Resistance Tolerance*5 T200ppm/C Temp.Coeff.of Resistance Max. Operating Voltage 100V Operating Temperature Y55 to W125C Ratio of Rated Power (%) *1 Derating Curve The rated power per element and the total rated power are derated according to the following curve. 4 The following values*4 100 50 0 -55 20 70 100 Ambient Temperature (D) 125 *2 When rated voltage exceeds the max. operating voltage, the max. operating voltage shall be regarded as the rated voltage. *3 E-12 Standard Values 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82 *4 Standard Resistance Value for Z type () RA/RB=180/390, 220/330, 330/390, 330/470 *5 Resistance tolerance : T1%, T.C.R : T100ppm/C is also available. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 !Dimensions 1 2.5 max. 3.50.5 5.0 max. L max. 1.2 2.540.2 0.25 0.5 Number of Pins 4 5 6 7 8 9 10 11 12 13 14 L 10.1 12.6 15.1 17.6 20.2 22.7 25.3 27.8 30.5 33.0 35.5 (in mm) !Marking (1) (Ex.) (2)(3) (4) (5) (6) (7) 8X 103 J M 21 (1) Pin 1 identification (2) Number of Resistors (3) Type (Circuit) Designation (4) Nominal Resistance Value (3 digits) (5) Resistance Tolerance (6) Manufacturer's Code (7) Date Code (Year, Month) 5 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 SIP Resistor Network Shrink Pitch Resistor Network RGLE Series !Features 1. The RGLE series comprises standard low profile R-networks with dimensions equivalent to those of a shrink pin pitch IC (height : 5.0mm; pitch : 1.78mm). 2. Equivalent dimensions to shrink pin pitch IC facilitates PCB pattern design and enables high density insertion. !Standard Circuits Circuit Type Pull up, Pull down Isolated Divider Type Code X Type Y Type M Type R1 Rn Rn R3 Circuit 1 1 Number of Elements (Pins) 2 3 4 2 3 4 2n-1 2n 1 n R2 R2 n R 2 +1 R2 2 n R 2 +2 R2 R1 R1 3 4 Rn 5 n n+1 n+1 R1 = R2= . . . . . . = Rn R1 = R2= . . . . . . = Rn n=3 to 15 (4 to 16) n=3 to 8 (6 to 16) n RA = R1 = R2 = . . . . . . = R 2 n n . . . RB = R 2 +1= R 2 +2 = = Rn n=6 to 12 (even number) (7 to 13) * Products with other circuits and other element numbers are also available as custom parts. !Rating RGLE n X Type Power Rating Each Resistor *1 1/10W RGLE n M Type 1/10W 1/10W Rated voltage (V) = Power rating (W) ZNominal resistance value () Rated Voltage *2 E-12 series *3 Standard Resistance 10 to 1M Resistance Range J : T5%, G : T2% (22min.) Resistance Tolerance *4 T200ppm/C Temp. Coeff. of Resistance Max. Operating Voltage 100V Operating Temperature Y55 to W125C *1 Derating Curve The rated power per element and the total rated power are derated according to the following curve. 6 RGLE n Y Type 1/10WZNumber of elements (n) Total Rated Power Ratio of Rated Power (%) 2 100 50 0 -55 20 70 100 Ambient Temperature (D) 125 *2 When rated voltage exceeds the max. operating voltage, the max. operating voltage shall be regarded as the rated voltage. *3 E-12 Standard Values 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82 *4 Resistance tolerance : T1%, T.C.R : T100ppm/C is also available. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 !Dimensions 2.5 max. 3.50.5 5.0 max. L max. 1.0 1.780.2 0.25 2 0.4 Number of Pins 4 5 6 7 8 9 10 11 12 13 14 15 16 L 7.7 9.5 11.2 12.9 14.6 16.4 18.2 20.0 21.8 23.5 25.3 27.1 28.9 (in mm) !Marking (1) (Ex.) (2)(3) (4) (5) (6) (7) 8X 103 J M 21 (1) Pin 1 identification (2) Number of Resistors (3) Type (Circuit) Designation (4) Nominal Resistance Value (3 digits) (5) Resistance Tolerance (6) Manufacturer's Code (7) Date Code (Year, Month) 7 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 SIP Resistor Network High-Power Isolated Resistor Network RGSD Series !Features 3 1. Y type is isolated circuit type. And Y type is used as current limiting resistor, level translating resistor. 2. The RGSD series (height : 6.5mm max.; pitch : 2.54mm) is high-power resistor network. 3. Available in the tape packing to meet assembly cost reduction demands. 4. An added feature of the 2.54mm pitch types enables insertion along rows and lines of holes with the same pitch. !Standard Circuits Circuit Type Isolated Isolated Isolated Type Code RGSD3Y Type RGSD4Y Type RGSD5Y Type R1 R2 R3 R1 R2 R3 R4 R1 R2 R3 R4 R5 Circuit 1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 4 5 Circuit Type Isolated Isolated Type Code RGSD6Y Type RGSD7Y Type R1 R2 R3 R4 R5 R6 R1 R2 R3 R4 6 7 R5 8 9 R6 10 R7 Circuit 1 2 3 4 5 6 7 8 9 10 11 12 * Products with other circuits and other element numbers are also available as custom parts. 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 !Rating RGSD3Y RGSD4Y RGSD5Y RGSD6Y 1/4W Power Rating Each Resistor *1 1/4WZNumber of elements (n) Total Rated Power Rated voltage (V) = Power rating (W) ZNominal resistance value () Rated Voltage *2 E-12 series *3 Standard Resistance 10 to 1M Resistance Range J : T5%, G : T2% (22min.) Resistance Tolerance *4 T200ppm/C Temp. Coeff. of Resistance Max. Operating Voltage 100V Operating Temperature Y55 to W125C *2 When rated voltage exceeds the max. operating voltage, the max. operating voltage shall be regarded as the rated voltage. *3 E-12 Standard Values 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82 *4 Resistance tolerance : T1%, T.C.R : T100ppm/C is also available. *1 Derating Curve The rated power per element and the total rated power are derated according to the following curve. Ratio of Rated Power (%) RGSD7Y 100 3 50 0 -55 20 70 100 Ambient Temperature (D) 125 !Dimensions 2.5 max. 3.50.5 6.5 max. L max. 1.2 2.540.2 0.25 0.5 Number of Pins 6 8 10 12 14 L 15.1 20.2 25.3 30.5 35.5 (in mm) !Marking (1) (Ex.) (2)(3) (4) (5) (6) (7) 4Y 103 J M 21 (1) Pin 1 identification (2) Number of Resistors (3) Type (Circuit) Designation (4) Nominal Resistance Value (3 digits) (5) Resistance Tolerance (6) Manufacturer's Code (7) Date Code (Year, Month) 9 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 SIP Resistor Network R/2R Ladder Resistor Network RGSD Series !Features 1. These high performance R/2R ladder R-networks enabled by thick film technology have a maximum of 8 bits. 2. The linearity of RGSD series R/2R ladder R-networks is guaranteed. They have the performance of T1/2LSB. 3. This series has a compact design (height : 6.5mm) and is used in AD/DA converters in a variety of digital circuits and equipment. 4 !Standard Circuits Circuit Type 4Bit R/R2 Ladder Circuit 5Bit R/R2 Ladder Circuit 6Bit R/R2 Ladder Circuit Type Code RGSD8L Type RGSD10L Type RGSD12L Type 2R R R R 2R 2R 2R R R R R 2R 2R 2R 2R 2R 2R 5 6 B1 OUT (MSB) 1 2 GND B5 (LSB) 2R 2R R R R R R 2R 2R 2R 2R 2R 2R Circuit 1 2 GND B4 (LSB) 3 B3 4 B2 3 B4 4 B3 5 B2 7 6 B1 OUT (MSB) 1 2 GND B6 (LSB) 3 B5 4 B4 Circuit Type 7Bit R/R2 Ladder Circuit 8Bit R/R2 Ladder Circuit Type Code RGSD14L Type RGSD16L Type 2R R R R R R R 2R 2R 2R 2R 2R 2R 2R 2R 5 B3 6 B2 R R R R R R R 2R 2R 2R 2R 2R 2R 2R 8 7 B1 OUT (MSB) 2R Circuit 1 GND 10 2 B7 (LSB) 3 B6 4 B5 5 B4 6 B3 7 B2 9 8 B1 OUT (MSB) 1 GND 2 B8 (LSB) 3 B7 4 B6 5 B5 6 B4 7 B3 8 B2 9 10 B1 OUT (MSB) Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 !Rating RGSD8L RGSD10L RGSD14L RGSD16L 1/32W Power Rating Each Resistor * 1/32WZNumber of elements Total Rated Power Rated voltage (V) = Power rating (W) ZNominal resistance value () Rated Voltage 10, 20, 25, 50 Series (R) Standard Resistance 100 to 100k (R) Resistance Range G : T2% Output Impedance Tolerance T1/2 LSB Bit Error Linearity RGSD12L T3.12% Full Scale Accuracy T1.56% T0.78% T0.39% T0.20% T200ppm/C Temperature Output Impedance Coefficient Bit Voltage T50ppm/C Y55 to W125C Operating Temperature Ratio of Rated Power (%) * Derating Curve The rated power per element and the total rated power are derated according to the following curve. 100 50 0 4 -55 20 70 100 Ambient Temperature (D) 125 !Dimensions !Measuring Circuit 2.5 max. 3.50.5 6.5 max. L max. 1.2 2.540.2 Output Impedance 0.25 0.5 Number of Pins 6 7 8 9 10 L 15.1 17.6 20.2 22.7 25.3 R (in mm) Linearity (Bit Error, FSA) V 10.24V (Standard Voltage) !Marking (1) (Ex.) (2) (3) (4) (5) (6) (7) 16L 103 G M 21 (1) Pin 1 identification (2) Number of Resistors (3) Type (Circuit) Designation (4) Nominal Resistance Value (3 digits) (5) Impedance Tolerance (6) Manufacturer's Code (7) Date Code (Year, Month) 11 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 SIP Resistor Network Custom Resistor Network Series !Features 1. The profiles of custom resistor network series products range from high profile (9.0mm) to low profile (5.0mm). All R-network needs can be accommodated. 2. High accuracy performance on resistance tolerance, temperature coefficient etc, is available with high technology and high grade materials. 3. Also, on the relative precision of the performance between resistor elements, the high accuracy is available. !Standard Series 2.540.2 RGLE Series 3.50.5 5.0 max. 6.5 max. 3.50.5 3.50.5 Dimensions 5 RGLD Series 5.0 max. RGSD Series 2.540.2 3.50.5 RGHD Series 9.0 max. Series Name 2.540.2 1.780.2 (in mm) Standard No. of pins 4 to 14 4 to 14 4 to 14 4 to 16 !Example Custom Circuits 1 12 2 3 4 n 1 2 3 4 n 1 2 3 4 5 n 1 2 3 4 5 6 7 8 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 !Rating RGHD Series RGLD Series RGLE Series to 1/2W to 1/4W to 1/8W 1/5Z(Number of pins-1)W 1/8Z(Number of pins-1)W 1/16Z(Number of pins-1)W Power Rating Each Resistor *1 Total Rated Power *1 RGSD Series Rated voltage (V) = Power rating (W) ZNominal resistance value () Rated Voltage *2 10 to 10M Resistance Range D : T0.5%,(100 to 100k), F : T1%,(47 to 220k), T2% (22 Over), J : T5% Resistance Tolerance T0.5%, T1%, T2% (Per customer's specifications) Resistance Value Ratio T200ppm/C (T100ppm/C is also available) Temp.Coeff.of Resistance Max. Operating Voltage to 500V Operating Temperature Y55 to W125C *2 When rated voltage exceeds the max. operating voltage, the max. operating voltage shall be regarded as the rated voltage. Ratio of Rated Power (%) *1 Derating Curve The rated power per element and the total rated power are derated according to the following curve. 100 50 0 -55 20 70 100 Ambient Temperature (D) 125 !Dimensions 2.5 max. H max. L max. R Series Dimension H RGHD RGSD RGLD RGLE 9.0 6.5 5.0 5.0 Dimension Number of Pins P W1 W2 RGLE 1.78 1.0 0.4 Others 2.54 1.2 0.5 Series 3.5T0.5 R 4 5 6 7 8 9 10 11 12 13 14 15 16 RGLE 7.7 9.5 11.2 12.9 14.6 16.4 18.2 20.0 21.8 23.5 25.3 27.1 28.9 Others 10.1 12.6 15.1 17.6 20.2 22.7 25.3 27.8 30.5 33.0 35.5 - - Series L W2 W1 P0.2 5 0.25 (in mm) !Marking (1) (Ex.) (2)(3) (4) 8 A 3000 (5) (6) M 21 (1) Pin 1 identification (2) Number of Resistors (3) Type (Circuit) Designation (4) Murata's design No. (5) Manufacturer's Code (6) Date Code (Year, Month) 13 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 Performance and Test Method Test Item Performance Test Method Based on JIS C 5202 5.1. Maximum applied voltage is shown in the table below. DC Resistance value Within the specified Value Nominal Resistance Range() 1100VRF100 1100VRF1k 111kVRF10k 110kVRF100k 100kVRF1M 100kVRU1M Max. Applied Voltage (V) 00.3 01 03 10 25 50 Based on JIS C 5202 5.2. Measure after maintaining for over 30 minutes at each stage shown in the table below, Calculation shall be made with the formula shown below. Stage Temperature Coefficient of Resistance 1 2 3 4 Within T200ppm/D R R0 t t0 No noticeable abnormalities in appearance. R : Within T1.0% Terminal Strength There shall be no broken or loose pins. Pull Test Bend Test Standard temp. on high-temp. side : Actual measured resistance value() at t D : Actual measured resistance value() at t0 D : Actual measured value of test temperature (D) : Actual measured value of standard temperature (D) TCR(ppm/D)= Short Time Overload Remarks Standard temp. on low-temp. side Temp.C Y20T5 1 Y55T3 Y20T5 1 125T3 RYR0 R0 Z 1 tYt0 Z106 Apply 2.5 times the rated voltage for 5 seconds to each resistor in the network, one at a time. Maintain at room temperature for 30 minutes after remove the voltage, then measure. Fix the sample body and apply a load of 10N gradually to the pin in the axial direction. Maintain the force for 10 seconds. Bend the pin by 90 in the vertical direction and return to the previous position under applying a load of 5N. And repeat a similar operation in the opposite direction. Resistance to Soldering Heat There shall be neither mechanical damage nor noticeable change in appearance. R : Within T0.5% Immerse the pin in melted solder at 260T5D up to the level of the seating plane of pin for 10T1 second and raise. Then maintain at room temperature for over 1 hour and measure. Solderability Over 95% of the immersed part of the pins is covered with new solder. Immerse the pin in a flux comprising methanol and resin (weight ratio 25%) up to the level of the seating plane of pin for 5Y10seconds. Then, immerse in melted solder at 235T5D for 2T0.5 second and raise slowly. Based on JIS C 5202 7.4 After repeating the 5 cycles shown in the table below, maintain at room temperature for 1Y2 hours, then measure. Temperature Cycling There shall be no mechanical damage. R : Within T0.5% Humidity There shall be no noticeable abnormalities in appearance. R : Within T2.0% Maintain without load at a constant temperature 40T2D and constant humidity of 90Y95% for 1000T48 0 hours. Remove and maintain at room temperature for over 1 hour, then measure. Humidity Load There shall be no noticeable abnormalities in appearance. R : Within T2.0% Apply the rated voltage intermittently, 1.5 hours on and 0.5 hours off in a chamber at a constant temperature of 40T2D and constant humidity of 90Y95% for 1000T 48 0 hours. Remove and maintain at room temperature for over 1 hour, then measure. Load Life There shall be no noticeable abnormalities in appearance. R : Within T2.0% Apply the rated voltage intermittently, 1.5 hours on and 0.5 hours off in a high-temperature chamber at 70T3D for 1000T48 0 hours. Remove and maintain at room temperature for over 1 hour, then measure. 14 Stage Temp.(D) Time (min.) 1 Y55T3 30 2 Room Temp. 2 to 3 3 125T2 30 4 Room Temp. 2 to 3 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 Packaging 1. R-networks are available in two types of taping : 3-pin taping and all-pin taping. 2. 3-pin taping type is applicable to automatic insertion equivalent to 5mm pitch radial taping parts. The tips of untaped terminals are shaped by a V-cut for high accuracy insertion. !Taping Dimensions Taping Type Code Taping Dimensions (in mm) 5 - 8 PINS 8 pins 7 pins 25.41.0 10 pins 9 pins T1 4.00.3 2.540.5 38.11.0 02.0 16.00.5 9.00.5 1.01.0 6.0 18.00.5 6 pins 5 pins 9 - 10 PINS 5.0 max. Series 2.540.5 5.080.5 5.080.5 12.70.3 12.70.3 RGLD T2 4.00.3 02.0 1.01.0 9 pins 8 pins 6.0 9.00.5 18.00.5 7 pins 6 pins 25.41.0 16.00.5 5.0 max. 5 pins 4 pins 3.00.3 4 - 9 PINS 6.350.5 12.70.3 12.70.3 !Standard Ammo Pack Package Quantity 1000pcs./case !Package and Marking * H, L (Height and Length) Type T1 T2 Number of pins H 5 to 8 200 9 to 10 290 4 to 9 210 L 40 45 330 m ax. Lm ax . H max. (in mm) !Minimum Quantity 1000pcs. 15 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 !Caution/Notice !!Caution Use within rated voltage To avoid resistor burning or breakdown, do not use beyond the rated voltage calculated by taking the square root of the product or rated power and nominal resistance value. !Notice 1. Handling after mounting to PCB Do not bend the product after mounting and soldering the product. If subjected to mechanical stress, the resistor may become damaged. 2. Confirmation of resistor operation in application Ensure proper performance of the product in your application. 3. Environmental conditions Do not use or store the product in locations containing corrosive gasses (Cl2, H2S, NH3, SO2, NOX, etc.) or having such high humidity as will dew as the product's resin coating does not form a perfect seal. 16 3 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 ISO 9000 Certifications Manufacturing plants of these products in this catalog have obtained the ISO9002 quality system certificate. Plant Certified Date Organization Registration No. Kanazu Murata Manufacturing Co., Ltd. July. 1. 1998 UL* A6734 * UL : Underwriters Laboratories Inc. 17 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one of our products for other applications than specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of November 2001. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. 5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us. http://www.murata.co.jp/products/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp