Murata
Manufacturing Co., Ltd.
Cat.No.N16E-9
SIP Resistor Network
R-NETWORK
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
1
2
3
4
5
1
2
3
4
5
Part Numbering 2
SIP Resistor Network Features / Applications 3
Standard Resistor Network RGLD Series 4
Shrink Pitch Resistor Network RGLE Series 6
High-Power Isolated Resistor Network RGSD Series 8
R/2R Ladder Resistor Network RGSD Series 10
Custom Resistor Network Series 12
Performance and Test Method 14
Packaging 15
Minimum Quantitiy 15
!Caution / Notice 16
ISO9000 Certifications 17
CONTENTS
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
y
J
o
T2
e
8
r
X
t
103
RG
qw
LD
y
J
u
104
e
8
r
M
t
103
RG
qw
LD
i
J
o
T2
X, Y, L Circuit
Z, M Circuit
Custom Circuit
e
8
r
A
RG
qw
LD
o Part Numbering The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein.
If you have any questions about details, inquire at your usual Murata sales office or distributor.
()
!0
1234
2
qProduct ID yResistance Tolerance
(
Z, M Circuit : RA
L Circuit : Impedance Tolerance
)
uNominal Resistance (Z, M Circuit : RB)
R Network
RG R Networks
J
G
±5%
±2%(22 min.)
Product ID
Code Resistance Tolerance
(Global Part Number)
tNominal Resistance
(
Z, M Circuit : RA
L Circuit : Output Impedance
)
Expressed by three figures. The unit is ohm (). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Expressed by three figures. The unit is ohm (). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
150
103
Ex.)
15
10k
Code Nominal Resistance
iResistance Tolerance (Z, M Circuit : RB)
J
G
±5%
±2%(22 min.)
Code Resistance Tolerance
oPackaging
!0Design No.
T1
T2
All-Pin Taping
3pins Taping
Code Packaging
1234 Expressed by four figures
Code Design No.
wStructure
LD
LE
SD
HD
Code Structure
Terminal Pitch : 2.54mm, Height : 5.0mm max.
Terminal Pitch : 1.78mm, Height : 5.0mm max.
Terminal Pitch : 2.54mm, Height : 6.5mm max.
Terminal Pitch : 2.54mm, Height : 9.0mm max.
eNumber of Element
8
Code Number of Element
1 or 2 digits shows the number of element.
rCircuit
X
Y
Z
M
L
A
Code Circuit
Pull-up, Pull-down Circuit
Isolated Circuit
Double Terminator Circuit
Divider Circuit
R/2R Ladder Circuit
Custom Circuit
150
104
Nominal ResistanceCode
15
100k
If RA and RB values are the same, u and i remain blanks, and
the corresponding code is omitted.
Ex.)
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
3
These high quality SIP resistor networks are designed using
Murata's years of experience in thick film resistor technology.
Their reliability is assured by a massproduction system that
puts quality first.
!Features
1. Various Types
Murata's R-networks are designed to meet a wide variaty
of resistor needs. Three types are available : standard
low profile (approximately the same height as ICs, 5mm
max.), middle profile, and high profile.
!Applications
" Home Electronics
Color TVs, VCRs, audio equipment, home appliances
containing microcomputers (air-conditioners, fan-heaters,
washing machines, refrigerators, microwave ovens, etc.).
" Industrial Equipment
Computer and peripheral devices, office supplies
(printers, word-processors, plain paper copiers, electric
typewriters, etc.) Communication equipment (telephones,
digital exchanges, communication systems, etc.)
Programmable controllers, Measuring equipment, Car
electronics and other types of equipment.
2. Standard Circuits
Murata offers the circuits shown below in the standard
series; they are frequently used in digital circuits and
equipment. Also, Murata produces various custom
products to fully meet the customer's needs.
3. Compact Design
Compact design allows these resistors to be used in
applications requiring high density insertion. An added
feature of the 2.54mm pitch types enables insertion along
rows and lines of holes with the same pitch.
4. Automatic Insertion
To meet demands to decrease assembly and labor costs,
Murata offers two taping types. This allows the products
to be automatically inserted in the same way as general
radial taping parts. Please note that some automatic
insertion machines are not supported.
Pin Pitch
Height
2.54mm Remarks
9.0mm max.
6.5mm max.
5.0mm max.
RGHD
RGSD
RGLD
Custom Series
Custom Series
Standard Series
1.78mm
-
-
RGLE
Series Name
X Type Y Type M Type Z Type L Type (RGSD)
Circuit
Standard Circuits
Type Code
R1
R2
R2
R12R 2R 2R
RR R
2R 2R
SIP Resistor Network Features/Applications
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
4
!Features
1. The popular RGLD series has standard low profile
dimensions equivalent to those of an IC (height : 5.0mm
max. ; pitch : 2.54mm).
2. Available in tape packaging to meet assembly cost
reduction demands.
3. Products of this series are used in standard digital circuits.
!Standard Circuits
Pull up, Pull down
X Type
Isolated
Y Type
Double Terminator
Z Type
Divider
M Type
Circuit Type
Type Code
Circuit
Number of
Elements
(Pins)
n=3 to 12
(4 to 13) n=3 to 7
(6 to 14) n=8 to 18 (even number)
(6 to 11) n=6 to 12 (even number)
(7 to 13)
• Products with other circuits and other element numbers are also available as custom parts.
!Rating
Power Rating Each Resistor
*1
Total Rated Power
Rated Voltage *2
Standard Resistance
Resistance Range
Resistance Tolerance*5
Temp.Coeff.of Resistance
Max. Operating Voltage
Operating Temperature
1/8W
1/8WZNumber of elements (n)
1/8W
1/8WZNumber of elements (n)
E-12 series*3
10() to 1M
J : T5%, G : T2% (22min.)
T200ppm/°C
100V
Y55 to W125°C
1/8W
1/8WZNumber of elements (n)
1/8W
1/8WZNumber of elements (n) Z0.6
The following values*4
*1 Derating Curve
The rated power per element and the total rated power are derated according to
the following curve.
*2 When rated voltage exceeds the max. operating voltage, the max. operating
voltage shall be regarded as the rated voltage.
*3 E-12 Standard Values
10, 12, 15, 18, 22, 27,
33, 39, 47, 56, 68, 82
*4 Standard Resistance Value for Z type ()
RA/RB=180/390, 220/330, 330/390, 330/470
*5 Resistance tolerance : T1%, T.C.R : T100ppm/°C is also available.
Rated voltage (V) = Power rating (W) ZNominal resistance value ()
RGLD n X Type RGLD n Y Type RGLD n Z TypeRGLD n M Type
SIP Resistor Network
Standard Resistor Network RGLD Series
R2R1
R1=R2= . . . . . . =Rn
1 2 3 4 n+1
R3Rn
R1=R2= . . . . . . =Rn
1 2 3 2n-1 2n4
R2R1Rn
RA=R1=R2= . . . . . . =R
1 2 3 +1
n
2
R2R1
Rn
n
2
RB=R +1=R +2= . . . =Rn
n
2n
2
+2
n
2
R +1
n
2
R +2
n
2
Rn
2
1 2
R1
Rn
3 4 5 n n+1
R2
RA=R1=R2= . . . . . . =R n
2
RB=R +1=R +2= . . . =Rn
n
2n
2
R +2
n
2
R +1
n
2
Rn
2
100
50
055 20 70 100 125
Ambient Temperature (D)
Ratio of Rated Power (%)
1
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
5
!Dimensions
Number of Pins
L
4
10.1
5
12.6
6
15.1
7
17.6
8
20.2
9
22.7
10
25.3
11
27.8
12
30.5
13
33.0
14
35.5
(in mm)
(1) Pin 1 identification (5) Resistance Tolerance
(2) Number of Resistors (6) Manufacturer's Code
(3) Type (Circuit) Designation (7) Date Code (Year, Month)
(4) Nominal Resistance Value (3 digits)
!Marking
(Ex.)
1.2 0.5
0.25
2.5 max.
2.54±0.2
3.5±0.5 5.0 max.
L max.
8X
(1)
103 J 21
M
(6) (7)(2)(3) (5)(4)
1
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
6
!Features
1. The RGLE series comprises standard low profile
R-networks with dimensions equivalent to those of a
shrink pin pitch IC (height : 5.0mm; pitch : 1.78mm).
2. Equivalent dimensions to shrink pin pitch IC facilitates
PCB pattern design and enables high density insertion.
!Standard Circuits Pull up, Pull down
X Type
Isolated
Y Type
Divider
M Type
Circuit Type
Type Code
Circuit
Number of
Elements
(Pins)
n=3 to 15
(4 to 16) n=3 to 8
(6 to 16) n=6 to 12 (even number)
(7 to 13)
• Products with other circuits and other element numbers are also available as custom parts.
!Rating
Power Rating Each Resistor *1
Total Rated Power
Rated Voltage *2
Standard Resistance
Resistance Range
Resistance Tolerance *4
Temp. Coeff. of Resistance
Max. Operating Voltage
Operating Temperature
1/10W 1/10W
1/10WZNumber of elements (n)
E-12 series *3
10 to 1M
J : T5%, G : T2% (22min.)
T200ppm/°C
100V
Y55 to W125°C
1/10W
*1 Derating Curve
The rated power per element and the total rated power are derated according to
the following curve.
*2 When rated voltage exceeds the max. operating voltage, the max. operating
voltage shall be regarded as the rated voltage.
*3 E-12 Standard Values
10, 12, 15, 18, 22, 27,
33, 39, 47, 56, 68, 82
*4 Resistance tolerance : T1%, T.C.R : T100ppm/°C is also available.
RGLE n X Type RGLE n Y Type RGLE n M Type
SIP Resistor Network
Shrink Pitch Resistor Network RGLE Series
R2R1
R1=R2= . . . . . . =Rn
1 2 3 4 n+1
R3Rn
R1=R2= . . . . . . =Rn
1 2 3 2n-1 2n4
R2R1Rn
1 2
R1
Rn
3 4 5 n n+1
R2
RA=R1=R2= . . . . . . =R n
2
RB=R +1=R +2= . . . =Rn
n
2n
2
R +2
n
2
R +1
n
2
Rn
2
Rated voltage (V) = Power rating (W) ZNominal resistance value ()
100
50
055 20 70 100 125
Ambient Temperature (D)
Ratio of Rated Power (%)
2
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
7
!Dimensions
!Marking
Number of Pins
L
4
7.7
5
9.5
6
11.2
7
12.9
8
14.6
9
16.4
10
18.2
11
20.0
12
21.8
13
23.5
14
25.3
15
27.1
16
28.9
(in mm)
(1) Pin 1 identification (5) Resistance Tolerance
(2) Number of Resistors (6) Manufacturer's Code
(3) Type (Circuit) Designation (7) Date Code (Year, Month)
(4) Nominal Resistance Value (3 digits)
(Ex.)
1.0 0.4
0.25
2.5 max.
1.78±0.2
3.5±0.5 5.0 max.
L max.
8X
(1)
103 J 21
M
(6) (7)(2)(3) (5)(4)
2
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
8
!Features
1. Y type is isolated circuit type. And Y type is used as
current limiting resistor, level translating resistor.
2. The RGSD series (height : 6.5mm max.; pitch : 2.54mm)
is high-power resistor network.
3. Available in the tape packing to meet assembly cost
reduction demands.
4. An added feature of the 2.54mm pitch types enables
insertion along rows and lines of holes with the same
pitch.
!Standard Circuits Isolated
RGSD3Y Type
Isolated
RGSD6Y Type
Isolated
RGSD7Y Type
Isolated
RGSD4Y Type
Isolated
RGSD5Y Type
Circuit Type
Type Code
Circuit Type
Type Code
Circuit
Circuit
SIP Resistor Network
High-Power Isolated Resistor Network RGSD Series
1 2
R1
3 4
R2
5 6
R3
1 2
R1
3 4
R2
5 6
R3
7 8
R4
1 2
R1
3 4
R2
5 6
R3
7 8
R4
9 10
R5
1 2
R1
3 4
R2
5 6
R3
7 8
R4
9 10
R5
11 12
R6
1 2
R1
3 4
R2
5 6
R3
7 8
R4
9 10
R5
11 12
R6
13 14
R7
3
• Products with other circuits and other element numbers are also available as custom parts.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
9
!Dimensions
Number of Pins
L
6
15.1
8
20.2
10
25.3
12
30.5
14
35.5
(in mm)
(1) Pin 1 identification (5) Resistance Tolerance
(2) Number of Resistors (6) Manufacturer's Code
(3) Type (Circuit) Designation (7) Date Code (Year, Month)
(4) Nominal Resistance Value (3 digits)
!Rating
Power Rating Each Resistor
*1
Total Rated Power
Rated Voltage *2
Standard Resistance
Resistance Range
Resistance Tolerance *4
Temp. Coeff. of Resistance
Max. Operating Voltage
Operating Temperature
1/4W
1/4WZNumber of elements (n)
E-12 series *3
10 to 1M
J : T5%, G : T2% (22min.)
T200ppm/°C
100V
Y55 to W125°C
*1 Derating Curve
The rated power per element and the total rated power are derated according to
the following curve.
*2 When rated voltage exceeds the max. operating voltage, the max. operating
voltage shall be regarded as the rated voltage.
*3 E-12 Standard Values
10, 12, 15, 18, 22, 27,
33, 39, 47, 56, 68, 82
*4 Resistance tolerance : T1%, T.C.R : T100ppm/°C is also available.
RGSD3Y RGSD4Y RGSD5Y RGSD6Y RGSD7Y
!Marking
(Ex.)
100
50
055 20 70 100 125
Ambient Temperature (D)
Ratio of Rated Power (%)
1.2 0.5
0.25
2.5 max.
2.54±0.2
3.5±0.5 6.5 max.
L max.
4Y
(1)
103 J 21
M
(6) (7)(2)(3) (5)(4)
Rated voltage (V) = Power rating (W) ZNominal resistance value ()
3
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
10
!Features
1. These high performance R/2R ladder R-networks enabled
by thick film technology have a maximum of 8 bits.
2. The linearity of RGSD series R/2R ladder R-networks is
guaranteed. They have the performance of T1/2LSB.
3. This series has a compact design (height : 6.5mm) and is
used in AD/DA converters in a variety of digital circuits
and equipment.
!Standard Circuits4Bit R/R2 Ladder Circuit
RGSD8L Type
7Bit R/R2 Ladder Circuit
RGSD14L Type
8Bit R/R2 Ladder Circuit
RGSD16L Type
5Bit R/R2 Ladder Circuit
RGSD10L Type
6Bit R/R2 Ladder Circuit
RGSD12L Type
Circuit Type
Type Code
Circuit Type
Type Code
Circuit
Circuit
SIP Resistor Network
R/2R Ladder Resistor Network RGSD Series
1 2
R
3 4
R
5 6
GND B4B3B2B1
(MSB)(LSB)OUT
R
2R 2R 2R 2R 2R
1 2
R
3 4
R
5 7
GND B5B4B3B2(MSB)(LSB)OUT
R R
2R 2R 2R 2R 2R
6
B1
2R
1 2
R
3 4
R
5 8
GND B6B5B4B3(MSB)(LSB)OUT
R R
2R 2R 2R 2R 2R
6
B2
2R
7
B1
2R
R
1 2
R
3 4
R
5 9
GND B7B6B5B4(MSB)(LSB)OUT
R R R R
2R 2R 2R 2R 2R
6
B3
2R
7
B2
2R
8
B1
2R
1 2
R
3 4
R
5 10
GND B8B7B6B5(MSB)(LSB)OUT
R R R R R
2R 2R 2R 2R 2R
6
B4
2R
7
B3
2R 2R
8
B29
B1
2R
4
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
11
!Dimensions
Number of Pins
L
6
15.1
7
17.6
8
20.2
9
22.7
10
25.3
(in mm)
(1) Pin 1 identification (5) Impedance Tolerance
(2) Number of Resistors (6) Manufacturer's Code
(3) Type (Circuit) Designation (7) Date Code (Year, Month)
(4) Nominal Resistance Value (3 digits)
!Rating
Power Rating Each Resistor *
Total Rated Power
Rated Voltage
(R) Standard Resistance
(R) Resistance Range
Output Impedance Tolerance
Bit Error
Linearity
Temperature
Coefficient
Full Scale Accuracy
Output Impedance
Bit Voltage
Operating Temperature
1/32W
1/32WZNumber of elements
10, 20, 25, 50 Series
100 to 100k
G : T2%
T1/2 LSB
T0.78% T0.39% T0.20%T1.56%T3.12%
T50ppm/°C
Y55 to W125°C
T200ppm/°C
* Derating Curve
The rated power per element and the total rated power are derated according to
the following curve.
Rated voltage (V) = Power rating (W) ZNominal resistance value ()
RGSD8L RGSD10L RGSD12L RGSD14L RGSD16L
!Marking
(Ex.)
!Measuring Circuit
R
V
10.24V
(Standard Voltage)
Output Impedance
Linearity (Bit Error, FSA)
100
50
055 20 70 100 125
Ambient Temperature (D)
Ratio of Rated Power (%)
1.2 0.5
0.25
2.5 max.
2.54±0.2
3.5±0.5 6.5 max.
L max.
16L
(1)
103 G 21
M
(6) (7)(2)(3) (5)(4)
4
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
12
!Features
1. The profiles of custom resistor network series products
range from high profile (9.0mm) to low profile (5.0mm).
All R-network needs can be accommodated.
2. High accuracy performance on resistance tolerance,
temperature coefficient etc, is available with high
technology and high grade materials.
3. Also, on the relative precision of the performance
between resistor elements, the high accuracy is available.
!Standard Series RGHD Series RGSD Series RGLD Series RGLE SeriesSeries Name
Dimensions
(in mm)
Standard
No. of pins 4 to 14 4 to 14 4 to 14 4 to 16
!Example Custom Circuits
SIP Resistor Network
Custom Resistor Network Series
2.54±0.2
3.5±0.5 9.0 max.
2.54±0.2
3.5±0.5 6.5 max.
2.54±0.2
3.5±0.5 5.0 max.
1.78±0.2
3.5±0.5 5.0 max.
1 2 3 4 5 7n 1 2 4
1 n2 3 4 n53 1 83 42 6
5
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
13
!Dimensions
Number of Pins
L RGLE
Others
8
14.6
20.2
7
12.9
17.6
6
11.2
15.1
54
9.5
12.6
7.7
10.1
9
16.4
22.7
10
18.2
25.3
11
20.0
27.8
12
21.8
30.5
13
23.5
33.0
14
25.3
35.5
15
27.1
-
16
28.9
-
(in mm)
(1) Pin 1 identification (4) Murata's design No.
(2) Number of Resistors (5) Manufacturer's Code
(3) Type (Circuit) Designation (6) Date Code (Year, Month)
!Rating
Power Rating Each Resistor
*1
Total Rated Power *1
Rated Voltage *2
Resistance Range
Resistance Tolerance
Resistance Value Ratio
Temp.Coeff.of Resistance
Max. Operating Voltage
Operating Temperature
to 1/4W
1/8Z(Number of pins-1)W
to 1/8W
1/16Z(Number of pins-1)W
to 1/2W
1/5Z(Number of pins-1)W
10 to 10M
D : T0.5%,(100 to 100k), F : T1%,(47 to 220k), T2% (22 Over), J : T5%
T0.5%, T1%, T2% (Per customer's specifications)
T200ppm/°C (T100ppm/°C is also available)
to 500V
Y55 to W125°C
*1 Derating Curve
The rated power per element and the total rated power are derated according to
the following curve.
*2 When rated voltage exceeds the max. operating voltage, the max. operating
voltage shall be regarded as the rated voltage.
RGHD Series RGSD Series RGLD Series RGLE Series
!Marking
(Ex.)
Series
Dimension
RGLE
Others
W2
0.4
0.5
W1P
1.0
1.2
1.78
2.54
Series
Series
H
R
RGLD
5.0
RGLE
5.0
RGSDRGHD
6.5
3.5T0.5
9.0
Dimension
100
50
055 20 70 100 125
Ambient Temperature (D)
Ratio of Rated Power (%)
W1W2
0.25
2.5 max.
P±0.2
RH max.
L max.
8A
(1)
3000 21
M
(5) (6)(2)(3) (4)
Rated voltage (V) = Power rating (W) ZNominal resistance value ()
5
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
Based on JIS C 5202 5.2. Measure after maintaining for over 30 minutes at each stage
shown in the table below, Calculation shall be made with the formula shown below.
R : Actual measured resistance value() at t D
R0: Actual measured resistance value() at t0D
t : Actual measured value of test temperature (D)
t0: Actual measured value of standard temperature (D)
TCR(ppm/D)= Z Z106
1
tYt0
RYR0
R0
1100VRF100
1100VRF1k
111kVRF10k
110kVRF100k
100kVRF1M
100kVRU1M
Based on JIS C 5202 5.1. Maximum applied voltage is shown in the table below.
Test Item Performance Test Method
Terminal
Strength
Pull Test
DC Resistance value Within the specified Value
Nominal Resistance Range()
Max. Applied Voltage (V)
50
00.3
01
03
10
25
Temperature
Coefficient of
Resistance Within T200ppm/D
Stage Temp.°C
1Standard temp. on low-temp. side
Remarks
2
3
4
Y20T
5
1
Y55T3
Y20T
5
1
125T3Standard temp. on high-temp. side
Apply 2.5 times the rated voltage for 5 seconds to each resistor in the network, one at a time.
Maintain at room temperature for 30 minutes after remove the voltage, then measure.
Short Time Overload No noticeable abnormalities in
appearance.
R : Within T1.0%
Bend Test
Fix the sample body and apply a load of 10N gradually to the pin in the axial direction.
Maintain the force for 10 seconds.
Bend the pin by 90°in the vertical direction and return to the previous position under applying
a load of 5N. And repeat a similar operation in the opposite direction.
There shall be no broken or loose
pins.
Immerse the pin in melted solder at 260T5Dup to the level of the seating plane of pin for
10T1 second and raise. Then maintain at room temperature for over 1 hour and measure.
Resistance to
Soldering Heat
There shall be neither mechanical
damage nor noticeable change in
appearance.
R : Within T0.5%
Immerse the pin in a flux comprising methanol and resin (weight ratio 25%) up to the level of
the seating plane of pin for 5Y10seconds. Then, immerse in melted solder at 235T5Dfor
2T0.5 second and raise slowly.
Solderability Over 95% of the immersed part of
the pins is covered with new
solder.
Based on JIS C 5202 7.4 After repeating the 5 cycles shown in the table below, maintain at
room temperature for 1Y2 hours, then measure.
Temperature
Cycling
There shall be no mechanical
damage.
R : Within T0.5% Stage 1 2 3 4
Temp.(D)
Time (min.)
Y55T3
30 Room Temp.
2 to 3 125T2
30 Room Temp.
2 to 3
Maintain without load at a constant temperature 40T2Dand constant humidity of 90Y95% for
1000T
48
0
hours. Remove and maintain at room temperature for over 1 hour, then measure.
Humidity There shall be no noticeable
abnormalities in appearance.
R : Within T2.0%
Apply the rated voltage intermittently, 1.5 hours on and 0.5 hours off in a chamber at a
constant temperature of 40T2Dand constant humidity of 90Y95% for 1000T
48
0
hours.
Remove and maintain at room temperature for over 1 hour, then measure.
Humidity Load There shall be no noticeable
abnormalities in appearance.
R : Within T2.0%
Apply the rated voltage intermittently, 1.5 hours on and 0.5 hours off in a high-temperature
chamber at 70T3Dfor 1000T
48
0
hours. Remove and maintain at room temperature for over 1
hour, then measure.
Load Life There shall be no noticeable
abnormalities in appearance.
R : Within T2.0%
14
Performance and Test Method
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
(in mm)
!Minimum Quantity
1000pcs.
15
!Taping Dimensions
1. R-networks are available in two types of taping : 3-pin
taping and all-pin taping.
2. 3-pin taping type is applicable to automatic insertion
equivalent to 5mm pitch radial taping parts. The tips of
untaped terminals are shaped by a V-cut for high
accuracy insertion.
!Standard Ammo Pack Package Quantity
1000pcs./case
!Package and Marking
• H, L (Height and Length)
Taping Dimensions (in mm)Series Taping
Type Code
RGLD
T1
T2
Type Number of pins L
T1
T2
5 to 8
9 to 10
4 to 9
40
45
H
200
290
210
Packaging
1.0±1.0
6.0
16.0±0.5
25.4±1.0
2.54±0.52.54±0.5
12.7±0.3 12.7±0.3
6 pins
5 pins 8 pins
5 8 PINS 9 10 PINS
7 pins
18.0±0.5
φ4.0±0.3
5.08±0.5 5.08±0.5
0±2.0
10 pins
9 pins
5.0 max.
38.1±1.0
9.0±0.5
1.0±1.0
5.0 max.
6.0
3.0±0.3
6.35±0.5
12.7±0.3 12.7±0.3
5 pins
4 pins
4 9 PINS
18.0±0.5
9.0±0.5
φ4.0±0.3
0±2.0
7 pins
6 pins 8 pins
25.4±1.0
9 pins
16.0±0.5
330 max.
L max.
H max.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
16
3
!!Caution
Use within rated voltage
To avoid resistor burning or breakdown, do not use
beyond the rated voltage calculated by taking the square
root of the product or rated power and nominal resistance
value.
!Notice
1. Handling after mounting to PCB
Do not bend the product after mounting and soldering the
product. If subjected to mechanical stress, the resistor
may become damaged.
2. Confirmation of resistor operation in application
Ensure proper performance of the product in your
application.
3. Environmental conditions
Do not use or store the product in locations containing
corrosive gasses (Cl2, H2S, NH3, SO2, NOX, etc.) or
having such high humidity as will dew as the product's
resin coating does not form a perfect seal.
!Caution/Notice
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
17
Manufacturing plants of these products in this catalog have obtained the ISO9002 quality system certificate.
Certified Date
July. 1. 1998
Organization
UL*
Registration No.
A6734
Plant
Kanazu Murata
Manufacturing Co., Ltd.
ISO 9000 Certifications
* UL : Underwriters Laboratories Inc.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
Head Office
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111 International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp
http://www.murata.co.jp/products/
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering. N16E9.pdf 01.11.26
Note:
1. Export Control
<
For customers outside Japan
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
<
For customers in Japan
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require
especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one
of our products for other applications than specified in this catalog.
qAircraft equipment
wAerospace equipment
eUndersea equipment
rPower plant equipment
tMedical equipment
yTransportation equipment (vehicles, trains, ships, etc.)
uTraffic signal equipment
iDisaster prevention / crime prevention equipment
oData-processing equipment
!0 Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of November 2001. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product
specification or to transact the approval sheet for product specification, before your ordering.
5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us.