Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
1
ORIENT
Photocoupler
Product Data Sheet
Name: MOC306X
Customer:_________________
Date:__________________
Add：Block A 3rd Floor No.4 Building Tian An Cyber Park Huang Ge Rd, Long Gang Dist, Shenzhen, Guangdong, 518172
Web: www.orient-opto.com
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
2
1. Features
(1) High isolation voltage between input and output (Viso:5000 V rms )
(2) 6pin zero-cross optoisolators triac driver output
(3) High repetitive peak off-state voltage VDRM : Min. 600V
(4) Compliance with EU REACH
(5) High critical rate of rise of off-state voltage( dV/dt : MIN. 1000V /s )
(6) Dual-in-line package : MOC3061 / MOC3062 / MOC3063
(7) Wide lead spacing package : MOC3061M / MOC3062M / MOC3063M
(8) Surface mounting package : MOC3061S / MOC3062S / MOC3063S
(9) Tape and reel packaging : MOC3061S-TA1 / MOC3062S-TA1 / MOC3063S-TA1
(10) Operating temperature -40 ℃to +110 ℃
2. Description
The MOC306X series of devices each consist of a GaAs infrared emitting diode optically
coupled to a monolithic silicon zero voltage crossing photo triac.They are designed for use with
a discrete power triac in the interface of logic systems , such as solid-state relays, industrial
controls, motors, solenoids and consumer appliances.
3.Application Range
•AC Motor Drives •AC Motor Starters •Static power switch
•Lighting Controls •Solenoid/Valve Controls •Solid State Relays
•Temperature Controls
4. Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rateing
Unit
Input
Forward Current）
IF
50
mA
Junction Temperature
TJ
125
℃
Reverse Voltage
VR
6
V
Power Dissipation
P
100
mW
Output
Off-State Output Terminal Voltage
VDRM
600
V
Peak Repetitive Surge Current
(PW=1ms，120 pps)
ITSM
1
A
Junction Temperature
TJ
125
℃
Collector Power Dissipation
PC
150
mW
Total Power Dissipation
Ptot
250
mW
*Insulation Voltage
Viso
5000
Vrms
Working Temperature
Topr
-40 ~ + 110
℃
Deposit Temperature
Tstg
-55 ~ + 150
*2 Soldering Temperature
Tsol
260
Notes:
*1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2&3 are shorted together, and pins 4, 6 are
shorted together.
* 2 For 10 seconds
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
3
5.Electrical Optical Characteristics at Ta=25°C
*1.Test voltage must be applied within dv/dt rating.
*2. This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only.
*3. All devices are guaranteed to trigger at an IFvalue less than or equal to max IFT .
Therefore,recommended operating IFlies between max IFT , 15 mA for 3061, 10 mA for 3062, 5
mA for 3063, and absolute max IF(50mA).
Parameter
Test Condition
Min
Typ.
Max
Unit
Input
Forward Voltage
IF=20mA
---
1.2
1.6
V
Reverse Current
VR=6V
---
0.05
10
μA
Output
1.Peak Blocking Current, Either
Direction
VDRM = 600V
---
---
500
nA
Peak On-State Voltage, Either
Direction
ITM=100mA Peak
---
---
3.0
V
2.Critical rate of Rise of Off-State
Voltage
Vin=240Vrms
1000
---
---
V/us
Couple
3.Led Trigger
Current,Current Required to
Latch Output, Either
Direction
MOC3061
Main Terminal Voltage =
3V
---
---
15
mA
MOC3062
---
---
10
MOC3063
---
---
5
Holding Current, Either Direction
---
400
---
uA
ZERO
CROSSING
Inhibit Voltage
IF=Rated IFT , MT1-MT2
Voltage above which
device will not trigger.
---
5
20
Volts
Leakage in Inhibited State
IF= Rated IFT ,
Rated
VDRM , Off State
---
---
500
μA
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
4
6.Naming Rule
NOTE：
(1) Manufacturer denotes Shenzhen Orient Tech Ltd . Co ., Ltd.
(2) denotes IFT Rank Code ,1=MOC3061；2=MOC3062；3=MOC3063.
(3) denotes Week code.
(4) denotes Year code.
(5) denotes Anode.
(6) MOC306 denotes Device Part Number.
(7) Unit:mm
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
5
7. Package Dimension
(1).MOC306X
(2).MOC306X M
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
6
(3).MOC306X S
8. Taping Dimensions
(1).MOC306XS-TA
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
7
(2).MOC306XS-TA1
Description
Symbol
Dimension in mm (inch)
Tape wide
W
16±0.3 (0.63)
Pitch of sprocket holes
P0
4±0.1 (0.15)
Distance of compartment
F
7.5±0.1 (0.295)
P2
2±0.1 (0.079)
Distance of compartment to
compartment
P 1
12±0.1 (0.472)
Package Type
MOC306XS series(TA/TA1)
Quantities(pcs)
1000
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
8
9. Temperature Profile Of Soldering
(1).IR Reflow soldering (JEDEC-STD-020C compliant)
One time soldering reflow is recommended within the condition of temperature and time
profile shown below. Do not solder more than three times.
Profile item
Conditions
Preheat
- Temperature Min (TSmin )
- Temperature Max (TSmax )
- Time (min to max) (ts)
150˚C
200˚C
90±30 sec
Soldering zone
- Temperature (TL )
- Time (tL)
217˚C
60 sec
Peak Temperature(TP)
260˚C
Ramp-up rate
3˚C / sec max.
Ramp-down rate
3~6˚C / sec
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
9
(2) .Wave soldering (JEDEC22A111 compliant)
One time soldering is recommended within the condition of temperature.
Temperature
Time
260+0/-5˚C
10 sec
Preheat temperature
Preheat time
5 to 140˚C
30 to 80 sec
(3).Hand soldering by soldering iron
Allow single lead soldering in every single process. One time soldering is recommended.
Temperature
Time
380+0/-5˚C
3 sec max
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
10
10. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
11
11. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE)
Shenzhen Orient Tech Ltd . Co ., Ltd MOC306X
Copyright© 2018 Orient .All rights Reserved A0
12