Phone: +39-010-667 8800 Fax: +39-010-667 8812 Web: www.gpsemi.it E-mail: info@gpsemi.it GPS - Green Power Semiconductors SPA Factory: Via Ungaretti 10, 16157 Genova, Italy Green Power Semiconductors GC118...R BAR CLAMP FOR HOCKEY PUKS Various lenghts of bolts and insulators Round shaped clamping head for optimal clamping force application Pre-loaded to the specific clamping force Four clamps styles Gold iridite plating User friendly clamping force indicator UL94 certified insulation material 145 S T 12 14 25 29 48 4 S T 12 27.40.2 27.40.2 73 25 14 145 118 118 GC1182BN...R GC118BR...R 145 12 14 S S 12 T 27.40.2 T 27.40.2 14 145 118 118 GC118SN...R GC118SR...R Dimensions in millimeters T: Max total height (see table) S: Clearance allowed (see table) Document GC118...RT001 Green Power GC118...R BAR CLAMP FOR HOCKEY PUKS Semiconductors Parameter Unit Weight g Clamping Force* kN VRMS Insulation Voltage Insulating Material Types/Testing conditions/Notes Values Min Max GC118S... 930 1030 GC118B... 1750 1870 GC118...22 22 GC118...24 24 GC118...30 30 GC118...32 32 1 min 3000 Noryl UL File: E121562 Max. working temperature C Min. working temperature C 110 -30 Storage temperature C -40/110 * Other clamping forces available: contact factory ORDERING INFORMATION TABLE GC118 Clamps can be ordered using the following part numbering system (1) Construction type: B N A B 20 (1) (2) (3) (4) (5) R S (6) B = with double bar S = with single bar (2) Insulator position: N = upper side R = lower side (3) Insulator code: (4) Bolt code: (5) Clamping force (in kN): see table below K K see table below 22 24 30 32 (6) Special accessories blank = no accessories S = extra metal spacer D = pressure disc in place of pressure bar K: Total thickness of the assembly to be clamped For thicknesses S' Min < K < S Min an additional 4 mm thick metal spacer is needed ( see list of special accessories) Type GC118BN...: suggested insulator/bolt types Allowed clearance S Insulator choice Bolt choice Max height 3 S' Min[mm]** S Min [mm] SMax [mm] (3) Ins. Lenght [mm] (4) Bolt Lenght [mm] T [mm] 15 19 25 B 70 A 110 125 25 29 35 B 70 B 120 135 35 39 45 B/C 70/95** C 130 145 45 49 55 C 95 D 140 155 55 59 65 C 95 E 150 165 65 69 75 D 120 F 160 175 ** with additional metal spacer only Type GC118BR...: suggested insulator/bolt types Allowed clearance S Insulator choice S Min [mm] SMax [mm] Bolt choice (3) Ins. Lenght [mm] (4) Max height Bolt Lenght [mm] T [mm] 4 S' Min[mm]** 15 19 25 A 50 A 110 139 25 29 35 A 50 B 120 149 35 39 45 A/B 50/70 C 130 159 45 49 55 B 70 D 140 169 55 59 65 B 70 E 150 179 65 69 75 C 95 F 160 189 ** with additional metal spacer only In the interest of product improvement Green Power Semiconductors reserves the right to change any specification given in this data sheet without notice. Document GC118...RT001 Green Power BAR CLAMP FOR HOCKEY PUKS GC118...R Semiconductors Type GC118SN...: suggested insulator/bolt types S' Min[mm]** Insulator choice S Min [mm] SMax [mm] Bolt choice Max height (3) Ins. Lenght [mm] (4) 24 28 33 B 70 A Bolt Lenght [mm] 110 T [mm] 120 34 38 43 B 70 B 120 130 44 48 53 B/C 70/95 C 130 140 54 58 63 C 95 D 140 150 64 68 73 C/D 95/120 E 150 160 74 78 83 D 120 F 160 170 3 Allowed clearance S ** with additional metal spacer only Type GC118SR...: suggested insulator/bolt types S' Min[mm]** Insulator choice S Min [mm] SMax [mm] Bolt choice (3) Ins. Lenght [mm] (4) Max height Bolt Lenght [mm] T [mm] 49 53 59 A 50 A 110 139 59 63 69 A 50 B 120 149 69 73 79 A/B 50/70 C 130 159 79 83 89 B 70 D 140 169 89 93 99 B 70 E 150 179 99 103 109 C 95 F 160 189 4 Allowed clearance S ** with additional metal spacer only SPECIAL ACCESSORIES The following special accessories are available Metal spacer Pressure disc Useful for grooved heatsink Suggested groove diameter 27mm +/- 0.5 In the interest of product improvement Green Power Semiconductors reserves the right to change any specification given in this data sheet without notice. Document GC118...RT001