9
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP CONNECTOR VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
MIP30 VARIANT
30 Size 16 Contacts MIP30WA10 VARIANT
10 Size 12 and 20 Size 20 Contacts
MIP30WB10 VARIANT
4 Size 8, 6 Size 16, 20 Size 20 Contacts
MIP29W9 VARIANT
3 Size 12, 20 Size 20, 6 Size 8 Contacts
MIP28W12 VARIANT
12 Size 12 and 16 Size 20 Contacts
Refer to page 8 for Application Specific Arrangements.
MIP24W8 VARIANT
2 Size 8 (High performance or standard
see page 27), 8 Size 12, 16 Size 20
Contacts
Only available for use with crimp contacts.
10
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Male Connector Dimensions Female Connector Dimensions
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP CONNECTOR OUTLINE AND
MOUNTING DIMENSIONS
MIP CONNECTOR MATING DIMENSIONS
Straight Board Mount
or Panel Mount
Female to Straight
Board Mount or
Panel Mount Male.
Right Angle Board
Mount Female to
Straight Board Mount
or Panel Mount Male.
Straight Board Mount
or Panel Mount
Female to Right
Angle Board Mount
Male.
Right Angle Board
Mount Female to
Right Angle Board
Mount Male.
MIP CONNECTOR OUTLINE DIMENSIONS
11
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP STRAIGHT SOLDER BOARD
MOUNT CONNECTORS
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT T O CHANGE.
MALE CONNECTOR SHOWN
FOR REFERENCE ONLY
12
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP STRAIGHT SOLDER
HOLE PATTERNS
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Hole pattern shown is for male connector; use mirror image for female connector.
CONTACT TERMINATION DIMENSIONS
13
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP STRAIGHT COMPLIANT
PRESS-FIT BOARD MOUNT
CONNECTORS
MALE CONNECTOR SHOWN FOR REFERENCE ONLY
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
14
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP STRAIGHT COMPLIANT
PRESS-FIT HOLE PATTERNS
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Hole pattern shown is for male connector; use mirror image for female connector.
15
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP RIGHT ANGLE SOLDER
BOARD MOUNT CONNECTORS
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT T O CHANGE.
MALE CONNECTOR SHOWN
FOR REFERENCE ONLY
16
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP RIGHT ANGLE SOLDER
HOLE PATTERNS
Hole pattern shown is for male connector; use mirror image for female connector.
17
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP RIGHT ANGLE COMPLIANT
BOARD MOUNT CONNECTORS
AND HOLE PATTERN
CONTACT TERMINATION DIMENSIONS,
MALE AND FEMALE
CONTACT HOLE PATTERN,
MALE AND FEMALE
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
18
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MINI-INFINITY
HIGH POWER
CONNECTOR SERIES
MIP ORDERING INFORMATION
ORDERING INFORMATION – CODE NUMBERING SYSTEM
Specify Complete Connector By Following Steps 1 Through 8
Insert “0” When Step Is Not Used
1 2 3 4 5 6
MIP 30 F93 0 0 A1
78
STEP 1 - Basic Series
MIP - Mini-Infinity
STEP 2 - Connector Variants
STEP 3 - Connector Gender
M- Male
F - Female
STEP 4 - Type of Contact
0 –Order contacts separately for cable connectors for connection
systems 2, 4 and 5.
3 –Solder, Straight Printed Board Mount with 3.70 (0.146) tail
extension for connection systems 1 and 4.
32- Solder, Straight Printed Board Mount with 9.58 (0.377) tail
extension for connection systems 1 and 4.
4 –Solder, Right Angle Printed Board Mount with 3.70 (0.146) tail
extension for connection systems 1, 2, 3 and 7.
42- Solder, Right Angle Printed Board Mount with 9.58 (0.377) tail
extension for connection systems 1, 2, 3 and 7.
63 –Press–Fit, Compliant Termination Right Angle Printed Board
Mount, for use with board thicknesses of 2.29 to 4.45 (0.090 to
0.175). With cross bar. Connection systems 1, 2, 3 and 7.
Available on connector variant 30 only.
93 –Press–Fit, Compliant Termination Straight Printed Board Mount for
use with board thicknesses of 2.29 to 4.45 (0.090 to 0.175).
Connection systems 1 and 4.
STEP 6 - Panel Mount
0 – None.
82 - Panel Mount 1.52 (0.060) panel thickness
83 - Panel Mount 2.28 (0.090) panel thickness
STEP 5 - Mounting Style
0 – None, mounting screws supplied with board mount connector.
N – Push-on fasteners supplied installed on board mount connector.
Not recommended for code 63 and 93.
STEP 7 - Contact Plating
0 –Crimp contacts ordered separately
A1 –Gold flash over nickel on mating end
and gold flash over nickel on termina-
tion end.
A2 –Gold flash over nickel on mating end
and 5.00 microns (0.000200 inch) sol-
der coat on termination end. Not
available with contact types 63 and
93.
C1 –0.80 microns (0.000030 inch) gold
over nickel on mating end and 0.80
microns (0.000030 inch) gold over
nickel on termination end.
C2 –0.80 microns (0.000030 inch) gold
over nickel on mating end and 5.00
microns (0.000200 inch) solder coat
on termination end. Not available with
contact types 63 and 93.
STEP 8 - Special Options
Consult Technical Sales
* Sequential Mating
* Recessed Female Contacts
* Customer Specified Contact Arrangement
* Other Customer Requirements
STEP
21W5 - 2 size 8, 3 size 12, and 16 size 20 contacts
Only available for use with crimp contacts.
28W12 - 12 size 12 and 16 size 20 contacts
29W9 - 3 size 12, 20 size 20, and 6 size 8 contacts
30 - 30 size 16 contacts
30WA10 - 10 size 12 and 20 size 20 contacts
30WB10 - 4 size 8, 6 size 16, and 20 size 20 contacts
DIMENSIONS ARE IN MILLIMETERS (INCHES).
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
