DG304A/305A/306A/307A Vishay Siliconix CMOS Analog Switches Low Level Switching Circuits Programmable Gain Amplifiers Portable and Battery Powered Systems 15-V Input Range Fast Switching--tON: 110 ns Low rDS(on): 30 Single Supply Operation CMOS Logic Levels Micropower: 30 nW Full Rail-to-Rail Analog Signal Range Low Signal Error Wide Dynamic Range Low Power Dissipation The DG304A through DG307A series of monolithic CMOS switches were designed for applications in communications, instrumentation and process control. This series is well suited for applications requiring fast switching and nearly flat on-resistance over the entire analog range. applications, without sacrificing switching speed. Break-before-make switching action is guaranteed, and an epitaxial layer prevents latchup. Single supply operation (for positive switch voltages) is allowed by connecting the V- rail to 0 V. Designed on the Vishay Siliconix PLUS-40 CMOS process to achieve low power consumption and excellent on/off switch performance, these switches are ideal for battery powered Each switch conducts equally well in both directions when on, and blocks up to the supply voltage when off. These switches are CMOS input compatible. DG304A DG304A Dual-In-Line Metal Can V+ (Substrate and Case) NC D1 NC S1 NC IN1 GND 1 14 2 13 3 12 4 11 V+ D1 D2 D2 10 1 NC 9 S1 2 S2 5 10 NC 6 9 IN2 7 8 V- S2 IN1 8 7 3 6 4 NC 5 V- IN2 Logic Switch 0 OFF 1 ON Logic "0" 3.5 V 1 11 V Logic "1" GND Top View Document Number: 70045 S-52880--Rev. C, 28-Apr-97 Top View www.vishay.com FaxBack 408-970-5600 4-1 DG304A/305A/306A/307A Vishay Siliconix DG305A DG305A Dual-In-Line Metal Can V+ (Substrate and Case) NC D1 NC S1 NC IN GND 1 14 2 13 12 3 11 4 V+ D1 D2 NC 10 NC 6 9 NC 7 8 V- S2 2 IN 9 S1 S2 5 D2 10 1 7 SW1 0 OFF ON 1 ON OFF NC 5 SW2 Logic "0" 3.5 V 1 11 V Logic "1" 6 4 NC Logic 8 3 V- GND Top View Top View DG306A Dual-In-Line NC V+ 1 14 S3 2 13 S4 Logic Switch D3 3 12 D4 0 OFF D1 4 11 D2 S1 5 10 S2 IN1 6 9 IN2 7 8 GND 1 ON Logic "0" 3.5 V Logic "1" 11 V V- Top View DG307A Dual-In-Line NC S3 D3 Four SPST Switches per Package 14 2 13 S4 Logic 12 D4 0 OFF ON 1 ON OFF 3 D1 4 11 D2 S1 5 10 S2 IN1 6 9 IN2 7 8 GND V+ 1 SW1, SW2 SW3, SW4 Logic "0" 3.5 V Logic "1" 11 V V- Top View www.vishay.com FaxBack 408-970-5600 4-2 Document Number: 70045 S-52880--Rev. C, 28-Apr-97 DG304A/305A/306A/307A Vishay Siliconix Temp Range Package Part Number DG304A -0 to 70_C 14-Pin Plastic DIP DG304ACJ DG304AAK/883 14-Pin CerDIP JM38510/11605BCA -55 55 to 125 125_C C 10-Pin Can JM38510/11605BIA 14-Pin Sidebraze JM38510/11605BCC 14-Pin CerDIP JM38510/11605BCA 10-Pin Can JM38510/11606BIC 14-Pin Sidebraze JM38510/11606BCA DG305A -55 55 to 125_C 125 C DG306A -0 to 70_C 14-Pin Plastic DIP DG306ACJ DG306AAK/883 14-Pin CerDIP -55 125_C 55 to 125 C JM38510/11607BCA 14-Pin Sidebraze JM38510/11607BCC DG307A 0 to 70_C 14-Pin Plastic DIP -25 to 85_C DG307ACJ DG307ABK DG307AAK 14 Pi CerDIP 14-Pin C DIP DG307AAK/883 -55 55 to 125 125_C C JM38510/11608BCA 14-Pin Sidebraze JM38510/11608BCC Voltages Referenced to V- V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 V GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V Power Dissipationb 14-Pin Plastic DIPc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 mW 14-Pin CerDIPd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825 mW 10-Pin Metal Cane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 mW Digital Inputsa, VS, VD . . . . . . . . . . . . . . . . . . . . . . . . . (V-) -2 V to (V+) +2V or 30 mA, whichever occurs first Current, Any Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Continuous Current, S or D (Pulsed at 1 ms, 10% duty cycle max) . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA Storage Temperature Document Number: 70045 S-52880--Rev. C, 28-Apr-97 (AAA, AAK, ABK Suffix) . . . . . . -65 to 150_C (ACJ Suffix) . . . . . . . . . . . . . . . . . -65 to 125_C Notes: a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 11 mW/_C above 75_C d. Derate 6.5 mW/_C above 25_C e. Derate 6 mW/_C above 75_C www.vishay.com S FaxBack 408-970-5600 4-3 DG304A/305A/306A/307A Vishay Siliconix B, C Suffix Test Conditions Unless Specified A Suffix -25 to 85_C 0 to 70_C -55 to 125_C V+ = 15 V, V V- = -15 V VIN = 3.5 V or 11 Vf Tempb VANALOG Full Drain-Source On-Resistance rDS(on) VD = 10 V, IS = 10 mA Room Full 30 Source Off Leakage Current IS(off) VS = 14 V VD = 14 V Room Full 0.1 -1 -100 1 100 -5 -100 5 100 Drain Off Leakage Current ID(off) VS = 14 V VD = 14 V Room Full 0.1 -1 -100 1 100 -5 -100 5 100 Drain On Leakage Current ID(on) VD = VS = 14 V Room Full 0.1 -2 -200 2 200 -5 -200 5 200 VIN = 5 V Room Full -0.001 -1 -1 VIN = 15 V Room Full 0.001 VIN = 0 V Room Full -0.001 Room 110 250 Room 70 150 tOPEN DG305A/307A ONLY See Figure 3 Room 50 Q CL = 1 nF, Rgen = 0 Vgen = 0 V, See Figure 4 Room 30 Room 14 Room 14 P Parameter S b l Symbol Typc Mind Maxd Mind Maxd U i Unit Analog Switch Analog Signal Rangee -15 15 -15 50 75 15 V 50 75 W nA A Digital Control Input p Current with ith IInputt Voltage V lt High Hi h Input Current with Input Voltage Low IINH IINL -1 1 1 1 -1 -1 mA A -1 Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Break-Before-Make Time Charge Injection Source-Off Capacitance CS(off) Drain-Off Capacitance CD(off) Channel-On Capacitance CD(on) Input Capacitance CIN See Figure 2 f = 1 MHz, MHz VS = 0 V VS, VD = 0 V f = 1 MHz Room 40 VIN = 0 V Room 6 VIN = 15 V Room 7 Off-Isolation OIRR VIN = 0 V,, RL = 1 kW Room 62 Crosstalk (Channel-to-Channel) XTALK VS = 1 V rms, f = 500 kHz Room 74 Room Full 0.001 Room Full -0.001 ns pC pF F dB Power Supplies Positive Supply Current I+ VIN = 15 V or 0 V (All Inputs) I t ) Negative Supply Current I- 10 100 -10 -100 100 -100 mA Notes: a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25_C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. www.vishay.com S FaxBack 408-970-5600 4-4 Document Number: 70045 S-52880--Rev. C, 28-Apr-97 DG304A/305A/306A/307A Vishay Siliconix _ rDS(on) vs. VD and Power Supply rDS(on) vs. VD and + Power Supply Voltage ) ) 100 80 5 V 60 7.5 V 40 10 V 15 V 20 20 V TA = 25_C V- = 0 V 100 +7.5 V r DS(on)- Drain-Source On-Resistance ( r DS(on)- Drain-Source On-Resistance ( TA = 25_C 80 +10 V 60 +15 V +20 V 40 20 0 0 -20 -15 -10 -5 0 5 10 15 20 0 5 VD - Drain Voltage (V) 10 15 20 VD - Drain Voltage (V) Input Switching Threshold vs. V+ and V- Supply Voltages Leakage Currents vs. Analog Voltage 10 10 TA = 25_C 9 0 ID(off) or IS(off) 8 7 6 ID(on) V T (V) I S, I D (pA) -10 -20 5 4 3 -30 2 1 -40 0 -15 -12 -9 -6 -3 0 3 6 9 12 15 5 0 15 20 V+, V- Positive & Negative Supplies (V) VD or VS - Drain or Source Voltage (V) Switching Time vs. Positive Supply Voltage Switching Time vs. Negative Supply Voltage 240 240 V- = -15 V TA = 25_C VINH = 15 V VINL = 0 V 200 V+ = 15 V TA = 25_C VINH = 15 V VINL = 0 V 200 tON t ON , t OFF (ns) t ON , t OFF (ns) 10 160 120 tOFF 80 160 tON 120 tOFF 80 40 40 0 5 10 V+ - Positive Supply Voltage (V) Document Number: 70045 S-52880--Rev. C, 28-Apr-97 15 0 -5 -10 -15 V- - Negative Supply Voltage (V) www.vishay.com S FaxBack 408-970-5600 4-5 DG304A/305A/306A/307A Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Supply Currents vs. Toggle Frequency 8 V+ = 15 V RL = CL = 0 VS = Open I+, I- (mA) 6 4 2 0 1k 10 k 100 k 1M f - Frequency (Hz) SCHEMATIC DIAGRAM (TYPICAL CHANNEL) V+ S V- Level Shift/ Drive VIN V+ GND D V- FIGURE 1. TEST CIRCUITS +15 V Logic "1" = Switch On V+ VS = 3 V S Logic Input D VINH 50% VO 0V IN RL 300 15 V CL 33 pF VS V- GND 90% 10% 0V -15 V CL (includes fixture and stray capacitance) VO = VS 4-6 tON tOFF RL RL + rDS(on) www.vishay.com S FaxBack 408-970-5600 Switch Output FIGURE 2. Switching Time Document Number: 70045 S-52880--Rev. C, 28-Apr-97 DG304A/305A/306A/307A Vishay Siliconix +15 V V+ VS1 = 3 V VS2 = 3 V Logic "1" = Switch On Logic Input S1 D1 S2 D2 VO1 VO2 IN V- GND Switch Output RL1 300 W RL2 300 W CL1 33 pF CL2 33 pF VINH 50% 0V VS1 50% VO1 0V VS2 VO2 Switch Output 50% 0V tBBM -15 V CL (includes fixture and stray capacitance) FIGURE 3. Break-Before-Make SPDT (DG305A, DG307A) +15 V Rg V+ S IN Vg DVO D VO VO CL 1 nF 3V INX ON V- GND OFF ON Q = DVO x CL -15 V FIGURE 4. Charge Injection GND Voltage (V) VIN Logic Input Voltage VINH(min)/VINL(max) (V) VS or VD Analog Voltage Range (V) -15 0 11/3.5 -15 to 15 -20 0 11/3.5 -20 to 20 0 0 11/3.5 0 to 15 V+ Positive Supply Voltage (V) V- Negative Supply Voltage (V) 15 20 15 Notes: a. Application Hints are for DESIGN AID ONLY, not guaranteed and not subject to production testing. Document Number: 70045 S-52880--Rev. C, 28-Apr-97 www.vishay.com FaxBack 408-970-5600 4-7 DG304A/305A/306A/307A Vishay Siliconix +15 V -15 V 10 k VIN 10 k VOUT +15 V -15 V 10 k 10 k 100 k 1 M A1 A0 DG304A Binary Input Gain 11 10 01 00 1 10 100 1000 FIGURE 5. Low Power Binary to 10n Gain Low Frequency Amplifier +15 V -15 V -15 V VIN1 +15 V VOUT VIN2 CMOS Logic Input Select High = VIN1 -15 V +15 V CMOS Logic Gain Select High = 10x 1x 10x DG307A GND 20 k 180 k FIGURE 6. Low Power Non-Inverting Amplifier with Digitally Selectable Inputs and Gain www.vishay.com FaxBack 408-970-5600 4-8 Document Number: 70045 S-52880--Rev. C, 28-Apr-97 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1