MT9V111 Increase Driver Awareness with a Crystal-Clear Second Set of Eyes Aptina's Image Sensor for Automotive Displays Our MT9V111 automotive image sensor helps increase drivers' awareness of what occurs in and around their vehicles. That's because our unique low-noise, stabletemperature design enables it to capture extraordinarily clear images. Needing less than the amount of light from a single candle, the MT9V111 outputs crisp images for automotive display applications that are just as effective on the darkest nights as on the brightest days: * * * * * * * Rear video Blind spot assistance Side view Mirror replacement Parking assistance Passenger viewing Accident reconstruction Use Automotive Sensors for Automotive Imaging The performance requirements of automotive image sensors differ from those of PC cameras and digital cameras. We designed the MT9V111 for the extreme automotive environment. It boasts an operating temperature range of -40C to +85C. It comes in a 52-pin iBGA package that stands up to automotive environmental standards. And it outputs full-color video at VGA resolution, so drivers can clearly identify scenes on automotive displays. All-Inclusive Camera System Reduces Parts and Costs The MT9V111 is a complete camera system-on-a-chip (SOC). Its programmable on-chip processor performs extensive camera functions including color recovery and correction; gamma correction; sharpening; auto black level offset correction; auto exposure, lens shading, flicker detection and avoidance, white balance; and onthe-fly defect identification and correction. With all the necessary functionality built in, this all-in-one solution reduces the bills of materials and the costs of driver awareness systems. How to Buy Production and sample quantities of Aptina products may be ordered through qualified distributors. See our Web site for details. You may also request access to NDA data sheets and other technical documentation by visiting our Web site. MT9V111 Specifications * Pixel Size: 5.6m x 5.6m * ADC: * Array Format (Active): 640H x 480V * Data Rate: 12-13.5 megapixels per second (master clock, 24-27 MHz) * Imaging Area: 3.584mm x 2.688mm * Responsivity: * Color Filter Array: RGB Bayer color filters * Data Output ITU_R BT.656 (YCbCr), Formats: YUV 4:2:2 (progressive), 656RGB, 555RGB, and 444RGB * Optical Format: 1/4 inch (4:3) * Frame Rates: 30 fps @ 640H x 480V * Scan Mode: Progressive * Shutter: Electronic rolling shutter (ERS) * Window Size: Programmable to VGA, QVGA, CIF, and QCIF * Automotive Exposure, white balance, black Functions: level offset correction, flicker avoidance, color satur ation, defect identification and correction, frame rate, and back light compensation * Programmable Gain, frame rate, ADC reference, Controls: left-right and top-bottom image reversal 10-bit, on-chip 1.9 V/lux-sec (550nm) * Dynamic Range: 60dB * Maximum Analog Gain: 16 * Supply Voltage: 2.8V 0.25V * Power Consumption: <120mW (@ 30 fps) * Operating Temp. Range: -40C to +85C * Storage Temp. Range: -40C to +125C * Package: 52-ball iBGA, die in reconstructed wafer form, automotive-qualified Block Diagram Communication Bus SCLK SDATA SADDR Image Flow Processor Sensor Core DOUT (7:0) PIXCLK CLK FRAME_VALID STANDBY LINE_VALID OUTPUT_EN_BAR FLASH VDD_DGND VAA_AGND VAA_PIX SRAM Line Buffers aptina.com Products are warranted only to meet Aptina's production data sheet specifications. Aptina and the Aptina logo are trademarks of Aptina Imaging Corporation. All other trademarks are the property of their respective owners. (c)2011 Aptina Imaging Corporation. All rights reserved. 05/11/11 EN.L