https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Distribution block, Block with horizontal alignment and integrated supply, nom. voltage: 690 V, nominal current: 24 A, connection method: Push-in connection, Push-in connection, number of connections: 7, cross section: 0.14 mm - 4 mm, AWG: 26 - 12, width: 25.6 mm, color: white, mounting type: NS 35/7,5, NS 35/15 Your advantages Time savings of up to 80%, thanks to ready-to-mount blocks without manual bridging Time-saving conductor connection, thanks to tool-free Push-in direct connection technology Clear wiring, thanks to eleven different color variants Flexible use, thanks to DIN rail mounting, direct mounting or adhesive mounting Space savings of up to 50% on the DIN rail, thanks to transverse mounting Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4055626391670 Weight per Piece (excluding packing) 22.000 g Custom tariff number 85369010 Country of origin Poland Technical data General Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories Number of levels 1 Number of connections 7 02/06/2019 Page 1 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Technical data General Potentials 1 Nominal cross section 2.5 mm Nominal cross section feed-in 6 mm Color white Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment) Maximum load current 57 A Nominal current IN 24 A Nominal voltage UN 690 V Maximum load current 57 A (with 10 mm conductor cross section) Nominal current IN 41 A (with 6 mm conductor cross section) Nominal voltage UN 500 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.5 mm / 0.3 kg 2 6 mm / 1.4 kg 10 mm / 2 kg 0.14 mm / 0.2 kg 2.5 mm / 0.7 kg 4 mm / 0.9 kg 02/06/2019 Page 2 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Technical data General Tensile test result Test passed Conductor cross section tensile test 0.5 mm Tractive force setpoint 20 N Conductor cross section tensile test 6 mm Tractive force setpoint 80 N Conductor cross section tensile test 10 mm Tractive force setpoint 90 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N Result of voltage-drop test Test passed Requirements, voltage drop 1.6 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 6 mm Short-time current 0.72 kA Conductor cross section short circuit testing 10 mm Short-time current 1.2 kA Result of thermal test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) 2 2 02/06/2019 Page 3 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Technical data General Relative insulation material temperature index (Elec., UL 746 B) 130 C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 C Static insulating material application in cold -60 C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 25.6 mm Length 45.7 mm Height NS 35/7,5 30.9 mm Connection data Feed-in connection Feed-in stage Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm Conductor cross section solid max. 4 mm Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm Conductor cross section flexible max. 2.5 mm Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm 02/06/2019 Page 4 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Technical data Connection data Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.5 mm Conductor cross section solid max. 10 mm Conductor cross section AWG min. 20 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.5 mm Conductor cross section flexible max. 6 mm Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm sleeve, max. Stripping length 10 mm ... 12 mm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 02/06/2019 Page 5 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals DNV GL / CSA / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / cULus Recognized Ex Approvals Approval details 02/06/2019 Page 6 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Approvals DNV GL http://exchange.dnv.com/tari/ Nominal voltage UN 500 V Nominal current IN 24 A CSA TAE00002TT http://www.csagroup.org/services-industries/product-listing/ D B C Nominal voltage UN 600 V 300 V 300 V Nominal current IN 5A 50 A 50 A mm/AWG/kcmil 20-8 20-8 20-8 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm D B C Nominal voltage UN 600 V 300 V 300 V Nominal current IN 5A 50 A 50 A mm/AWG/kcmil 20-8 20-8 20-8 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm D B C Nominal voltage UN 600 V 300 V 300 V Nominal current IN 5A 50 A 50 A mm/AWG/kcmil 20-8 20-8 20-8 IECEE CB Scheme 13631 http://www.iecee.org/ Nominal voltage UN 630 V Nominal current IN 41 A FILE E 60425 FILE E 60425 DE1-60113 02/06/2019 Page 7 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Approvals VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 630 V Nominal current IN 41 A EAC cULus Recognized 40047797 RU CDE.AI30.B.01102 Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver 02/06/2019 Page 8 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver 02/06/2019 Page 9 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver 02/06/2019 Page 10 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored 02/06/2019 Page 11 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 Filler plug Filler plugs - CEC 2,5 - 3062757 Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT) with a width of 5.2 mm Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue 02/06/2019 Page 12 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black Insulating sleeve - ISH 2,5/0,2 - 3002843 Insulating sleeve, color: white 02/06/2019 Page 13 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories Insulating sleeve - ISH 2,5/0,5 - 3002856 Insulating sleeve, color: gray Insulating sleeve - ISH 2,5/1,0 - 3002869 Insulating sleeve, color: black Jumper Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red Plug-in bridge - FBS 2-5 GN - 3032143 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: green Plug-in bridge - FBS 2-5 BU - 3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue 02/06/2019 Page 14 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories Plug-in bridge - FBS 2-5 GY - 3038969 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: gray Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm Marker card - SK 3,8 REEL P5 WH CUS - 0825124 Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: continuous x 3.8 mm Marker card - SK 2,8 REEL P5,2 WH CUS - 8199986 Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 2.8 mm Marker card - SK 3,8 REEL P5,2 WH CUS - 8199989 Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 3.8 mm 02/06/2019 Page 15 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories Marker carriers Terminal strip marker carrier - KLM 2 - 0807575 Terminal strip marker carrier, gray, unlabeled, mounting type: Plug in, lettering field size: 20 mm x 8 mm Terminal strip marker carrier - KLM 3-L - 0814788 Terminal strip marker carrier, height-adjustable, for end brackets CLIPFIX 15, CLIPFIX 35 and CLIPFIX 35-5, can be labeled with BMK...20 x 8 labels, or directly with the M-PEN or X-PEN Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Terminal marking Marking foil for zack marker strip - TML (EX3,8)R - 0801837 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 3.8 mm 02/06/2019 Page 16 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories Marking foil for zack marker strip - TML (104X3,8)R - 0801833 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm Marking foil for zack marker strip - TML (104X3,8)R - 0801833 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm Marking foil for zack marker strip - TML (104X2,8)R - 0801832 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm Marking foil for zack marker strip - TML (EX3,8)R - 0801837 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 3.8 mm Marking foil for zack marker strip - TML (EX2,8)R - 0801836 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 2.8 mm 02/06/2019 Page 17 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories Marker for terminal blocks - US-TML (104X3,8) - 0830768 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm Marker for terminal blocks - US-TML (104X2,8) - 0830767 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm Marker card - SK U/2,8 WH:UNBEDRUCKT - 0803883 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm Test plug terminal block Test plugs - MPS-MT SN - 3212251 Test plugs, with solder connection up to 1 mm conductor cross section, tin-plated surface, color: silver 02/06/2019 Page 18 / 19 https://www.phoenixcontact.com/us/products/3273210 Distribution block - PTFIX 6/6X2,5-NS35A WH - 3273210 Accessories Test plugs - MPS-MT 1-S - 1944372 Test plug, consisting of 1.0 mm O test pin and 2.0 mm O socket Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm conductor cross section, color: gray Test socket Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch Phoenix Contact 2019 (c) - all rights reserved http://www.phoenixcontact.com 02/06/2019 Page 19 / 19