SIDACtor® Protection Thyristors
118
Revised: September 30, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
SLIC Protection
Battrax® Series - Single Port Negative - MS-013
1
3
25
(T)
(-VREF)
(R)
(G)
6(No Connect)
4(No Connect)
Electrical Characteristics
The Battrax® series offers programmable SIDACtor®
overvoltage protection devices for SLIC applications.
The Single Port Negative Battrax Series provides a
programmable device that is referenced to a negative
voltage souce while internal diodes provide protection
from positive surge events.
Description
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
Features and Benefits
• Low voltage overshoot
• Low on-state voltage
• Does not degrade with
use
• Fails short circuit when
surged in excess of
ratings
• Single-port protection
• Gate triggered tracking
device
• Integrated diodes for
positive voltage
Part Number Marking
VDRM
@lDRM=5µA
VS
@100V/µs IHISIT
VT
@IT=2.2 Amps VFCapacitance*
V min V max mA min mA max A max V max V max pF min pF max
B1101UALxx B1101UA I-VREFI + I-1.2VI I-VREFI + I-10VI 100 100 2.2 4 5 30 200
B1161UALxx B1161UA I-VREFI + I-1.2VI I-VREFI + I-10VI 160 100 2.2 4 5 30 200
B1201UALxx B1201UA I-VREFI + I-1.2VI I-VREFI + I-10VI 200 100 2.2 4 5 30 200
B1101UCLxx B1101UC I-VREFI + I-1.2VI I-VREFI + I-10VI 10 0 100 2.2 4 5 30 200
B1161UCLxx B1161UC I-VREFI + I-1.2VI I-VREFI + I-10VI 160 100 2.2 4 5 30 200
B1201UCLxx B1201UC I-VREFI + I-1.2VI I-VREFI + I-10VI 200 100 2.2 4 5 30 200
1
2
3
6
5
4
Applicable Global Standards
• TIA-968-A
• TIA-968-B
• ITU K.20/21 Enhanced
Level
• ITU K.20/21 Basic Level
• GR 1089 Inter-building
• GR 1089 Intra-building
• IEC 61000-4-5
• YD/T 1082
• YD/T 993
• YD/T 950
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are uni-directional
- All electrical characteristics shown are defined from Tip (pin 1) to Ground (pin 5), and Ring
(pin 3) to Ground (pin 5)
- VREF Max Value for the negative Battrax is -200 V.
- XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack).
* Off-state capacitance (CO) is measured across pins 1 & 5 and 3 & 5
at 1 MHz with a 2V bias.
SIDACtor® Protection Thyristors
119
Revised: September 30, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
SLIC Protection
IH
IDRM
VDRM VT
+V
+I
VS
IS
IT
V
-V
-I
IF
VREF
IPP
Pin 1-2:
PIN 2 CONNECTED TO GROUND
PIN 3 CONNECTED TO VREF
Surge Ratings
Series
IPP ITSM
50/60 Hz di/dt
0.2x310 1
0.5x700 2
2x10 1
2x10 2
8x20 1
1.2x50 2
10x160 1
10x160 2
10x560 1
10x560 2
5x320 1
9x720 2
10x360 1
10x360 2
10x1000 1
10x1000 2
5x310 1
10x700 2
A min A min A min A min A min A min A min A min A min A min A/µs max
A 20 150 150 90 50 75 75 45 75 20 500
C 50 500 400 200 150 200 175 100 200 50 500
Package Symbol Parameter Value Unit
Modified MS-013
1
2
3
6
5
4
TJOperating Junction Temperature Range -40 to +125 °C
TSStorage Temperature Range -65 to +150 °C
R0JA Thermal Resistance: Junction to Ambient 60 °C/W
Thermal Considerations
50
100
0
t
r
t
d
0
Peak
Value
Half Value
t – Time (µs)
I
PP
– Peak Pulse Current – %I
PP
t
r
= rise time to peak value
t
d
= decay time to half value
Waveform = t
r
x t
d
V-I Characteristics tr x td Pulse Waveform
25°C
Case Temperature (T
C
) - ºC
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20 020406080100 120140 160
Ratio of I
H
I
H
(T
C
= 25ºC)
Normalized VS Change vs. Junction Temperature
Normalized DC Holding Current vs. Case Temperature
PIN 5 CONNECTED TO GROUND
PIN 2 CONNECTED TO VREF
-8
-40 -20 020406080100 120140 160
-6
-4
0
2
4
6
8
10
12
14
Junction Temperature (T
J
) – °C
Percent of V
S
Change – %
25 °C
Notes:
1 Current waveform in µs
2 Voltage waveform in µs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPP ratings applicable over temperature range of -40ºC to +85ºC (IPP rating assumes VREF equals +/- 48 V)
- The device must initially be in thermal equilibrium with -40°C < TJ < +150°C
SIDACtor® Protection Thyristors
120
Revised: September 30, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
SLIC Protection
Part Numbering
B1 xx 1UxLxx
Battrax Series Positive MS-013 Part Numbering.eps
For pg. 131
TYPE
HOLDING CURRENT
PACKAGE TYPE
IPP RATING
RoHS COMPLIANT
CONSTRUCTION VARIABLE
PACKING OPTIONS
RP: Reel Pack
TP: Tube Pack
B1: Negative Battrax SIDACtor
10: 100 mA 16: 160 mA
20: 200 mA
Physical Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material UL recognized epoxy meeting flammability
classification 94V-0
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
Soldering Parameters
Environmental Specifications
Part Marking
High Temp Voltage
Blocking
80% Rated VREF Max. (VDC Peak ) +125°C or
+150°C, 504 or 1008 hrs. MIL-STD-750 (Method
1040) JEDEC, JESD22-A-101
Temp Cycling
-65°C to +150°C, 15 min. dwell, 10 up to 100
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/
JEDEC, JESD22-A-101
High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
+121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/
JEDEC, JESD22-A-102
Resistance to Solder
Heat +260°C, 30 secs. MIL-STD-750 (Method 2031)
Moisture Sensitivity
Level
85%RH, +85°C, 168 hrs., 3 reflow cycles
(+260°C Peak). JEDEC-J-STD-020, Level 1
Reflow Condition Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (Ts(min))+150°C
- Temperature Max (Ts(max))+200°C
- Time (Min to Max) (ts)60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak) 3°C/sec. Max.
TS(max) to TL - Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus) +217°C
- Temperature (tL)60-150 secs.
Peak Temp (TP)+260(+0/-5)°C
Time within 5°C of actual Peak Temp (tp)30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (TP)8 min. Max.
Do not exceed +260°C
XXXXXXX
XXXXX
Part Marking Code
(Refer to Electrical Characteristics Table)
Date Code
MS-013 Part Marking Drawing_2009-03-05.eps
SIDACtor® Protection Thyristors
121
Revised: September 30, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
SLIC Protection
Package Type Description Quantity Added Suffix Industry Standard
U
Modified MS-013 6-pin
Tape and Reel Pack 1500 RP EIA-481-D
Modified MS-013 6-pin
Tube Pack
500
(50 per tube) TP N/A
Packing Options
Tape and Reel Specification — MS-013
Interior of the Tube
.045
(1.14)
.165
(4.19)
.150
(3.81)
90˚
.525
(13.34)
A
.225
(5.72)
Message Location
.310
(7.87) .108
(2.74) .005
20.000 ± .030
(508.00 ± 0.76)
.020 ± .005
(0.51 ± 0.13) WALL TYP.
.110
(2.79)
A
6
Dimensions are in inches
(and millimeters)
Direction of Feed
0.700
(17.8)
.512 (13.0) Arbor
Hole Dia.
12.99
(330)
.630
(16.0)
Dimensions are in inches
(and millimeters)
.472
(12.0)
.157
(4.0)
Tube Pack Specification — MS-013
Dimensions — MS-013
7º TYP
E
D
A
B
Mold Split
Line
A
7º TYP
7º TYP
Pad Outline
0.065
(1.65)
0.460
(11.68)
0.138
(3.50) 0.059
(1.50)
C
A
F7º TYP
G
J
H
Dimension are in inches
(and millimeters).
Burr Side
MIN Length
of Flat
4º
96º
Detail A
K
BSC*
Dimensions Inches Millimeters
Min Max Min Max
A0.360 0.364 9.14 9.25
B0.352 0.356 8.94 9.04
C0.400 0.412 10.16 10.46
D0.043 0.045 1.09 1. 13
E0.047 0.055 1. 1 9 1.40
F0.293 0.297 7.44 7.54
G0.289 0.293 7.34 7.44
H0.089 0.093 2.26 2.36
J0.041 0.049 1.04 1.24
K0.020 0.51
BSC* 0.133 0.143 3.38 3.63
* BSC = Basic Spacing between Centers
