The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW o Ultra- Miniature Push-on Lock Coaxial Connectors 75o PL75 Series PL75 and PL71 Size Comparison Right-angle receptacles [PL71] 14.9 9.2 O3.95 7.2 5 O2.65 [PL75] 9 4.5 O0.7 O0.7 Right-angle plugs [PL71] 14.4 6.7 [PL75] 13 9.3 14 5 O4.8 Features O6.5 Applications 1.Further reduction in size Reflecting the need for smaller devices, the size is reduced by approximately 30% when compared with the PL71 Series 75 Ohm connectors. Satellite digital networks, CATV, broadcasting equipment, visual equipment and other applications requiring highly reliable coaxial cable connections. 2.Secure lock Unique design of the lock/release, protected by outer shell, assures reliable and stable electrical and mechanical connection. 3.High degree of impedance matching V.S.W.R of 1.3 max for frequencies of DC to 1.5 GHz. 4. RoHS compliant All components and materials comply with the requirements of EU Directive 2002/95/EC. Mating Chart Plugs Receptacle Right-angle Straight PL75-P-1.5CV PL75-LR-PC Right-angle PL75-LP-1.5CV PL75-LP-1.5CW 2008.3 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.Lock Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. o Ultra- Miniature PL75 Series75o Push-on Coaxial Connectors Specifications Nominal characteristic impedance: 75o Frequency range : DC to 1.5 GHz Ratings Item Operating temperature range:-30C to +85C Operating humidity : RH 95% max. Specification Conditions 1. Insulation resistance 1,000 Mo min. 250 V DC 2. Withstanding voltage No flashover or insulation breakdown 250 V AC / 1 minute Center contact : 15 mo max. 3. Contact resistance 100 mA max. Outer shell: 6 mo max. 4. Center contact retention force 0.2 N min. Measured with 0.3 mm diameter pin gauge 5. V.S.W.R. * 1.3max. DC to 1.5GHz No electrical discontinuity of 1 s or longer Frequency: 10 to 500 Hz, single amplitude of 0.75 mm, No damage, cracks, or parts dislocation acceleration of 98m/s2, 2 hours in each of the 3 axis 6. Vibration Insulation resistance: 10 Mo min. (high humidity) 7.Moisture resistance 96 hours at +40c and humidity of 90% to 95% Insulation resistance: 1,000 Mo min. (dry) No damage, cracks, or parts dislocation Contact resistance Center contact : 19 mo max. 8. Temperature cycle Outer shell : 10 mo max. No damage, cracks, or parts dislocation Temperature:-30c +5c to +35c +85c +5c to +35c Time: 30 min. 5 min.max. 30 min. 5 min.max. 5 cycles Contact resistance: Center contact : 19 mo max. 9. Durability Outer shell : 10 mo max. 500 cycles No damage, cracks, or parts dislocation 10. Salt spray 5% salt water solution, 48 hours No corrosion * V.S.W.R. Measurement System The above V.S.W.R. standard values were measured using the measurement system shown below. Network Analyzer Note 1: Cable connectors were measured with PL75 and BNC(75) connectors connected with 10cm long coaxial cable. Test Port Cable D .U . T Materials / Finishes Plugs Part Material Shell Male center contact Female center contact Insulator Crimp sleeve Brass Phosphor bronze Beryllium copper PTFE Brass Finish Gold plated Gold plated Gold plated --------------Nickel plated Receptacle Part Material Shell Male center contact Female center contact Insulator Ordering information PL75 1 2 2 3 Brass Phosphor bronze Beryllium copper PTFE Finish Gold plated Gold plated Gold plated --------------- :PL75 1 Series name Connector type 2 P :Straight plug LP :Right-angle plug LR :Right-angle plug receptacle 3 Applicable cable (plug) or board mounting (receptacle) style 1.5CV :1.5CCA-EXBV(LF) 1.5CW :1.5C-QEW.CW PC :DIP mounting The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on thePL75 HiroseSeries75o website RoHS search at www.hirose-connectors.com, contactCoaxial your Hirose sales representative. o UltraMiniature Push-onorLock Connectors Plugs Straight O4.8 16 All dimensions: mm Part Number CL No. Applicable cable RoHS PL75-P-1.5CV 334-0078-0 1.5CCA-EXBV(LF) YES *Must be terminated only with the specified cable. Right angle 13 9.3 5 O4.8 All dimensions: mm Part Number CL No. Applicable cable PL75-LP-1.5CV 334-0076-4 1.5CCA-EXBV(LF) PL75-LP-1.5CW 334-0080-1 1.5C-QEW.CW RoHS YES *Must be terminated only with the specified cable. Receptacle Right angle PCB mounting pattern 5 +0.1 0 O0.8 + O1 2.3 30.05 1.50.05 4- 30.05 1.50.05 4.5 O2.65 4.5 1 0. 0 O0.7 3 All dimensions: mm Part Number CL No. RoHS PL75-LR-PC 334-0075-1 YES 3