AMPHENOL MASS TERMINATED IDC CONNECTORS 841 SERIES D-SUBMINIATURE Amphenol 841 series connectors are suitable for compact requirements of modern peripheral equipment. Special contact design allows usage of standard .050" (1.27 mm) flat cable while maintaining the standard contact centers of .054" (1.37 mm). the one-piece universal hood provides three locking options: plastic latch for one-hand operation and quick disconnect, screw locking and metal spring latch locking. The hood accepts both straight and right angle cable entry for standard or jacketed cable. + Compatible with MIL-C-24308 and IEC proposal 48 B (CO) 118 Mass terminates to flat cable on .050" centers Mates with other D-Sub connectors Metal flange or all-plastic body Low profile RS-232 and RS-449 standard One-piece universal hood Strain relief specifications Number of Contacts: 9, 15, 25, 37 both pin and socket Contact Spacing: .054" (1.37mm) terminates standard .050" (1.27 mm) ribbon cable Contact Material: Phosphor bronze Contact Plating: Gold over nickel Insulator Material: Gray, glass filled polycarbonate, UL 94 VO Dielectric Withstanding voltage: 780 V eff. Insulation Resistance: 1000 m ohm min. at 500 VDC Contact Resistance: 10 m ohm max at 1 amp DC Mounting Flange: Metal, detents on male only Wire Accomodation: AWG 26 solid; AWG 28 stranded Standards: RS-232 and RS-449 Current Rating: 1 amp Voltage Rating: 25 VAC (VDE 0100 group A) Operating Temperature: - 25C to +105C (-67F to +221F) DIMENSIONS: See next page a co) Oo o c c le} oO 9 ordering information METAL FLANGE CONNECTOR WITH 4-40 THREADED INSERT PLASTIC CONNECTOR PART NUMBERS PART NUMBERS No. of No. of Contacts Receptacle Plug Contacts Receptacle Plug 9 841-17-DEFR-B9S 841-17-DEFR-B9P 9g 841-17-DEFR-DA9S 841-17-DEFR-DA9P 15 841-17-DAFR-B15S 841-17-DAFR-B15P 15 841-17-DAFR-DA15S | 841-17-DAFR-DA15P 25 841-17-DBFR-B25S 841-17-DBFR-B25P 25 841-17-DBFR-DA25S | 841-17-DBFR-DA25P 37 841-17-DCFR-B37S 841-17-DCFR-B37P 37 - 841-17-DCFR-DA37P METAL FLANGE CONNECTOR 50 POSITION METAL FLANGE CONNECTOR WITH 4-40 THREADED INSERT PART NUMBERS PART NUMBERS No. of No. of Contacts Receptacle Plug Contacts Receptacle Plug 9 841-17-DEFR-A9S 841-17-DEFR-A9P 50 841-17-DDFR-A50S 841-17-DDFR-A50P 15 841-17-DAFR-A15S 841-17-DAFR-A15P 25 841-17-DBFR-A25S 841-17-DBFR-A25P termination tooling: See page 58 37 841-17-DCFR-A37S 841-17-DCFR-A37P 42 AMPHENOL MASS TERMINATED IDC CONNECTORS D-SUBMINIATURE dimensions 9, 15, 25, 37 Position 50 Position plug connector 841 SERIES ze foe one vol || emer soca ooo] |] nenannan METAL SHELL plug connector Ne 25 ct 7 a Ey : be | O[ SEA) b ~ Lo" i wepeenennnl | nau receptacle connector S/S fd came cue a fay receptacie connector pivet SL. COREE) Lees ~ | || aoe eee ee] || rene bd oe No. of No. of Contacts A B Contacts A B 9 -984 (25.00) 1.205 (30.60) 50 2.406 (61.10) 2.914 (74.00) 15 1.311 (33.30) 1.531 (38.90) 25 1.852 (47.05) 2.078 (52.80) 37 2.500 (63.50) 2.718 (69305) panel cutouts Front or Rear Mount, 9 - 37 Positions 1 Rear Mount Only, 9 - 37 Positions a = Rear Mount Only, 50 Positions a | -4 I | | L NE (11.4) No. of Contacts 9 15 25 37 A 984 1.311 1.852 (47. 2.500 c 874 1.201 1.744 (44 2.390 No. of Contacts A B 9 .984 (25.00) .806 (20.5) 15 1.311 (33.30) 1.134 (28.80) 25 1.852 (47.05) 1.674 (42.50) 37 2.500 (63.50) 2.326 (59.10) 10 Connectors