CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PXG - Surface Mount Upgrade! Series PXG Super low ESR, high ripple current capability Rated voltage range : 16 to 25Vdc, Capacitance : 10 to 1,000F Case size : 5x4.5L to10x12.2L RoHS Compliant Halogen Free Downsized PXE P36 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Failure Rate -55 to +105 16 to 25Vdc 20% (M) Rated voltagex1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours (E46,F45 : 1,000 hours) at 105. Appearance No significant damage Capacitance change 20% of the initial value DF (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours (E46,F45 : 500 hours). Appearance No significant damage Capacitance change 20% of the initial value DF (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k)and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value DF (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] EX) 25V47F Code : A W Size Code E46 E61 F45 F61 H70 HA0 JA0 JC0 P C0.2 B0.2 D0.5 Terminal MARKING 0.3max. L0.3 (Note) A0.2 Note : L+0.1/-0.2 for E46 and F45 L0.5 for HA0, JA0 and JC0 L A B C W D 5 4.5 5.3 5.3 5.9 0.5 to 0.8 5 5.8 5.3 5.3 5.9 0.5 to 0.8 6.3 4.4 6.6 6.6 7.2 0.5 to 0.8 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 8 6.7 8.3 8.3 9.0 0.7 to 1.1 8 10.0 8.3 8.3 9.0 0.7 to 1.1 10 10.0 10.3 10.3 11.0 0.7 to 1.1 10 12.2 10.3 10.3 11.0 0.7 to 1.1 P 1.4 1.4 1.9 1.9 3.1 3.1 4.5 4.5 G14A 47 25V PART NUMBERING SYSTEM 1 2 3 4 A PXG 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 100F:101) Taping code Terminal code Voltage code (ex. 16V:160, 20V:200) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 28 CAT. No. E1001N CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXGSeries Upgrade! - STANDARD RATINGS WV (Vdc) 16 20 25 Cap (F) Size code 39 68 100 180 270 330 560 820 820 1,000 1,000 27 47 47 56 120 180 220 390 560 10 22 22 27 39 47 68 100 120 220 E46 F45 E61 F61 H70 HA0 HA0 JA0 JC0 JA0 JC0 E46 E61 F45 E61 F61 H70 HA0 HA0 JA0 E46 E61 F45 E61 F61 F61 H70 HA0 HA0 JA0 ESR Rated ripple current Leakage current (Amax/after 2min.) (mmax/20, 100k to 300kHz) (mArms/105, 100kHz) 312 544 320 576 864 1,050 1,790 2,620 2,620 3,200 3,200 270 188 470 224 480 720 880 1,560 2,240 125 110 275 135 195 235 340 500 600 1,100 50 40 27 22 22 21 18 16 12 18 12 55 30 42 30 25 25 23 20 18 60 40 45 40 30 30 28 24 22 20 1,860 2,450 3,000 3,300 3,300 3,400 3,900 4,200 5,400 4,100 5,400 1,770 2,800 2,400 2,800 3,200 3,200 3,400 3,700 4,100 1,700 2,450 2,350 2,450 2,800 2,800 3,000 3,300 3,500 3,800 Part No. APXG160ARA390ME46G APXG160ARA680MF45G APXG160ARA101ME61G APXG160ARA181MF61G APXG160ARA271MH70G APXG160ARA331MHA0G APXG160ARA561MHA0G APXG160ARA821MJA0G APXG160ARA821MJC0G APXG160ARA102MJA0G APXG160ARA102MJC0G APXG200ARA270ME46G APXG200ARA470ME61G APXG200ARA470MF45G APXG200ARA560ME61G APXG200ARA121MF61G APXG200ARA181MH70G APXG200ARA221MHA0G APXG200ARA391MHA0G APXG200ARA561MJA0G APXG250ARA100ME46G APXG250ARA220ME61G APXG250ARA220MF45G APXG250ARA270ME61G APXG250ARA390MF61G APXG250ARA470MF61G APXG250ARA680MH70G APXG250ARA101MHA0G APXG250ARA121MHA0G APXG250ARA221MJA0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 29 CAT. No. E1001N