8
G3VM-61A1/D1
MOS FET Relays
Compact, General-purpose, Analog-
switching MOS F ET Relay, with
Dielectric Strength of 2.5 kVAC between
I/O Using Optical Isolation
• Upgraded G3VM-61 A/D Series.
• Switches minute analog signals.
• Leakage current of 1 mA max. when output relay is open.
■Application Examples
• Measurement devices
• Security systems
• Amusement machines
Note: The actual product is marked differently from the image
shown here.
■List of Models
■Dimensions
Note: All units are in millimeters unless otherwise indicated.
■Terminal Arrangement/Internal Connections (Top View)
■PCB Dimensions (Bottom View) ■Actual Mounting Pad Dimensions
(Recommended Value, Top View)
Contact form Terminals Load voltag e (peak value) Model Number per stick Number per tape
SPST-NO PCB terminals 60 VAC G3VM-61A1 100 ---
Surface-mounting
terminals G3VM-61D1
G3VM-61D1(TR) --- 1,500
4.58±0.25
6.4±0.25
2.54±0.25
1.2±0.15
0.5±0.1
0.8±0.25 7.62±0.25
7.85 to 8.80
2.5 min.
3.65+0.15
−0.25
0.25+0.1
−0.05
4.58±
0.25
6.4±
0.25
2.54±
0.25
1.2±
0.15
7.62±
0.25
10.0 max. 1.0 min.
1.0
min.
3.65+0.15
−0.25 4.0+0.25
−0.2
G3VM-61A1 G3VM-61D1
Note: The actu al prod uct
is marked different-
ly from the image
shown her e.
Note: The actual product
is marked different-
ly from the image
shown here. Weight: 0.25 g Weight: 0.25 g
43
12
43
12
G3VM-61A1 G3VM-61D1
Four 0.8-dia. holes
2.54
2.54
(0.61)
(0.61)
(1.52)
(1.52)
G3VM-61A1
8.3 to 8.8
2.54
1.5
1.3
G3VM-61D1
9
G3VM-61A1/D1G3VM-61A1/D1
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
■Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
■Engineering Data
Load Current vs. Ambient Temperature
G3VM-61A1(D1)
■Safety Precautions
Refe r to page 6 fo r prec autions common to all G3VM models.
Item Symbol Rating Unit Measurement Conditions
Input LED forward current IF50 mA
Repetitive pea k LED forward
current IFP 1 A 100 ms pulses, 100 pps
LED forward current reduc-
tion rate D IF/°C-0.5 mA/°CTa ³ 25°C
LED reverse voltage VR5V
Connection temperature Tj125 °C
Output Output dielectric strength VOFF 60 V
Continuous load current IO500 mA
ON current reduction rate D ION/°C-5.0 mA/°CTa ³ 25°C
Connection temperature Tj125 °C
Dielectric strength between input and
output (See note 1.) VI-O 2,500 Vrms AC for 1 min
Operating temperature Ta-40 to +85 °C With no ic ing or condensation
Storage temperature Tstg -55 to +125 °C With no ic ing or condensation
Soldering temperature (10 s) --- 260 °C 10 s
Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Item Symbol Mini-
mum Typical Maxi-
mum Unit Measurem ent
conditions
Input LED forward voltage VF1.0 1.15 1.3 V IF = 10 mA
Reverse current IR--- --- 10 mAV
R= 5 V
Capacity between terminals CT--- 30 --- pF V = 0, f = 1 MHz
Trigger LED forward current IFT --- 1.6 3 mA IO = 500 mA
Output Maximum resistance with output ON RON --- 1 2 WIF = 5 mA,
IO = 500 mA
Current leakage when the relay is
open ILEAK --- --- 1.0 mAV
OFF = 60 V
Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance RI-O 1,000 --- --- MWVI-O = 500 VDC,
RoH £ 60%
Turn-ON time tON --- 0.8 2.0 ms IF = 5 mA, RL = 200 W,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- 0.1 0.5 ms
10% 90%
VOUT
IF
tON tOFF
IF1
2
4
3
RLVDD
VOUT
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Output dielectric strength VDD --- --- 48 V
Operating LED forward current IF57.525mA
Continuous load curren t IO--- --- 500 mA
Operating temperature Ta- 20 --- 65 °C
Ambient temperature (°C)
Load current (mA)
600
500
400
300
200
100
0−20 0 20 40 60 80 100
