NE5532, NE5532A DUAL LOW-NOISE OPERATIONAL AMPLIFIERS SLOS075C - NOVEMBER 1979 - REVISED JUNE 2000 D D D D D D D D D Equivalent Input Noise Voltage 5 nV/Hz Typ at 1 kHz Unity-Gain Bandwidth . . . 10 MHz Typ Common-Mode Rejection Ratio . . . 100 dB Typ High dc Voltage Gain . . . 100 V/mV Typ Peak-to-Peak Output Voltage Swing 32 VTyp With VCC = 18 V and RL = 600 High Slew Rate . . . 9 V/s Typ Wide Supply Voltage Range . . . 3 V to 20 V Designed to Be Interchangeable With Signetics NE5532 and NE5532A Package Options Include Plastic Small-Outline (PS) Package and Standard Plastic (P) DIP P OR PS PACKAGE (TOP VIEW) OUT IN- IN+ VCC- 1 8 2 7 3 6 4 5 VCC+ OUT IN- IN+ description The NE5532 and NE5532A are high-performance operational amplifiers combining excellent dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. The NE5532A has specified maximum limits for equivalent input noise voltage. The NE5532 and NE5532A are characterized for operation from 0C to 70C. AVAILABLE OPTIONS PACKAGED DEVICES PLASTIC DUAL-IN-LINE (P) TA 0C to 70C PLASTIC SMALL-OUTLINE (PS) NE5532P NE5532PS NE5532AP NE5532APS The PS package is available taped and reeled. Add the suffix R to the device type (e.g., NE5532PSR). symbol (each amplifier) IN+ + IN- - OUT Copyright 2000, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 NE5532, NE5532A DUAL LOW-NOISE OPERATIONAL AMPLIFIERS SLOS075C - NOVEMBER 1979 - REVISED JUNE 2000 schematic (each amplifier) VCC+ 36 pF IN+ 37 pF 14 pF 15 OUT 7 pF IN- 15 460 VCC- Component values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Supply voltage, VCC- (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -22 V Input voltage, either input (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Input current (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Note 5): P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC-. 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage. 3. Excessive input current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs unless some limiting resistance is used. 4. The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure the maximum dissipation rating is not exceeded. 5. The package thermal impedance is calculated in accordance with JESD 51. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 NE5532, NE5532A DUAL LOW-NOISE OPERATIONAL AMPLIFIERS SLOS075C - NOVEMBER 1979 - REVISED JUNE 2000 recommended operating conditions MIN NOM MAX UNIT Supply voltage, VCC+ 5 15 V Supply voltage, VCC- -5 -15 V 0 70 C Operating free-air temperature electrical characteristics, VCC = +15 V, TA = 25C (unless otherwise noted) TEST CONDITIONS PARAMETER MIN TA = 25C TA = 0C to 70C TYP MAX 0.5 4 VIO Input offset voltage VO = 0 IIO Input offset current TA = 25C TA = 0C to 70C 10 IIB Input bias current TA = 25C TA = 0C to 70C 200 VICR Common-mode input-voltage range VOPP Maximum peak-to-peak output-voltage swing AVD Large-signal g g differential-voltage amplification Avd Small-signal differential-voltage amplification BOM Maximum output swing bandwidth Maximum-output-swing B1 ri Unity-gain bandwidth zo Output impedance CMRR Common-mode rejection ratio kSVR Supply voltage rejection ratio (VCC/VIO) IOS ICC RL 600 RL 600 ,, VO = 10 V RL 2 k,, VO = 10 V 5 200 RL = 600 , 12 13 VCC = 15 V 24 26 VCC = 18 V TA = 25C 30 32 15 50 TA = 0C to 70C TA = 25C 10 TA = 0C to 70C 15 25 VO = 10 V VCC = 18 V, RL = 600 , VCC = 9 V to 15 V, Output short-circuit current Total supply curent Crosstalk attenuation (VO1/VO2) VO = 0, V01 = 10 V peak, V/mV No load f = 1 kHz kHz 10 MHz 30 300 k 0.3 70 100 dB 80 100 dB 10 38 60 mA 8 16 mA f = 10 kHz VO = 0 nA V/mV 100 100 CL = 100 pF nA V 140 VO = 14 V mV V 2.2 Input resistance AVD = 30 dB, VIC = VICR min 800 1000 f = 10 kHz RL = 600 , 150 UNIT 110 dB All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 NE5532, NE5532A DUAL LOW-NOISE OPERATIONAL AMPLIFIERS SLOS075C - NOVEMBER 1979 - REVISED JUNE 2000 operating characteristics, VCC = 15 V, TA = 25C PARAMETER SR NE5532 MIN Slew rate at unity gain Overshoot factor 4 TEST CONDITIONS Vn Equivalent input noise voltage In Equivalent input noise current TYP NE5532A MAX MIN TYP MAX 9 9 10% 10% f = 30 Hz 8 8 10 f = 1 kHz 5 5 6 f = 30 Hz 2.7 2.7 f = 1 kHz 0.7 0.7 VI = 100 mV, RL = 600 , AVD = 1, CL = 100 pF POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT V/s nV/Hz pA/Hz IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright 2000, Texas Instruments Incorporated