303134, 303135, 303136, 303137, 303138 Vishay Foil Resistors Models 303134 through to 303138 (Ultra High Precision Surface Mount Chip Resistors, VSMP Z-Foil Technology Configuration), Screen/Test Flow in Compliance with EEE-INST-002, (Tables 2A and 3A, Film/Foil, Level 1) and MIL-PRF-55342 FEATURES Temperature coefficient of resistance (TCR): 0.05 ppm/C typical (0 C to + 60 C) 0.2 ppm/C typical (- 55 C to + 125 C, + 25 C ref.) Tolerance: to 0.02 % Power coefficient "R due to self heating": 5 ppm at rated power Power rating: to 400 mW at + 70 C Top View Load life stability: to 0.03 % at 70 C, 2000 h at rated power INTRODUCTION Resistance range: 10 to 75 k The 303134 through to 303138 series is the first surface mount device to provide high rated power, excellent load life stability along with extremely low TCR all in one resistor. Vishay Foil resistors are not restricted to standard values, we can supply specific "as required" values at no extra cost or delivery (e.g. 1K2345 vs. 1K) The 303134 through to 303138 series has a full wraparound termination which ensures safe handling during the manufacturing process, as well as providing stability during multiple thermal cyclings. Our application engineering department is available to advise and make recommendations. TABLE 1 - TOLERANCE AND TCR VS. RESISTANCE VALUE (- 55 C to + 125 C, + 25 C ref.) RESISTANCE VALUE () TOLERANCE (%) MAXIMUM TCR (ppm/C) 250to 75K 0.02 3 100to < 250 0.05 3 50to < 100 0.1 4 25to < 50 0.25 5 10to < 25 0.5 5 Document Number: 63169 Revision: 29-Mar-10 Fast thermal stabilization < 1 s Electrostatic discharge (ESD) up to 25 000 V Short time overload: 0.02 % Non-inductive, non-capacitive design Rise time: 1 ns effectively no ringing Current noise: - 42 dB Voltage coefficient < 0.1 ppm/V Non-inductive: < 0.08 H Non hot spot design Terminal finish: tin/lead alloy Matched sets are available on request For prototype units, append a "U" to the model number (example: 303134U). These units have all of the table 2A (page 3) 100 % tests performed, with no destructive qualification testing required (table 3A, page 4). For more information, please contact foil@vishaypg.com FIGURE 1 - POWER DERATING CURVE Percent of Rated Power One of the most important parameters influencing stability is the temperature coefficient of resistance (TCR). Although the TCR of foil resistors is considered extremely low, this characteristic has been further refined over the years. The 303134 through to 303138 Series utilizes ultra high precision Bulk Metal(R) Z-Foil. The Z-Foil technology provides a significant reduction of the resistive element's sensitivity to ambient temperature variations (TCR) and to self heating when power is applied (power coefficient). Along with the inherently low PCR and TCR, Z-Foil technology also provides remarkably improved load life stability, low noise and availability of tight tolerance. + 70 C - 55 C 100 75 50 25 0 - 75 - 50 For any questions, contact: foil@vishaypg.com - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Ambient Temperature (C) www.foilresistors.com 1 303134, 303135, 303136, 303137, 303138 Vishay Foil Resistors FIGURE 2 - TRIMMING TO VALUES (Conceptual Illustration) FIGURE 3 - TYPICAL RESISTANCE/ TEMPERATURE CURVE TCR Values for Different Temperature Ranges + 500 + 400 Interloop Capacitance Reduction in Series + 300 Current Path Before Trimming + 200 + 100 R 0 R (ppm) - 100 Current Path After Trimming Mutual Inductance Reduction due to Opposing Current in Adjacent Lines 0.05 ppm/C - 200 Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance - 0.1 ppm/C 0.1 ppm/C - 300 0.14 ppm/C - 400 0.2 ppm/C - 0.16 ppm/C - 500 - 55 - 25 0 + 25 + 60 + 75 Ambient Temperature (C) + 100 + 125 Note * The TCR values for < 100 are influenced by the termination composition and result in deviation from this curve. Note: Foil shown in black, etched spaces in white TABLE 2 - DIMENSIONS AND LAND PATTERN in Inches (Millimeters) Recommended Land Pattern Top View L X G W T Footprint Z D MODEL (CHIP SIZE) L 0.005 (0.13) W 0.005 (0.13) THICKNESS MAXIMUM D 0.005 (0.13) Z (1) G (1) X (1) 303134 (0805) 0.080 (2.03) 0.050 (1.27) 0.025 (0.64) 0.015 (0.38) 0.122 (3.10) 0.028 (0.71) 0.050 (1.27) 303135 (1206) 0.126 (3.20) 0.062 (1.57) 0.025 (0.64) 0.020 (0.51) 0.175 (4.45) 0.059 (1.50) 0.071 (1.80) 303136 (1506) 0.150 (3.81) 0.062 (1.57) 0.025 (0.64) 0.020 (0.51) 0.199 (5.05) 0.083 (2.11) 0.071 (1.80) 303137 (2010) 0.198 (5.03) 0.097 (2.46) 0.025 (0.64) 0.025 (0.64) 0.247 (6.27) 0.115 (2.92) 0.103 (2.62) 303138 (2512) 0.249 (6.32) 0.127 (3.23) Note (1) Land Pattern Dimensions are per IPC-7351A 0.025 (0.64) 0.032 (0.81) 0.291 (7.39) 0.150 (3.81) 0.127 (3.23) TABLE 3 - SPECIFICATIONS MODEL (CHIP SIZE) RATED POWER (mW) at + 70 C MAX. WORKING VOLTAGE ( P R ) RESISTANCE RANGE () MAXIMUM WEIGHT (mg) 303134 (0805) 100 22 V 10to 5K 6 303135 (1206) 150 46 V 10to 14K 11 303136 (1506) 200 57 V 10to 16K 12 303137 (2010) 300 102 V 10to 35K 27 303138 (2512) 400 173 V 10to 75K 40 TABLE 4 - PERFORMANCES MIL-PRF-55342 CHARACTERISTIC E R LIMITS TEST OR CONDITIONS TYPICAL R LIMITS MAXIMUM R LIMITS (1) Thermal Shock, 100 x (- 65 C to + 150 C) 0.1 % Low Temperature Operation, - 65 C, 45 min at Rated Power 0.1 % 0.005 % (50 ppm) 0.02 % (200 ppm) Short Time Overload, 6.25 x Rated Power, 5 s 0.1 % 0.005 % (50 ppm) 0.02 % (200 ppm) High Temperature Exposure, + 150 C, 100 h 0.1 % 0.01 % (100 ppm) 0.03 % (300 ppm) Resistance to Soldering Heat 0.2 % 0.005 % (50 ppm) 0.02 % (200 ppm) Moisture Resistance 0.2 % 0.005 % (50 ppm) 0.04 % (400 ppm) 0.5 % 0.005 % (50 ppm) 0.03 % (300 ppm) Load Life Stability + 70 C for 2000 h at Rated Power Note (1) As shown + 0.01 to allow for measurement errors at low values. www.foilresistors.com 2 For any questions, contact: foil@vishaypg.com 0.005 % (50 ppm) 0.01 % (100 ppm) Document Number: 63169 Revision: 29-Mar-10 303134, 303135, 303136, 303137, 303138 Vishay Foil Resistors FIGURE 4 - RECOMMENDED MOUNTING (1)(2)(3) 25 % to 85 % of T A low profile solder fillet is recommended to avoid unnecessary stresses along top edge of metallization. IR and vapor phase reflow are best. Notes (1) Avoid the use of cleaning agents which could attack epoxy resins, which form part of the resistor construction (2) Vacuum pick up is recommended for handling (3) Soldering iron may damage the resistor MODEL NUMBER CHIP SIZE VALUE RANGE (SPACE APPLICATIONS) RATED POWER AT 70 C 303134 303135 303136 303137 303138 0805 1206 1506 2010 2512 10 to 5 k 10 to 14 k 10 to 16 k 10 to 35 k 10 to 75 k 100 mW 150 mW 200 mW 300 mW 400 mW Notes Measurement error allowed for R limits: 0.01 . (2) An additional 54 sample units per lot which successfully pass 100 % screening are to be used for destructive testing and are to be kept on file at the plant of manufacture. (3) Lot definition (1 lot = 1 primary flowcard): Each value per chip size should be qualified individually. Contact Vishay application engineering for alternative lot definitions. (4) For prototype units, append a "U" to the model number (example: 303134U). These units have all of the table 2A 100 % tests performed, with no destructive qualification testing required. (1) TABLE 5 - EEE-INST-002 (TABLE 2A FILM/FOIL, LEVEL 1) 100 % TESTS/INSPECTIONS Pre-cap Visual Inspection RC Record Thermal Shock Power Conditioning RC Record Performed in production flow prior overcoating In tolerance 25 x (- 65 C to + 150 C) 70 C, 100 h, 1.5 rated power - not to exceed max. voltage In tolerance R = 0.05 % for thermal shock and conditioning combined Final Inspection 5 % PDA on R only, 10 % PDA on "Out of Final Tolerance" Visual Inspection Materials, design, etc. Mechanical Inspection Document Number: 63169 Revision: 29-Mar-10 Physical dimensions, sample size: 3 units, zero failure For any questions, contact: foil@vishaypg.com www.foilresistors.com 3 303134, 303135, 303136, 303137, 303138 Vishay Foil Resistors TABLE 6 - EEE-INST-002 (TABLE 3A FILM/FOIL, LEVEL 1) DESTRUCTIVE TESTS Sample size: 3, zero failure Group 2 Solderability Sample size: 10, zero failure - mounted on FR4 TCR (- 55 C/+ 25 C/+ 125 C) Group 3 Values TCR limits 100 3 ppm/C 50 to < 100 4 ppm/C 10 to < 50 5 ppm/C Low temperature storage R = 0.02 % - 65 C no load dwell for 24 h 4 h + 25 C ambient no load dwell for 2 h to 8 h Low temperature operation R = 0.02 % - 65 C no load dwell for 1 h rated power for 45 min + 25 C ambient no load dwell for 24 h 4 h Short time overload R = 0.02 % 6.25 x rated power, 5 s - no "I" limitation: not to exceed twice the maximum voltage Sample size: 9, zero failure - mounted on FR4 Group 4 Resistance to soldering heat R = 0.02 % Performed per MIL-PRF-55342 para. 4.8.8.1 Sample size: 12, zero failure - mounted on FR4 Group 6 Life R = 0.03 % 2000 h, + 70 C, rated power Sample size: 10, zero failure - mounted on FR4 Group 7B Solder mounting integrity Performed per MIL-PRF-55342 For 0805, 1206, 1506: force applied: 2 kg, 30 s For 2010, 2512: force applied: 3 kg, 30 s Sample Size: 5, zero failure - chips not mounted Group 8 Voltage coefficient R = 0.1 ppm/V Applicable resistors 10K Performed per MIL-STD-202 method 309 Sample size: 5, zero failure - mounted on FR4 Group 9 High temperature exposure www.foilresistors.com 4 R = 0.03 % Performed per MIL-PRF-55342 100 h at + 150 C 5 C For any questions, contact: foil@vishaypg.com Document Number: 63169 Revision: 29-Mar-10 303134, 303135, 303136, 303137, 303138 Vishay Foil Resistors TABLE 7 - PART NUMBER IDENTIFICATION Model # Chip Size Value Range (Space Application) 303134 303135 303136 303137 303138 0805 1206 1506 2010 2512 10 to 5 k 10 to 14 k 10 to 16 k 10 to 35 k 10 to 75 k Part Number: {Model} - {Value} - {Tolerance} - {Termination} - {Packaging} Resistance Value Tolerance (Tightest) Code 250R to 75K 0.02 % Q 100R to < 250R 0.05 % A 50R to < 100R 0.1 % B 25R to < 50R 0.25 % C 10R to < 25R 0.5 % D Termination Code Packaging Code Tin/lead B Waffle W Tape and reel T Example: 303135 - 10K025 - DBW 1206 chip size, 10.025 k, 0.5 %, tin/lead termination, waffle packaging Document Number: 63169 Revision: 29-Mar-10 For any questions, contact: foil@vishaypg.com www.foilresistors.com 5 Legal Disclaimer Notice Vishay Precision Group Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay Precision Group"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group's terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group's knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document No.: 63999 Revision: 27-Apr-11 www.vishaypg.com 1