APPLICATION NOTES
Last updated on January 2018
© 2018 FRACTUS ANTENNAS, S.L. - 5
3.1. MATCHING NETWORK
The specs of a Fractus Antennas standard product are measured in their Evaluation Board,
which is an ideal case. In a real design, components nearby the antenna, LCD’s, batteries,
covers, connectors, etc. affect the antenna performance. This is the reason why it is highly
recommended placing pads compatible with 0402 and 0603 SMD components for a matching
network as close as possible to the feeding point. Do it in the ground plane area, not in the
clearance area. This provides a degree of freedom to tune the CUBE mXTENDTM Antenna
Booster once the design is finished and taking into account all elements of the system
(batteries, displays, covers, etc.).
Please notice that different devices with different ground planes and different components
nearby the CUBE mXTENDTM Antenna Booster may need a different matching network. To
ensure optimal results, the use of high Q and tight tolerance components is highly
recommended (Murata components). Please, if you need assistance contact
info@fractusantennas.com for more information related to the antenna booster matching
service.
824 – 960 MHz and 1710 – 2170 MHz
Figure 2 – Matching Network implemented in the evaluation board (Figure 1).
3.2. VSWR AND TOTAL EFFICIENCY
VSWR (Voltage Standing Wave Ratio) and Total Efficiency versus Frequency (GHz).
Figure 3 – VSWR and Total Efficiency for the 824 – 960 MHz frequency range and for the 1710 – 2170
MHz frequency range (from the evaluation board (Figure 1)).