V-730 P Vishay Sprague Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene FEATURES * Excellent AC performance * Low power dissipation * Low dielectric absorption * Close tolerance * High stability * Compliant to RoHS directive 2002/95/EC PERFORMANCE CHARACTERISTICS DC Life Test: 150 % of rated voltage for 1000 h at + 85 C. No open or short circuits. No visible damage. Maximum CAP 1.0 % Minimum IR = 50 % of initial limit Maximum DF = 0.12 % Operating Temperature: - 55 C to + 85 C Voltage Derating: At + 105 C, 50 % of + 85 C rating ESR: 20 kHz to 100 kHz Capacitance Range: 0.022 F to 10.0 F Capactiance Tolerance: 20 %, 10 %, 5 % DC Voltage Rating: 100 WVDC to 630 WVDC AC Voltage Rating: 70 VRMS to 275 VRMS, 60 Hz to 400 Hz Dissipation Factor: 0.1 % maximum Measure all units at 1000 Hz, at + 25 C DC Voltage Test: 200 % of rated voltage for 2 min AC Voltage Test: 130 % of rated RMS voltage at 60 Hz for 15 s Insulation Resistance: Measured at 100 WVDC after a 2 min charge. At + 25 C: 200 000 M/F or 400 000 M minimum At + 85 C: 10 000 M/F or 20 000 M minimum At + 105 C: 1000 M/F or 2000 M minimum Vibration Test (Condition B): No mechanical damage, short, open or intermittent circuits. Humidity Test: 95 % relative humidity at + 40 C for 250 h. No visible damage. Maximum CAP 1.0 % Minimum IR = 20 % of initial limit Maximum DF = 0.12 % AC Life Test: 110 % of rated RMS voltage at 60 Hz for 1000 h at + 85 C. Maximum CAP 5 % Minimum IR = 50 % of initial limit Maximum DF = 0.12 % PHYSICAL CHARACTERISTICS Lead Pull: 5 lb (2.3 kg) for one min. No physical damage. Lead Bend: After three complete consecutive bends. No damage. Marking: Sprague(R) trademark, type or part number, capacitance and voltage. DIMENSIONS in inches [millimeters] 1.750 [44.45] Min. L 0.062 [1.57] 1.750 [44.45] Min. D Max. Solid Tinned Wire (1) 0.032 [0.81] Nominal Dia. (No. 20 AWG) Note (1) Leads to be within 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge. Document Number: 42092 Revision: 12-Mar-09 For technical questions, contact: spresale@vishay.com www.vishay.com 25 V-730 P Vishay Sprague Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene STANDARD RATINGS in inches [millimeters] CAPACITANCE PART NUMBER (1) (F) ESR MAXIMUM RIPPLE CURRENT (m) (ARMS) at 20 kHz 20 kHz CASE TEMPERATURE (2) at to 100 kHz + 25 C + 35 C + 45 C + 55 C + 65 C + 75 C + 85 C L 100 WVDC 0.75 [19.0] 2.3 2.3 2.3 2.3 2.3 1.8 1.0 0.75 [19.0] 2.6 2.6 2.6 2.6 2.4 1.9 1.1 0.75 [19.0] 2.8 2.8 2.8 2.8 2.6 2.2 1.2 0.75 [19.0] 3.1 3.1 3.1 3.1 2.9 2.3 1.3 0.75 [19.0] 37.0 3.7 3.4 3.1 2.8 2.5 2.0 1.4 1.00 [25.4] 35.0 3.9 3.6 3.3 2.9 2.6 2.1 1.5 1.00 [25.4] 33.0 4.1 3.8 3.5 3.1 2.8 2.2 1.6 1.00 [25.4] 31.0 4.3 4.0 3.6 3.2 2.9 2.3 1.7 1.00 [25.4] 26.0 5.5 5.1 4.7 4.2 3.6 2.8 2.6 1.00 [25.4] 24.0 5.7 5.3 4.9 4.4 3.8 3.0 2.8 1.00 [25.4] 20.0 6.1 5.5 5.1 4.6 4.0 3.2 3.1 1.00 [25.4] 19.0 6.3 5.7 5.3 4.8 4.1 3.4 3.0 1.25 [31.8] 18.0 6.5 6.0 5.5 4.9 4.2 3.5 3.2 1.25 [31.8] 18.0 6.8 6.3 5.7 5.1 4.4 3.6 3.3 1.25 [31.8] 17.0 7.1 6.5 6.0 5.3 4.6 3.7 3.4 1.25 [31.8] 16.0 7.3 6.7 6.2 5.5 4.8 3.9 3.5 1.25 [31.8] 16.0 7.4 6.8 6.4 5.6 4.9 4.0 3.6 1.25 [31.8] 15.0 7.6 6.9 6.6 5.8 5.1 4.1 3.7 1.75 [44.5] 15.0 7.8 7.0 6.7 5.9 5.2 4.2 3.8 1.75 [44.5] 15.0 8.1 7.4 6.8 6.0 5.3 4.3 3.9 1.75 [44.5] 14.0 8.3 7.6 7.0 6.2 5.4 4.4 4.0 1.75 [44.5] 14.0 8.4 7.7 7.1 6.4 5.5 4.5 4.1 1.75 [44.5] 14.0 8.5 7.8 7.2 6.5 5.6 4.6 4.2 1.75 [44.5] 13.0 8.5 8.0 7.4 6.7 5.7 4.7 4.3 1.75 [44.5] 13.0 8.6 8.3 7.7 6.8 6.0 4.8 4.4 1.75 [44.5] 13.0 8.8 8.6 8.0 7.0 6.1 4.9 4.5 1.75 [44.5] 12.0 9.0 9.0 8.5 7.6 6.6 5.4 4.9 250 WVDC 0.75 [19.0] 1.5 1.5 1.5 1.5 1.5 1.5 0.9 0.75 [19.0] 1.9 1.9 1.9 1.9 1.9 1.7 1.1 0.75 [19.0] 2.3 2.3 2.3 2.3 2.3 1.9 1.1 0.75 [19.0] 2.7 2.7 2.7 2.7 2.5 2.0 1.2 1.00 [25.4] 1.9 1.9 1.9 1.9 1.9 1.9 1.3 1.00 [25.4] 2.4 2.4 2.4 2.4 2.4 2.2 1.4 1.00 [25.4] 2.9 2.9 2.9 2.9 2.9 2.3 1.5 1.00 [25.4] 3.4 3.4 3.4 3.2 2.9 2.3 1.6 1.00 [25.4] 35.0 3.8 3.7 3.6 3.4 2.9 2.4 1.7 1.00 [25.4] 33.0 3.9 3.8 3.7 3.5 3.1 2.5 1.8 1.25 [31.8] 32.0 4.0 3.9 3.8 3.7 3.2 2.6 1.9 1.25 [31.8] 31.0 4.2 4.1 4.0 3.9 3.4 2.8 2.0 1.25 [31.8] 28.0 4.4 4.4 4.4 4.4 4.3 3.5 3.2 1.25 [31.8] 27.0 4.7 4.6 4.5 5.0 4.5 3.7 3.3 1.25 [31.8] 26.0 5.1 5.0 4.9 5.4 4.7 3.9 3.5 1.25 [31.8] 25.0 5.9 5.8 5.7 5.7 5.0 4.1 3.7 1.25 [31.8] 21.0 7.2 7.2 6.8 6.0 5.2 4.3 3.9 1.75 [44.5] 20.0 8.4 7.5 7.0 6.3 5.4 4.5 4.1 1.75 [44.5] 19.0 8.6 7.8 7.3 6.6 5.7 4.7 4.3 1.75 [44.5] 18.0 9.0 8.3 7.6 6.8 5.9 4.8 4.4 1.75 [44.5] 18.0 9.0 8.4 7.8 7.0 6.0 4.9 4.5 1.75 [44.5] 17.0 9.0 8.5 8.0 7.2 6.2 5.0 4.6 1.75 [44.5] 16.0 9.0 8.6 8.2 7.4 6.3 5.1 4.7 1.75 [44.5] 16.0 9.0 8.8 8.5 7.7 6.6 5.3 4.9 1.75 [44.5] 15.0 9.0 9.0 8.8 7.9 6.8 5.6 5.1 1.75 [44.5] 15.0 9.0 9.0 8.9 8.0 7.0 5.8 5.3 1.75 [44.5] 15.0 9.0 9.0 9.0 8.2 7.2 5.9 5.5 2.25 [57.2] 15.0 9.0 9.0 9.0 8.4 7.4 6.0 5.6 2.25 [57.2] 14.0 9.0 9.0 9.0 8.7 7.8 6.3 5.8 2.25 [57.2] 14.0 9.0 9.0 9.0 8.8 7.9 6.4 5.9 2.25 [57.2] 13.0 9.0 9.0 9.0 8.9 8.3 6.8 6.2 CASE SIZE D 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.7 3.0 3.3 3.9 4.0 4.7 5.0 5.6 6.0 6.8 8.0 8.2 10.0 V-730P224X9100 V-730P274X9100 V-730P334X9100 V-730P394X9100 V-730P474X9100 V-730P564X9100 V-730P684X9100 V-730P824X9100 V-730P105X9100 V-730P125X9100 V-730P155X9100 V-730P185X9100 V-730P205X9100 V-730P225X9100 V-730P275X9100 V-730P305X9100 V-730P335X9100 V-730P395X9100 V-730P405X9100 V-730P475X9100 V-730P505X9100 V-730P565X9100 V-730P605X9100 V-730P685X9100 V-730P805X9100 V-730P825X9100 V-730P106X9100 0.275 [7.0] 0.298 [7.6] 0.324 [8.2] 0.347 [8.8] 0.376 [9.6] 0.321 [8.2] 0.348 [8.8] 0.377 [9.6] 0.421 [10.7] 0.454 [11.5] 0.500 [12.7] 0.541 [13.7] 0.486 [12.3] 0.507 [12.9] 0.554 [14.1] 0.581 [14.8] 0.606 [15.4] 0.654 [16.6] 0.537 [13.6] 0.577 [14.7] 0.593 [15.1] 0.624 [15.8] 0.644 [16.4] 0.682 [17.3] 0.735 [18.7] 0.743 [18.9] 0.815 [20.7] 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.7 3.0 3.3 3.9 4.0 4.7 5.0 5.6 6.0 6.8 8.0 8.2 10.0 V-730P104X9250 V-730P124X9250 V-730P154X9250 V-730P184X9250 V-730P224X9250 V-730P274X9250 V-730P334X9250 V-730P394X9250 V-730P474X9250 V-730P564X9250 V-730P684X9250 V-730P824X9250 V-730P105X9250 V-730P125X9250 V-730P155X9250 V-730P185X9250 V-730P205X9250 V-730P225X9250 V-730P275X9250 V-730P305X9250 V-730P335X9250 V-730P395X9250 V-730P405X9250 V-730P475X9250 V-730P505X9250 V-730P565X9250 V-730P605X9250 V-730P685X9250 V-730P805X9250 V-730P825X9250 V-730P106X9250 0.279 [7.1] 0.300 [7.6] 0.327 [8.3] 0.353 [9.0] 0.306 [7.8] 0.333 [8.5] 0.362 [9.2] 0.389 [9.9] 0.422 [10.7] 0.464 [11.8] 0.425 [10.8] 0.471 [12.0] 0.513 [13.0] 0.554 [14.1] 0.613 [15.6] 0.667 [17.0] 0.700 [17.8] 0.610 [15.5] 0.669 [17.0] 0.703 [17.9] 0.734 [18.6] 0.794 [20.2] 0.803 [20.4] 0.866 [22.0] 0.892 [22.7] 0.941 [23.9] 0.972 [24.7] 0.882 [22.4] 0.953 [24.2] 0.964 [24.5] 1.060 [26.9] Notes Other capacitance values and voltage ratings are available upon request (1) Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the "X9" in the Part Number to "X0"; for 5 %, from "X9" to "X5". (2) The peak current pulse capability ot these capacitors is 10 A/F. The maximum rate voltage change is 10 V/s. www.vishay.com 26 For technical questions, contact: spresale@vishay.com Document Number: 42092 Revision: 12-Mar-09 V-730 P Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene Vishay Sprague STANDARD RATINGS in inches [millimeters] CAPACITANCE (F) CASE SIZE PART NUMBER(1) D L 0.047 0.056 0.068 0.082 0.1 0.12 0.15* 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.7 3.0 3.3 3.9 V-730P473X9400 V-730P563X9400 V-730P683X9400 V-730P823X9400 V-730P104X9400 V-730P124X9400 V-730P154X9400 V-730P184X9400 V-730P224X9400 V-730P274X9400 V-730P334X9400 V-730P394X9400 V-730P474X9400 V-730P564X9400 V-730P684X9400 V-730P824X9400 V-730P105X9400 V-730P125X9400 V-730P155X9400 V-730P185X9400 V-730P205X9400 V-730P225X9400 V-730P275X9400 V-730P305X9400 V-730P335X9400 V-730P395X9400 0.258 [6.6] 0.275 [7.0] 0.297 [7.5] 0.320 [8.1] 0.348 [8.8] 0.299 [7.6] 0.328 [8.3] 0.353 [9.0] 0.385 [9.8] 0.421 [10.7] 0.469 [11.9] 0.503 [12.8] 0.545 [13.8] 0.506 [12.9] 0.551 [14.0] 0.599 [15.2] 0.655 [16.6] 0.712 [18.1] 0.658 [16.7] 0.716 [18.2] 0.752 [19.1] 0.786 [20.0] 0.865 [22.0] 0.909 [23.1] 0.951 [24.2] 1.031 [26.2] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 V-730P223X9630 V-730P273X9630 V-730P333X9630 V-730P393X9630 V-730P473X9630 V-730P563X9630 V-730P683X9630 V-730P823X9630 V-730P104X9630 V-730P124X9630 V-730P154X9630 V-730P184X9630 V-730P224X9630 V-730P274X9630 V-730P334X9630 V-730P394X9630 V-730P474X9630 V-730P564X9630 V-730P684X9630 V-730P824X9630 V-730P105X9630 0.283 [7.2] 0.307 [7.8] 0.334 [8.5] 0.358 [9.1] 0.388 [9.9] 0.418 [10.6] 0.346 [8.8] 0.374 [9.5] 0.408 [10.4] 0.443 [11.3] 0.496 [12.6] 0.538 [13.7] 0.496 [12.6] 0.542 [13.8] 0.593 [15.1] 0.639 [16.2] 0.696 [17.7] 0.608 [15.4] 0.664 [16.9] 0.724 [18.4] 0.794 [20.2] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] MAXIMUM RIPPLE CURRENT ESR (ARMS) at 20 kHz (m) 20 kHz to CASE TEMPERATURE (2) at 100 kHz + 25 C + 35 C + 45 C + 55 C + 65 C + 75 C + 85 C 400 WVDC 1.0 1.0 1.0 1.0 1.0 1.0 0.9 1.1 1.1 1.1 1.1 1.1 1.1 0.9 1.4 1.4 1.4 1.4 1.4 1.4 1.0 1.7 1.7 1.7 1.7 1.7 1.6 1.1 2.0 2.0 2.0 2.0 2.0 1.9 1.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.7 1.7 1.7 1.7 1.7 1.7 1.6 2.1 2.1 2.1 2.1 2.1 2.1 1.7 2.6 2.6 2.6 2.6 2.6 2.5 1.8 3.1 3.1 3.1 3.1 3.1 2.7 1.9 3.8 3.8 3.8 3.8 3.5 2.9 2.0 4.1 4.1 4.1 4.1 3.7 3.1 2.1 32.0 5.7 5.5 5.0 4.4 3.8 3.2 2.2 31.0 5.7 5.7 5.3 4.4 4.1 3.3 2.3 30.0 5.7 5.7 5.5 4.8 4.3 3.5 2.4 28.0 5.7 5.7 5.6 5.3 4.5 3.7 2.6 27.0 5.7 5.7 5.7 5.7 5.7 4.7 4.3 26.0 6.3 6.2 6.0 5.9 5.8 4.9 4.5 25.0 7.0 6.9 6.7 6.6 6.5 5.2 4.7 23.0 8.0 7.9 7.8 7.7 6.8 5.5 5.0 21.0 9.0 9.0 9.0 8.0 7.0 5.7 5.2 20.0 9.0 9.0 9.0 8.3 7.4 5.9 5.4 19.0 9.0 9.0 9.0 8.6 7.6 6.0 5.6 17.0 9.0 9.0 9.0 9.0 7.9 6.4 5.9 16.0 9.0 9.0 9.0 9.0 8.1 6.6 6.3 15.0 9.0 9.0 9.0 9.0 8.3 6.8 6.5 630 WVDC 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 0.9 1.2 1.2 1.2 1.2 1.2 1.2 1.0 1.4 1.4 1.4 1.4 1.4 1.4 1.0 1.7 1.7 1.7 1.7 1.7 1.6 1.1 2.1 2.1 2.1 2.1 2.1 1.7 1.2 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.9 1.9 1.9 1.9 1.9 1.9 1.6 2.3 2.3 2.3 2.3 2.3 2.3 1.8 2.9 2.9 2.9 2.9 2.9 2.9 1.9 3.5 3.5 3.5 3.5 3.5 2.7 1.9 2.8 2.8 2.8 2.8 2.8 2.8 2.3 3.5 3.5 3.5 3.5 3.5 3.3 2.3 4.3 4.3 4.3 4.3 4.3 3.5 2.4 5.0 5.0 5.0 5.0 4.6 3.7 2.5 28.0 6.8 6.3 5.8 5.2 4.5 3.6 2.6 26.0 7.4 6.9 6.3 5.6 4.8 4.0 2.8 25.0 7.8 7.2 6.6 5.9 5.1 4.2 2.9 22.0 8.1 7.5 6.9 6.2 5.3 4.3 3.1 18.0 8.6 7.9 7.3 6.5 5.6 4.6 3.6 Notes Other capacitance values and voltage ratings are available on request (1) Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the "X9" in the Part Number to "X0"; for 5 %, from "X9" to "X5". (2) The peak current pulse capability ot these capacitors is 10 A/F. The maximum rate voltage change is 10 V/s. ORDERING INFORMATION V-730P TYPE 224 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X9 CAPACITANCE TOLERANCE X0 = 20 % X9 = 10 % X5 = 5 % Note (3) At + 85 C, AC RMS ratings for frequencies up to and including 400 Hz correspond to this table: WVDC 100 250 Rated RMS Volts 70 175 Document Number: 42092 Revision: 12-Mar-09 For technical questions, contact: spresale@vishay.com 100 DC VOLTAGE RATING (3) This is expressed in volts. 400 275 630 275 www.vishay.com 27 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000