Document Number: 42092 For technical questions, contact: spresale@vishay.com www.vishay.com
Revision: 12-Mar-09 25
Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene
V-730 P
Vishay Sprague
FEATURES
•Excellent AC performance
•Low power dissipation
•Low dielectric absorption
•Close tolerance
•High stability
•Compliant to RoHS directive 2002/95/EC
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
Voltage Derating: At + 105 °C, 50 % of + 85 °C rating
ESR: 20 kHz to 100 kHz
Capacitance Range: 0.022 µF to 10.0 µF
Capactiance Tolerance: ± 20 %, ± 10 %, ± 5 %
DC Voltage Rating: 100 WVDC to 630 WVDC
AC Voltage Rating: 70 VRMS to 275 VRMS, 60 Hz to 400 Hz
Dissipation Factor: 0.1 % maximum
Measure all units at 1000 Hz, at + 25 °C
DC Voltage Test: 200 % of rated voltage for 2 min
AC Voltage Test: 130 % of rated RMS voltage at 60 Hz for
15 s
Insulation Resistance: Measured at 100 WVDC after a
2 min charge.
At + 25 °C: 200 000 MΩ/µF or 400 000 MΩ minimum
At + 85 °C: 10 000 MΩ/µF or 20 000 MΩ minimum
At + 105 °C: 1000 MΩ/µF or 2000 MΩ minimum
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DC Life Test: 150 % of rated voltage for 1000 h at + 85 °C.
No open or short circuits. No visible damage.
Maximum Δ CAP ± 1.0 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
Humidity Test: 95 % relative humidity at + 40 °C for 250 h.
No visible damage.
Maximum Δ CAP ± 1.0 %
Minimum IR = 20 % of initial limit
Maximum DF = 0.12 %
AC Life Test: 110 % of rated RMS voltage at 60 Hz for
1000 h at + 85 °C.
Maximum Δ CAP ± 5 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
PHYSICAL CHARACTERISTICS
Lead Pull: 5 lb (2.3 kg) for one min. No physical damage.
Lead Bend: After three complete consecutive bends. No
damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
Note
(1) Leads to be within 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge.
DIMENSIONS in inches [millimeters]
L
± 0.062 [1.57]
1.750
[44.45]
Min.
Solid Tinned Wire (1)
0.032 [0.81] Nominal Dia.
(No. 20 AWG)
1.750
[44.45]
Min.
D
Max.
V-730 P
Vishay Sprague Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene
www.vishay.com For technical questions, contact: spresale@vishay.com Document Number: 42092
26 Revision: 12-Mar-09
Notes
Other capacitance values and voltage ratings are available upon request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/µF. The maximum rate voltage change is 10 V/µs.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF) PART NUMBER (1) CASE SIZE
ESR
(mΩ)
20 kHz
to
100 kHz
MAXIMUM RIPPLE CURRENT
(ARMS) at 20 kHz
CASE TEMPERATURE (2) at
D L + 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
100 WVDC
0.22 V-730P224X9100 0.275 [7.0] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.8 1.0
0.27 V-730P274X9100 0.298 [7.6] 0.75 [19.0] - 2.6 2.6 2.6 2.6 2.4 1.9 1.1
0.33 V-730P334X9100 0.324 [8.2] 0.75 [19.0] - 2.8 2.8 2.8 2.8 2.6 2.2 1.2
0.39 V-730P394X9100 0.347 [8.8] 0.75 [19.0] - 3.1 3.1 3.1 3.1 2.9 2.3 1.3
0.47 V-730P474X9100 0.376 [9.6] 0.75 [19.0] 37.0 3.7 3.4 3.1 2.8 2.5 2.0 1.4
0.56 V-730P564X9100 0.321 [8.2] 1.00 [25.4] 35.0 3.9 3.6 3.3 2.9 2.6 2.1 1.5
0.68 V-730P684X9100 0.348 [8.8] 1.00 [25.4] 33.0 4.1 3.8 3.5 3.1 2.8 2.2 1.6
0.82 V-730P824X9100 0.377 [9.6] 1.00 [25.4] 31.0 4.3 4.0 3.6 3.2 2.9 2.3 1.7
1.0 V-730P105X9100 0.421 [10.7] 1.00 [25.4] 26.0 5.5 5.1 4.7 4.2 3.6 2.8 2.6
1.2 V-730P125X9100 0.454 [11.5] 1.00 [25.4] 24.0 5.7 5.3 4.9 4.4 3.8 3.0 2.8
1.5 V-730P155X9100 0.500 [12.7] 1.00 [25.4] 20.0 6.1 5.5 5.1 4.6 4.0 3.2 3.1
1.8 V-730P185X9100 0.541 [13.7] 1.00 [25.4] 19.0 6.3 5.7 5.3 4.8 4.1 3.4 3.0
2.0 V-730P205X9100 0.486 [12.3] 1.25 [31.8] 18.0 6.5 6.0 5.5 4.9 4.2 3.5 3.2
2.2 V-730P225X9100 0.507 [12.9] 1.25 [31.8] 18.0 6.8 6.3 5.7 5.1 4.4 3.6 3.3
2.7 V-730P275X9100 0.554 [14.1] 1.25 [31.8] 17.0 7.1 6.5 6.0 5.3 4.6 3.7 3.4
3.0 V-730P305X9100 0.581 [14.8] 1.25 [31.8] 16.0 7.3 6.7 6.2 5.5 4.8 3.9 3.5
3.3 V-730P335X9100 0.606 [15.4] 1.25 [31.8] 16.0 7.4 6.8 6.4 5.6 4.9 4.0 3.6
3.9 V-730P395X9100 0.654 [16.6] 1.25 [31.8] 15.0 7.6 6.9 6.6 5.8 5.1 4.1 3.7
4.0 V-730P405X9100 0.537 [13.6] 1.75 [44.5] 15.0 7.8 7.0 6.7 5.9 5.2 4.2 3.8
4.7 V-730P475X9100 0.577 [14.7] 1.75 [44.5] 15.0 8.1 7.4 6.8 6.0 5.3 4.3 3.9
5.0 V-730P505X9100 0.593 [15.1] 1.75 [44.5] 14.0 8.3 7.6 7.0 6.2 5.4 4.4 4.0
5.6 V-730P565X9100 0.624 [15.8] 1.75 [44.5] 14.0 8.4 7.7 7.1 6.4 5.5 4.5 4.1
6.0 V-730P605X9100 0.644 [16.4] 1.75 [44.5] 14.0 8.5 7.8 7.2 6.5 5.6 4.6 4.2
6.8 V-730P685X9100 0.682 [17.3] 1.75 [44.5] 13.0 8.5 8.0 7.4 6.7 5.7 4.7 4.3
8.0 V-730P805X9100 0.735 [18.7] 1.75 [44.5] 13.0 8.6 8.3 7.7 6.8 6.0 4.8 4.4
8.2 V-730P825X9100 0.743 [18.9] 1.75 [44.5] 13.0 8.8 8.6 8.0 7.0 6.1 4.9 4.5
10.0 V-730P106X9100 0.815 [20.7] 1.75 [44.5] 12.0 9.0 9.0 8.5 7.6 6.6 5.4 4.9
250 WVDC
0.1 V-730P104X9250 0.279 [7.1] 0.75 [19.0] - 1.5 1.5 1.5 1.5 1.5 1.5 0.9
0.12 V-730P124X9250 0.300 [7.6] 0.75 [19.0] - 1.9 1.9 1.9 1.9 1.9 1.7 1.1
0.15 V-730P154X9250 0.327 [8.3] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.9 1.1
0.18 V-730P184X9250 0.353 [9.0] 0.75 [19.0] - 2.7 2.7 2.7 2.7 2.5 2.0 1.2
0.22 V-730P224X9250 0.306 [7.8] 1.00 [25.4] - 1.9 1.9 1.9 1.9 1.9 1.9 1.3
0.27 V-730P274X9250 0.333 [8.5] 1.00 [25.4] - 2.4 2.4 2.4 2.4 2.4 2.2 1.4
0.33 V-730P334X9250 0.362 [9.2] 1.00 [25.4] - 2.9 2.9 2.9 2.9 2.9 2.3 1.5
0.39 V-730P394X9250 0.389 [9.9] 1.00 [25.4] - 3.4 3.4 3.4 3.2 2.9 2.3 1.6
0.47 V-730P474X9250 0.422 [10.7] 1.00 [25.4] 35.0 3.8 3.7 3.6 3.4 2.9 2.4 1.7
0.56 V-730P564X9250 0.464 [11.8] 1.00 [25.4] 33.0 3.9 3.8 3.7 3.5 3.1 2.5 1.8
0.68 V-730P684X9250 0.425 [10.8] 1.25 [31.8] 32.0 4.0 3.9 3.8 3.7 3.2 2.6 1.9
0.82 V-730P824X9250 0.471 [12.0] 1.25 [31.8] 31.0 4.2 4.1 4.0 3.9 3.4 2.8 2.0
1.0 V-730P105X9250 0.513 [13.0] 1.25 [31.8] 28.0 4.4 4.4 4.4 4.4 4.3 3.5 3.2
1.2 V-730P125X9250 0.554 [14.1] 1.25 [31.8] 27.0 4.7 4.6 4.5 5.0 4.5 3.7 3.3
1.5 V-730P155X9250 0.613 [15.6] 1.25 [31.8] 26.0 5.1 5.0 4.9 5.4 4.7 3.9 3.5
1.8 V-730P185X9250 0.667 [17.0] 1.25 [31.8] 25.0 5.9 5.8 5.7 5.7 5.0 4.1 3.7
2.0 V-730P205X9250 0.700 [17.8] 1.25 [31.8] 21.0 7.2 7.2 6.8 6.0 5.2 4.3 3.9
2.2 V-730P225X9250 0.610 [15.5] 1.75 [44.5] 20.0 8.4 7.5 7.0 6.3 5.4 4.5 4.1
2.7 V-730P275X9250 0.669 [17.0] 1.75 [44.5] 19.0 8.6 7.8 7.3 6.6 5.7 4.7 4.3
3.0 V-730P305X9250 0.703 [17.9] 1.75 [44.5] 18.0 9.0 8.3 7.6 6.8 5.9 4.8 4.4
3.3 V-730P335X9250 0.734 [18.6] 1.75 [44.5] 18.0 9.0 8.4 7.8 7.0 6.0 4.9 4.5
3.9 V-730P395X9250 0.794 [20.2] 1.75 [44.5] 17.0 9.0 8.5 8.0 7.2 6.2 5.0 4.6
4.0 V-730P405X9250 0.803 [20.4] 1.75 [44.5] 16.0 9.0 8.6 8.2 7.4 6.3 5.1 4.7
4.7 V-730P475X9250 0.866 [22.0] 1.75 [44.5] 16.0 9.0 8.8 8.5 7.7 6.6 5.3 4.9
5.0 V-730P505X9250 0.892 [22.7] 1.75 [44.5] 15.0 9.0 9.0 8.8 7.9 6.8 5.6 5.1
5.6 V-730P565X9250 0.941 [23.9] 1.75 [44.5] 15.0 9.0 9.0 8.9 8.0 7.0 5.8 5.3
6.0 V-730P605X9250 0.972 [24.7] 1.75 [44.5] 15.0 9.0 9.0 9.0 8.2 7.2 5.9 5.5
6.8 V-730P685X9250 0.882 [22.4] 2.25 [57.2] 15.0 9.0 9.0 9.0 8.4 7.4 6.0 5.6
8.0 V-730P805X9250 0.953 [24.2] 2.25 [57.2] 14.0 9.0 9.0 9.0 8.7 7.8 6.3 5.8
8.2 V-730P825X9250 0.964 [24.5] 2.25 [57.2] 14.0 9.0 9.0 9.0 8.8 7.9 6.4 5.9
10.0 V-730P106X9250 1.060 [26.9] 2.25 [57.2] 13.0 9.0 9.0 9.0 8.9 8.3 6.8 6.2
Document Number: 42092 For technical questions, contact: spresale@vishay.com www.vishay.com
Revision: 12-Mar-09 27
V-730 P
Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene Vishay Sprague
Notes
Other capacitance values and voltage ratings are available on request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/µF. The maximum rate voltage change is 10 V/µs.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF) PART NUMBER(1) CASE SIZE
ESR
(mΩ)
20 kHz to
100 kHz
MAXIMUM RIPPLE CURRENT
(ARMS) at 20 kHz
CASE TEMPERATURE (2) at
D L + 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
400 WVDC
0.047 V-730P473X9400 0.258 [6.6] 0.75 [19.0] - 1.0 1.0 1.0 1.0 1.0 1.0 0.9
0.056 V-730P563X9400 0.275 [7.0] 0.75 [19.0] - 1.1 1.1 1.1 1.1 1.1 1.1 0.9
0.068 V-730P683X9400 0.297 [7.5] 0.75 [19.0] - 1.4 1.4 1.4 1.4 1.4 1.4 1.0
0.082 V-730P823X9400 0.320 [8.1] 0.75 [19.0] - 1.7 1.7 1.7 1.7 1.7 1.6 1.1
0.1 V-730P104X9400 0.348 [8.8] 0.75 [19.0] - 2.0 2.0 2.0 2.0 2.0 1.9 1.3
0.12 V-730P124X9400 0.299 [7.6] 1.00 [25.4] - 1.4 1.4 1.4 1.4 1.4 1.4 1.4
0.15* V-730P154X9400 0.328 [8.3] 1.00 [25.4] - 1.7 1.7 1.7 1.7 1.7 1.7 1.6
0.18 V-730P184X9400 0.353 [9.0] 1.00 [25.4] - 2.1 2.1 2.1 2.1 2.1 2.1 1.7
0.22 V-730P224X9400 0.385 [9.8] 1.00 [25.4] - 2.6 2.6 2.6 2.6 2.6 2.5 1.8
0.27 V-730P274X9400 0.421 [10.7] 1.00 [25.4] - 3.1 3.1 3.1 3.1 3.1 2.7 1.9
0.33 V-730P334X9400 0.469 [11.9] 1.00 [25.4] - 3.8 3.8 3.8 3.8 3.5 2.9 2.0
0.39 V-730P394X9400 0.503 [12.8] 1.00 [25.4] - 4.1 4.1 4.1 4.1 3.7 3.1 2.1
0.47 V-730P474X9400 0.545 [13.8] 1.00 [25.4] 32.0 5.7 5.5 5.0 4.4 3.8 3.2 2.2
0.56 V-730P564X9400 0.506 [12.9] 1.25 [31.8] 31.0 5.7 5.7 5.3 4.4 4.1 3.3 2.3
0.68 V-730P684X9400 0.551 [14.0] 1.25 [31.8] 30.0 5.7 5.7 5.5 4.8 4.3 3.5 2.4
0.82 V-730P824X9400 0.599 [15.2] 1.25 [31.8] 28.0 5.7 5.7 5.6 5.3 4.5 3.7 2.6
1.0 V-730P105X9400 0.655 [16.6] 1.25 [31.8] 27.0 5.7 5.7 5.7 5.7 5.7 4.7 4.3
1.2 V-730P125X9400 0.712 [18.1] 1.25 [31.8] 26.0 6.3 6.2 6.0 5.9 5.8 4.9 4.5
1.5 V-730P155X9400 0.658 [16.7] 1.75 [44.5] 25.0 7.0 6.9 6.7 6.6 6.5 5.2 4.7
1.8 V-730P185X9400 0.716 [18.2] 1.75 [44.5] 23.0 8.0 7.9 7.8 7.7 6.8 5.5 5.0
2.0 V-730P205X9400 0.752 [19.1] 1.75 [44.5] 21.0 9.0 9.0 9.0 8.0 7.0 5.7 5.2
2.2 V-730P225X9400 0.786 [20.0] 1.75 [44.5] 20.0 9.0 9.0 9.0 8.3 7.4 5.9 5.4
2.7 V-730P275X9400 0.865 [22.0] 1.75 [44.5] 19.0 9.0 9.0 9.0 8.6 7.6 6.0 5.6
3.0 V-730P305X9400 0.909 [23.1] 1.75 [44.5] 17.0 9.0 9.0 9.0 9.0 7.9 6.4 5.9
3.3 V-730P335X9400 0.951 [24.2] 1.75 [44.5] 16.0 9.0 9.0 9.0 9.0 8.1 6.6 6.3
3.9 V-730P395X9400 1.031 [26.2] 1.75 [44.5] 15.0 9.0 9.0 9.0 9.0 8.3 6.8 6.5
630 WVDC
0.022 V-730P223X9630 0.283 [7.2] 0.75 [19.0] - 0.8 0.8 0.8 0.8 0.8 0.8 0.8
0.027 V-730P273X9630 0.307 [7.8] 0.75 [19.0] - 1.0 1.0 1.0 1.0 1.0 1.0 0.9
0.033 V-730P333X9630 0.334 [8.5] 0.75 [19.0] - 1.2 1.2 1.2 1.2 1.2 1.2 1.0
0.039 V-730P393X9630 0.358 [9.1] 0.75 [19.0] - 1.4 1.4 1.4 1.4 1.4 1.4 1.0
0.047 V-730P473X9630 0.388 [9.9] 0.75 [19.0] - 1.7 1.7 1.7 1.7 1.7 1.6 1.1
0.056 V-730P563X9630 0.418 [10.6] 0.75 [19.0] - 2.1 2.1 2.1 2.1 2.1 1.7 1.2
0.068 V-730P683X9630 0.346 [8.8] 1.00 [25.4] - 1.3 1.3 1.3 1.3 1.3 1.3 1.3
0.082 V-730P823X9630 0.374 [9.5] 1.00 [25.4] - 1.6 1.6 1.6 1.6 1.6 1.6 1.6
0.1 V-730P104X9630 0.408 [10.4] 1.00 [25.4] - 1.9 1.9 1.9 1.9 1.9 1.9 1.6
0.12 V-730P124X9630 0.443 [11.3] 1.00 [25.4] - 2.3 2.3 2.3 2.3 2.3 2.3 1.8
0.15 V-730P154X9630 0.496 [12.6] 1.00 [25.4] - 2.9 2.9 2.9 2.9 2.9 2.9 1.9
0.18 V-730P184X9630 0.538 [13.7] 1.00 [25.4] - 3.5 3.5 3.5 3.5 3.5 2.7 1.9
0.22 V-730P224X9630 0.496 [12.6] 1.25 [31.8] - 2.8 2.8 2.8 2.8 2.8 2.8 2.3
0.27 V-730P274X9630 0.542 [13.8] 1.25 [31.8] - 3.5 3.5 3.5 3.5 3.5 3.3 2.3
0.33 V-730P334X9630 0.593 [15.1] 1.25 [31.8] - 4.3 4.3 4.3 4.3 4.3 3.5 2.4
0.39 V-730P394X9630 0.639 [16.2] 1.25 [31.8] - 5.0 5.0 5.0 5.0 4.6 3.7 2.5
0.47 V-730P474X9630 0.696 [17.7] 1.25 [31.8] 28.0 6.8 6.3 5.8 5.2 4.5 3.6 2.6
0.56 V-730P564X9630 0.608 [15.4] 1.75 [44.5] 26.0 7.4 6.9 6.3 5.6 4.8 4.0 2.8
0.68 V-730P684X9630 0.664 [16.9] 1.75 [44.5] 25.0 7.8 7.2 6.6 5.9 5.1 4.2 2.9
0.82 V-730P824X9630 0.724 [18.4] 1.75 [44.5] 22.0 8.1 7.5 6.9 6.2 5.3 4.3 3.1
1.0 V-730P105X9630 0.794 [20.2] 1.75 [44.5] 18.0 8.6 7.9 7.3 6.5 5.6 4.6 3.6
ORDERING INFORMATION
V-730P 224 X9 100
TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING (3)
This is expressed in picofarads. The first two
digits are the significant figures. The third is
the number of zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
This is expressed in volts.
Note (3) At + 85 °C, AC RMS ratings for frequencies up to and including 400 Hz correspond to this table:
WVDC 100 250 400 630
Rated RMS Volts 70 175 275 275
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
