OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 08/2010
Page 1 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Description:
Each isolator in this series consists of an infrared emitting diode and a NPN silicon phototransistor, which are
mounted in a hermetically sealed Surface Mount, 6 Pin package. Devices are designed for military and/or harsh
environments.
The 4N22U, 4N23U and 4N24 U (TX, TXV) devices are processed to MIL-PRF-19500/486. The 4N47 U, 4N48U
and 4N48U (TX, TXV) devices are processed to MIL-PRF-1 9500/548.
Please contact your local representative or OPTEK for more information.
Features:
• Surface Mount (SM), Leadless Chip Carrier (LCC)
• 1 kV electrical isolation
• Base contact provided for conventional transistor biasing
• TX and TXV devices processed to MIL-PRF-19500
RoHS
Applications:
• Military equipment
• High-Reliability environments
• High voltage isolation between
input and output
• Electrical isolation in dirty
environments
• Industrial equipment
• Medical equipment
• Office equipment
Ordering Information
Part
Number Isolation
Voltage (kV) IF (mA)
Typ / Max
VCE
(Volts)
Max
Processing
MIL-PRF-
195000
4N22U
1 10 / 40
35
COTS
4N22UTX 486
4N22UTXV
4N23U COTS
4N23UTX 486
4N23UTXV
4N24U COTS
4N24UTX 486
4N24UTXV
4N47U
45
COTS
4N47UTX 548
4N47UTXV
4N48U COTS
4N48UTX 548
4N48UTXV
4N49U COTS
4N49UTX 548
4N49UTXV
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 08/2010
Page 2 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature -65° C to +150° C
Operating Temperature -55° C to +125° C
Input-to-Output Isolation Voltage(1)(2) ± 1 kVDC
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(3) 260° C
Input Diode
Forward DC Current(4) 50 mA
Reverse DC Voltage 2 V
Power Dissipation(5) 300 mW
Output Photosensor
Collector-Emitter Voltage 35 V
Power Dissipation(6) 100 mW
Emitter-Collector Voltage 7.0 V
Collector Current vs Forward Current vs Temperature
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 5 10 15 20 25
IF - Forward current (mA)
Normalized - IC(ON) - Collector Current (mA)
-55°
-35°
-15°
+5°
+25°
+45°
+65°
+85°
+105°
+125°
Normalized at +25°C and I
F
= 20
Forward Voltage vs Forward Current vs Temperature
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0 5 10 15 20 25
I
F
- Forward Current (mA)
V
F
- Forward Voltage (V)
-55°
-35°
-15°
+5°
+25°
+45°
+65°
+85°
+105°
+125°
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 08/2010
Page 3 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Notes:
(1) Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF.
(2) UL recognition is for 3500 VAC for one minute.
(3) RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering.
(4) Derate linearly 0.67 mA/°C above 25°C.
(5) Derate linearly 0.83 mA/°C above 25°C.
(6) Derate linearly 1.67 mA/°C above 25°C.
Pin # LED Pin # Transistor
2 N/A 3 Collector
1 Anode 4 Base
6 Cathode 5 Emitter
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Diode (See OP165 or OP265 for additional information - for reference only)
VF
Forward Voltage
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
0.80
1.00
0.70
0.80
1.00
0.70
-
-
-
-
-
-
1.30
1.50
1.20
1.50
1.70
1.30
V
IF = 10.0 mA
IF = 10.0 mA, TA = -55° C(1)
IF = 10.0 mA, TA = -100° C(1)
IF = 10.0 mA
IF = 10.0 mA, TA = -55° C(1)
IF = 10.0 mA, TA = -100° C(1)
IR Reverse Current - - 100 µA VR = 2.0 V
Output Photosensor (See OP505 for additional information - for reference only)
V(BR)CEO
Collector-Emitter Breakdown Voltage
4N22U Series
4N47U Series
35
40
80
90
-
-
V
IC = 100 µA, IF = 0
V(BR)ECO
Emitter-Collector Breakdown Voltage
4N22U Series
4N47U Series
4
7
6
10
-
-
V
IE = 100 µA, IF = 0
ICEO Collector-Emitter Dark Current -
-
20
-
100
100
nA
µA
VCE = 20 V, IF = 0 IB= 0 TA = 25°C
VCE = 20 V, IF = 0 IB= 0 TA = 100°C
VCE(SAT) Collector Saturation Voltage - 0.2 0.3 V IF = 20 mA, IC = 2 mA
INCHES
[MILLIMETERS]
DIMENSIONS ARE IN:
6
1 3
5
4
0.050 [1.27]
0.025 [0.64]
0.073 [1.85]
0.245 [6.22]
0.170 [4.32]
Pin 1 Identifier
5
4
3
6
1
2
0.090 [2.29]
0.065 [1.65]
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 08/2010
Page 4 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Coupled
IC/IF DC Current Transfer
Ratio
4N22U
4N23U
4N24U
25
60
100
-
-
-
-
-
-
% IF = 10 mA, VCE = 5 V
4N47U
4N48U
4N49U
50
100
200
-
-
-
-
-
-
% IF = 2 mA, VCE = 5 V
IC(ON) On-State
Collector Current
4N22U
0.15
2.50
1.00
1.00
-
-
-
-
-
-
-
-
mA
VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C
4N23U
0.2
6.0
2.5
2.5
-
-
-
-
-
-
-
-
mA
VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C
4N24U
0.4
10.0
4.0
4.0
-
-
-
-
-
-
-
-
mA
VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C
4N47U
0.5
0.7
0.5
-
-
-
-
-
-
mA
VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C
4N48U
1.0
1.4
1.0
-
-
-
5.0
-
-
mA
VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C
4N49U
2.0
2.8
2.0
-
-
-
10.0
-
-
mA
VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C
VCE(SAT)
Collector
Saturation
Voltage
4N22U
4N23U
4N24U
-
-
-
-
-
-
0.3
0.3
0.3
V
IC = 2.5 mA, IB = 0, IF = 20 mA
IC = 5.0 mA, IB = 0, IF = 20 mA
IC = 10.0 mA, IB = 0, IF = 20 mA
4N47U
4N48U
4N49U
-
-
-
-
-
-
0.3
0.3
0.3
V
IC = 0.5 mA, IB = 0, IF = 2.0 mA
IC = 1.0 mA, IB = 0, IF = 2.0 mA
IC = 2.0 mA, IB = 0, IF = 2.0 mA
hFE DC Current Gain
4N22U
4N23U
4N24U
200
300
400
-
-
-
-
-
- - VCE = 5 V, IC = 10 mA, IF = 0 mA
4N47U
4N48U
4N49U
100
100
100
-
-
-
-
-
-
tr & tf Rise and Fall Time
4N22U
4N23U
4N24U
-
-
-
-
-
-
15
15
20
µs VCC = 10 V, IF = 10 mA, RL = 100Ω,
Pulse width = 100 ms, Duty cycle = 1%
4N47U
4N48U
4N49U
-
-
-
-
-
-
20
20
20
µs VCC = 10 V, IF = 5 mA, RL = 100Ω,
Pulse width = 100 ms, Duty cycle = 1%
RIO Resistance (Input to Output) 1011 - - Ω V
IO = ±1,000 Vdc
CIO - - 5.0 pF VIO = 0 Vdc, f = 1.0 MHz Capacitance (Input to Output)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 08/2010
Page 5 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBO
L PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Coupled
On-State Collector Current
4N22, 4N22A (COTS, TX, TXV)
4N22, 4N22A (COTS, TX, TXV)
4N22, 4N22A (COTS, TX, TXV)
4N22, 4N22A (COTS, TX, TXV)
0.15
2.50
1.00
1.00
-
-
-
-
-
-
-
-
mA
IF = 2.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C(1)
4N23, 4N23A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
0.20
6.00
2.50
2.50
-
-
-
-
-
-
-
-
IF = 2.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C(1)
4N24, 4N24A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
0.40
10.0
4.00
4.00
-
-
-
-
-
-
-
-
IF = 2.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C(1)
4N47, 4N47A (COTS, TX, TXV)
4N47, 4N47A (COTS, TX, TXV)
4N47, 4N47A (COTS, TX, TXV)
0.50
0.70
0.50
-
-
-
-
-
-
IF = 1.0 Ma, VCE = 5.0 V, IB = 0
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C(1)
4N48, 4N48A (COTS, TX, TXV)
4N48, 4N48A (COTS, TX, TXV)
4N48, 4N48A (COTS, TX, TXV)
1.00
1.40
1.00
-
-
-
5
-
-
IF = 1.0 mA, VCE = 5.0 V, IB = 0
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C(1)
4N49, 4N49A (COTS, TX, TXV)
4N49, 4N49A (COTS, TX, TXV)
4N49, 4N49A (COTS, TX, TXV)
2.00
2.80
2.00
-
-
-
10
-
-
IF = 1.0 mA, VCE = 5.0 V, IB = 0
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C(1)
ICB(ON) On-State Collector Base
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
30
-
- µA
VCB = 5 V, IE = 0, IF = 10 mA
VCE(SAT)
Collector-Emitter Saturation Voltage
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N47, 4N47A (COTS, TX, TXV)
4N48, 4N48A (COTS, TX, TXV)
4N49, 4N49A (COTS, TX, TXV)
-
-
-
-
-
-
-
-
-
-
-
-
0.30
0.30
0.30
0.30
0.30
0.30
V
IF = 20 mA , IC = 2.5 mA, IB = 0
IF = 20 mA , IC = 5.0 mA, IB = 0
IF = 20 mA , IC = 10.0 mA, IB = 0
IF = 2.0 mA, IC = 0.5 mA, IB = 0
IF = 2.0 mA, IC = 1.0 mA, IB = 0
IF = 2.0 mA, IC = 2.0 mA, IB = 0
HFE
DC Current Gain
4N22, 4N22A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
200
300
400
100
-
-
-
-
-
-
-
-
V
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
RIO
Resistance (Input-to-Output)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
1011
1011
-
-
-
-
Ω
V10 = ± 1.0 VDC(3)
VI-O = ± 1000 VDC(3)
CIO Capacitance (Input-to-Output) - - 5 pF VI-O = 0 V, f = 1.0 MHz(3)
IC(ON)
